• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.22-28
• /
• 2002

A protection scheme for Unified Power Quality Conditioner (UPQC) is presented and analyzed in this paper. The proposed UPQC has the series active power filter operated as a high impedance k($\Omega$) to the fundamentals when the over current occurs in the power distribution system, and three control strategies are proposed in this paper. The first is the method by detecting the fundamental source current through the p-q theory,［1］ the second is the method by detecting the fundamental component of load current in Synchronous Reference Frame(SRF) and the third is the method by detecting the input voltage. When the over current occurs in the power distribution system, the proposed scheme protects the UPQC without additional protection circuits. The validity of proposed protection scheme is investigated through simulation results.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.611-620
• /
• 2007

The beam-column connection is the critical design section of general steel frame structures owing to the behavioral characteristics of the structural system. As most members of a frame structure are composed of rolled section beams, the cross-section of the beam members is governed by the negative bending moment near beam-column connections. Such a design concept leaves a redundant load-carrying capacity at the positive bending regions of the beam members leading to design inefficiency. Therefore, it is of utmost importance to redistribute the beam end moments and reduce the stresses at the beam-column connections for a more efficient design of steel frame structures. In this study, reaction-moment prestressing method (RMPM) was proposed for the innovative design and construction of steel frame structures. The RMPM is a prestressing method utilizing the elastic bending deformation of a beam member induced by temporary prestressing for the distribution of a relatively large bending moment to other sections for the efficient use of the beam section. By the application of the RMPM, the negative bending moment at the beam-column connections can be significantly reduced, ultimately leading to possible use of smaller beam sections. Through a series of model tests and numerical analyses of steel frame structures, the moment distributing effect and feasibility of the RMPM was verified.

• Steel and Composite Structures
• /
• v.7 no.2
• /
• pp.161-184
• /
• 2007

The use of composite semi-rigid connections is not fully exploited, in spite of its great number of advantages. Composite semi-rigid connections may lead to an optimal moment distribution that will render lighter structures. Furthermore, using the appropriate semi-rigid connection design, the stability of the frames against lateral loads may entirely rely on the joint stiffness, thus avoiding bracing systems and permitting more diaphanous designs. Although modern codes, such as the Eurocode 4 (EC4), propose thorough methods of analysis they do not provide enough insight and simplicity from the design point of view. The purpose of this paper is to introduce practical and efficient methods of analysis that will facilitate the work of a structural analyst starting from the global analysis of the composite frame and ending on the final connection design. A key aspect is the definition of the stiffness and strength of the connections that will lead to an optimal moment distribution in the composite beams. Two examples are presented in order to clarify the application of the proposed methods and to demonstrate the advantages of the semi-rigid composite design with respect to the alternative pinned and rigid ones. The final aim of the paper is to stimulate and encourage the designer on the use of composite semi-rigid structures.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.1
• /
• pp.33-43
• /
• 2018

'Seismic Performance Evaluation Method for Existing Buildings (2013)' developed in accordance with the overseas guidelines ASCE 41 - 06 is the most widely used procedure among domestic seismic performance evaluation guidelines in Korea. However, unlike ASCE 41 - 06, it stipulates that the final performance should be derived as the gravity load distribution ratio of the lateral force resistance system in the guideline. Therefore, in the case of a dual steel structure system with slender braces, where the internal moment frame is mostly responsible for the gravity load, the evaluation of slender braces based on gravity load distribution ratio is difficult to be achieved. In this research, we propose an objective evaluation process for such system by evaluating seismic performance for large-scale factory facilities as an example.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.830-835
• /
• 1994

In this paper, a new method of statistically evaluating an output response probability distribution of a memory type non-linear system is practically derived based on a zero-memory type non-linear equivalent system. That is, first, the objective system is approximately and functionally separated into two functional parts, i.e., a zero-memory type non-linear part and a memory type linear part according to the well-known Wiener's idea. A whole mathematical frame of the output probability distribution is evaluated in an approximate but generalized form, based on the equivalent zero-memory type non-linear part. The memory effects between the input and the output of the system are reflected in the statistical parameters and the expansion coefficients.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.680-690
• /
• 2013

