• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.58-66
• /
• 2010

Topology design optimization is a method to determine the optimal distribution of material that yields the minimal compliance of structures, satisfying the constraint of allowable material volume. The method is easy to implement and widely used so that it becomes a powerful design tool in various disciplines. In this paper, a large-scale topology design optimization method is developed using the efficient adjoint sensitivity and optimality criteria methods. Parallel computing technique is required for the efficient topology optimization as well as the precise analysis of large-scale problems. Parallelized finite element analysis consists of the domain decomposition and the boundary communication. The preconditioned conjugate gradient method is employed for the analysis of decomposed sub-domains. The developed parallel computing method in topology optimization is utilized to determine the optimal structural layout of human powered vessel.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.7-18
• /
• 2012

Full-scale static test was introduced for the KC-100 aircraft which is domestic civil aircraft to be certified for the first time. Test requirement, test frame, and important test stystems such as loading system, counterbalance system, restraint system and jacking system are explained in detail. Especially, the way to satisfy compliance for the installation of test article and loading system is introduced by using check sheets for the installations. 15 Full-scale and 7 local test conditions were successfully completed and the test data was obtained.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.578-583
• /
• 2006

This paper introduces conceptual design of scroll expander-compressor unit for fuel cell. Since air discharged out of the fuel cell stack after reaction has still high pressure energy, some power can be extracted out of it by directing it to pass through an expanding device so that the extracted power can be used to drive an auxiliary compressor. For this purpose, a scroll type expander coupled to a scroll type compressor was designed: orbiting scroll of the expander and that of the compressor were made to share three of common drive pins installed in the mid frame plate, and central cavity in the mid-plate was used as a back pressure chamber to provide axial compliance for both orbiting scrolls. Performance analysis for the expander showed that the shaft power of the expander could reduce the auxiliary power consumption in the fuel cell by about one third at the scroll clearance of $10{\mu}m$.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.751-760
• /
• 2007

The purpose of this study is to evaluate the seismic performance of the frame which is assumed to be used with Welded Unreinforced Flange-Bolted web (WUF-B) connections and detailed in compliance with FEMA 350 recommended seismic design criteria. In FEMA 350, these types of connections are only valid for Ordinary Moment-Resisting Steel Frames (OMRSFs). For this purpose, based on test results, we proposed an analytical model for the Post-Northridge WUF-B connections with different panel zone strength ratios. Using the connection model, SAC Phase II three and nine-story frames were modeled and analyzed. From a nonlinear static pushover analysis, ductility, maximum strength, and the maximum interstory drift ratio were investigated for buildings with Post-Northridge details. Moreover, the maximum interstory drift ratio of each performance level (IO and CP) was also investigated through Incremental Dynamic Analysis (IDA). Analytical results were compared with those of buildings with either Pre-Northridge connection or ductile connections with no fracture. The analytical results showed that buildings with Post-Northridge WUF-B connections provide superior strength and interstory drift ratio capacity than buildings with Pre-Northridge WUF-B connections.

• Journal of Korean Academy of Nursing
• /
• v.30 no.1
• /
• pp.194-201
• /
• 2000

The propose of the study is to try to support the practice of caring suitable for our cultural emotion by cognating the meaning of caring related to health which is melted in korean culture. Concrete purposes were as followings; to first, confirm the caring of civilian in Kangwon-do, to secondly search the caring in the traditional culture idea, and to thirdly present the conceptual frame about the caring. The methodology of this research is the ethnography to use the depth interview and the participative observation. The geographical area of this research was in Wichon-ri, Songsan- myon, Study participants were, 6men and 18women, totally 24 persons. Their average age was 72.6 years old. The period of data collection was from January, 1998 to April, 1999, which original data became saturation. Data collection was done after accept allowance of the participants, their stories were recorded in cassettee, by the way of the Spradley analysis was applied and adjusted. The results which was analyized as domain, category and property were as following; First, the category was the life serving other persons, which is the for mind, the benefiting one, the comprehensive one, the respective one, on soon. Second, the category was the controling life, and its property was the moderate mind, that is, vegetables were tried to be fed moderately, pleasantly and comfortable. Thirdly, the category was the eagerness life, and the properties were diligent mind, and mind which accomplished the complete resposibility. Fourth, the category was a happy life, and the properties were positive mind, satisfying one, thankful one, one of their ancestors benefit, and supplicatory one. Fifth, the category was the accepting life, and the properties were the submissive mind, resign one. Sixth, the category was the joint life all together and the properties were the harmonized mind, and the mutual helping one. Seventh, the category was the ruling life, and the properties were the pure mind, the ones which controls the body, the mind, the nature; which could surely confirmed the source of the life that lived with the nature, the native idea of our people. Eighth, the category was the retaining life, and the properties were the inherits the native custom, and the one that keep public morals. According to the result of examining the caring in ethnography, the general caring was performed the conceptual frame about the caring which is related to health was found in the principle of consideration, harmony, compliance, and transcendence.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.1-6
• /
• 2016

As manufacturing industries become globalized, product design affects every area of organization. The design sets the goals for a number of different departments, so if it fails to effectively communicate these goals, the entire organization is less efficient. In addition, To communicate clearly, the design must represent a product that meets its technical specification. GD&T (Geometric Dimensioning and Tolerancing) is one of the most important factors, which has an effect on efficiency of manufacture system, in designing products. However, most of designers in different industries are prone to ignore the importance of GD&T. To analyse the importance of GD&T compliance with international standards for design drawing, a comparison analysis of the difference between two methods, composite profile control and multiple single segment profile control, is performed on three different cases and suggests how it used to be more suitable. Composite profile tolerance is specified by a dual feature control frame that has one profile symbol specified with two lines of tolerance information. Whereas a multiple single segment profile control is when two or more single segment profile callouts are used to define the location and/or orientation and/or size and/or form of a part feature. In this study, the following results will be provided : a clear definition and an obvious difference of the tolerance zone, datums and datums sequence and minimization of tolerances. On this study, composite profile tolerance and multiple single segment profile tolerance were discussed. Next steps of research will consist on reaching more accurate results for profile control. Further research will be focused on dealing with the remaining 14 symbols of GD&T.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.82-97
• /
• 2001

In this paper, we describe a software implementation of a digital TV stream analyzer that can be used for analyzing and verifying digital TV bitstreams on personal computes. It accepts as input MPEG-2 transport streams (TS's) already stored on hard disks and doesn't require any special hardware. After classifying TS packets into program specific information(PSI) TS section auido, video, program clock reference (PCR) private data and null packets, it displays their contents through a graphic user interface along with the syntax elements of the TS header. Also it displays the decoded I frame nearest in time axis the TS packet currently shown This feature helps pin pointing the specific location of problematic parts in bitstreams. The bitsteam analyzer provides the compliance test of MPEG-2 Systems standard and the data injection functionality with which one can easily insert additional data to existing MPEG-2 bitstreams. Using the resulting system one can produce at low test streams for interactive broadcasting and data broadcasting for laboratory use.

• Earthquakes and Structures
• /
• v.13 no.3
• /
• pp.267-277
• /
• 2017

Base-isolation is now being adopted as a retrofitting strategy to improve seismic behaviour of reinforced concrete (r.c.) framed structures subjected to far-fault earthquakes. However, the increase in deformability of a base-isolated framed building may lead to amplification in the structural response under the long-duration horizontal pulses of high-magnitude near-fault earthquakes, which can become critical once the strength level of a fire-weakened r.c. superstructure is reduced. The aim of the present work is to investigate the nonlinear seismic response of fire-damaged r.c. framed structures retrofitted by base-isolation. For this purpose, a five-storey r.c. framed building primarily designed (as fixed-base) in compliance with a former Italian seismic code for a medium-risk zone, is to be retrofitted by the insertion of elastomeric bearings to meet the requirements of the current Italian code in a high-risk seismic zone. The nonlinear seismic response of the original (fixed-base) and retrofitted (base-isolated) test structures in a no fire situation are compared with those in the event of fire in the superstructure, where parametric temperature-time curves are defined at the first level, the first two and the upper levels. A lumped plasticity model describes the inelastic behaviour of the fire-damaged r.c. frame members, while a nonlinear force-displacement law is adopted for the elastomeric bearings. The average root-mean-square deviation of the observed spectrum from the target design spectrum together with a suitable intensity measure are chosen to select and scale near- and far-fault earthquakes on the basis of the design hypotheses adopted.

• Analyses & Alternatives
• /
• v.7 no.3
• /
• pp.61-84
• /
• 2023

In this paper, I tried to clarify the background of the strengthening of centralization in the central-local relations during the Xi Jinping period in terms of the institutional structure of elite politics through a comparative study of the composition of the provincial sector of the Politburo, the highest power body, during the time of Hu Jintao and Xi Jinping. Compared to the Hu Jintao period, it is judged that the strengthening of centralization in the Xi Jinping era is being implemented not through the neutralization of institutionalized formal construction norms, but through the expansion of control within the norms. In other words, the institutionalized frame itself was not broken in the composition of the provincial sector of the Politburo, and local compliance with the central government centered on the general secretary was increased by exercising the right to control personnel more strongly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.1
• /
• pp.71-79
• /
• 2024

In compliance with environmental regulations at sea and the introduction of unmanned autonomous ships, electric propulsion ships are garnering significant attention. Induction machines used as propulsion electric motor (PEM) have maintenance advantages, but speed control is very complicated and difficult. One of the most commonly used techniques for speed control is DTC (direct torque control). DTC is simple in the reference frame transformation and the stator flux calculation. Meanwhile, two-level and three-level voltage source inverters (VSI) are predominantly used. The three-level VSI has more flexibility in voltage space vector selection compared to the two-level VSI. In this paper, speed is controlled using the DTC method based on the specifications of the PEM. The speed controller employs a PI controller with anti-windup functionality. In addition, the characteristics of the two-level VSI and three-level VSI are compared under identical conditions. It was confirmed through simulation that proper control of speed and torque has been achieved. In particular, the torque ripple was small and control was possible with a low DC voltage at low speed in the three-level VSI. The study confirmed that the application of DTC, using a three-level VSI, contributes to enhancing the system's response performance.