In this paper, we propose a real-time temporal synchronization and compensation algorithm in stereoscopic video. Many temporal asynchronies are caused in the video editing stage and due to different transmission delays. These temporal asynchronies can degrade the perceived 3D quality. The goal of temporal alignment is to detect and to measure the temporal asynchrony and recover synchronization of the two video streams. In order to recover synchronization of the two video streams, we developed a method to detect asynchronies between the left and the right video streams based on a novel spatiogram information, which is a richer representation, capturing not only the values of the pixels but their spatial relationships as well. The proposed novel spatiogram additionally includes the changes of the spatial color distribution. Furthermore, we propose a block-based method for detection of the pair frame instead of one frame-based method. Various 3D experiments demonstrate the effectiveness of the proposed method.

• Journal of Korean Library and Information Science Society
• /
• v.16
• /
• pp.129-157
• /
• 1989

Through this study, some considerations to be taken into account in order to construct the user model for the user friendly system which can provide each individuals user armed with varied intellectual level with the relevant information, can be summarized as follows : (1) The user' ability to use the system and users' subject knowledge, the distribution of the users' level knowledge should be considered for the decision of the typed of interaction between the users and the system. (2) the knowledge of the user models should include the following kinds of knowledge inharmony with one another, 1. Standard user knowledge which represents a general characteristic of user group, 2. individual user knowledge which represents an individual's unique characteristic, 3. Long-term user knowledge which represents the education level and subject background of users, 4. short-term user knowledge which represents the purpose of information science and information need by users (3) As knowledge generation technique, both the implicit method and explicit method should be a n.0, pplied, observation of the system during the interaction, and explicit method generates the knowledge by the user's answering the questions already made by the system. (4) The frame technique as the knowledge representation for the user-modelling in which user-knowledge is represented in a limited situation and in a qualitative aspects, can be recommended. The frame is adequated for the explanation of structured situation, and for the processing the present situation by inferring the previous experiences.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.227-235
• /
• 2006

In this paper a robust image processing method with modified Otsu algorithm to recognize the road lane for a real-time controlled autonomous vehicle is presented. The main objective of a proposed method is to drive an autonomous vehicle safely irrespective of road image qualities. For the steering of real-time controlled autonomous vehicle, a detection area is predefined by lane segment, with previously obtained frame data, and the edges are detected on the basis of a lane width. For stable as well as psudo-robust autonomous driving with "good", "shady" or even "bad" road profiles, the variable threshold with modified Otsu algorithm in the image histogram, is utilized to obtain a binary image from each frame. Also Hough transform is utilized to extract the lane segment. Whether the image is "good", "shady" or "bad", always robust and reliable edges are obtained from the algorithms applied in this paper in a real-time basis. For verifying the adaptability of the proposed algorithm, a miniature vehicle with a camera is constructed and tested with various road conditions. Also, various highway road images are analyzed with proposed algorithm to prove its usefulness.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1282-1286
• /
• 1999

This paper presents the DQ transfomation and space vector modulation method to develop a control algorithm of distribution STATCON(STATic CONdenser) for line voltage regulation, dc link voltage regulation and harmonics compensation. The Performance analysis of a PI with ramp comparision and synchronous reference frame current controller is carried out. Based on these analysis, the control performances are desirable to compensate the harmonics and to regulate de link and line voltage of Distribution line.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.994-998
• /
• 1987

We calculated the expected length of jumper wires on MDF(Main Distribution Frame) in case of random jumper assignment, and from the calculated results we considered an optimal method of terminal arrangement and terminal expansion for keeping the length of jumper wires short, where MDF is a large frame-work installed in a telephone office for accommodating the terminals which are used for connecting the outside facilities to the inside facilities of the telephone office. We also showed the jumper saving effect in modular frames.