• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.3-10
• /
• 2010

이 연구에서는 중력 전단비에 따른 철근콘크리트 플랫 플레이트 골조의 내진성능을 평가하였다. 이를 위하여, 이 연구에서는 3층, 7층 골조를 중력하중만 고려하여 설계하고, 대상 건물에 대한 비선형 정적 푸쉬 오버 해석과 비선형 동적 해석을 수행하였다. 그리고 이 연구는 그 비선형 해석에서 중력 전단비의 차이에 따른 뚫림 전단과 파괴 메커니즘을 예측할 수 있도록 제안한 슬래브-기둥 접합부 모델을 사용하였다. 이 연구 결과에 따르면 중력 전단비가 골조의 내진성능에 큰 영향을 미치는 것으로 나타났다. 특히 중력 전단비가 커짐에 따라 골조 접합부의 파괴가 취성적인 파괴를 나타내어 내진 성능이 떨어지는 것으로 나타났다.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.441-451
• /
• 2002

최근에 급증하고 있는 주상복합 건물은, 건물의 특징상 상부는 전단벽 구조, 하부는 라멘구조로 구성되는 경우가 많으며, 그 구조적 취약성을 고려하여 많은 연구자들에 의해 효율적인 해석방법이 연구되어 왔다. 그러나 이러한 일련의 연구성과는 지나치게 이론에 치우치거나, 전이층 해석에 필수적인 횡력에 대한 고려가 되어있지 않으며 실제 구조설계에 적용하기 어려운 비선형 프로그램을 사용하여 수행되어, 구조설계 실무에 적용하기는 매우 어려운 형편이다. 따라서 본 논문은 기존 구조해석 실무에서 전이층 해석시 통상 사용되어지는 방법과 정밀해석 모델의 비교분석을 통해 실무에서 적용되는 모델링 방법에서 주의해야 할 점을 도출하였다. 특히 실제 구조설계 실무에서 중력하중 뿐만 아니라 지진 하중 해석에서도 보다 정밀하고 간편하게 활용될 수 있는 제안모델을 제시하여 정밀해석 모델과, 기존실무에서 사용되는 해석방법과 비교, 분석함으로서 그 유용성을 확인하였다

• 한국지진공학회논문집
• /
• 제8권3호
• /
• pp.97-103
• /
• 2004

철골 중심가새골조의 경우 접합비용의 절감을 위해 가새가 설치된 스팬을 제외한 기둥들은 통상 중력기둥으로 설계된다. 따라서 중력기둥이 미치는 P-${\Delta}$ 효과를 내진성능 평가에 적절히 반영할 필요가 있다. 본 연구에서는 철골 중심가새골조의 중력기둥이 유발하는 P-${\Delta}$ 효과를 가상의 의지기둥(leaning column) 개념에 의해 간편하게 모델링할 수 있는 해석기법을 예시하였다. 역V형 가새골조를 사례로 하여 FEMA 273의 비선형정적해석법에 의한 내진성능평가를 수행하고 동적 P-Δ 증폭계수 적용에 있어서의 문제점을 지적하였다. 본 연구의 결과에 의할 때 P-${\Delta}$ 효과는 중심가새골조의 내진성능평가에 무시할 수 없는 영향이 있는 것으로 밝혀졌다. 아울러 기존연구에서 제시된 인장보강재에 의한 역V형 가새골조의 보강법은 내진성능향상에 매우 효과적임을 확인하였다.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.761-778
• /
• 2015

The objective of this paper is to report the result of an experimental program conducted on the strengthening of nonductile RC frames by using external mesh reinforcement and plaster application. The main objective was to test an alternative strengthening technique for reinforced concrete buildings, which could be applied with minimum disturbance to the occupants. Generic specimen is two floors and one bay RC frame in 1/2 scales. The basic aim of tested strengthening techniques is to upgrade strength, ductility and stiffness of the member and/or the structural system. Six specimens, two of which were reference specimens and the remaining four of which had deficient steel detailing and poor concrete quality were strengthened and tested in an experimental program under cyclic loading. The parameters of the experimental study are mesh reinforcement ratio and plaster thickness of the infilled wall. The effects of the mesh reinforced plaster application for strengthening on behavior, strength, stiffness, failure mode and ductility of the specimens were investigated. Premature and unexpected failure mode has been observed at first and second specimens failed due to inadequate plaster thickness. Also third strengthened specimen failed due to inadequate lap splice of the external mesh reinforcement. The last modified specimen behaved satisfactorily with higher ultimate load carrying capacity. Externally reinforced infill wall composites improve seismic behavior by increasing lateral strength, lateral stiffness, and energy dissipation capacity of reinforced concrete buildings, and limit both structural and nonstructural damages caused by earthquakes.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.165-170
• /
• 2010

Super high-rise mixed use buildings require a longer period for construction. Especially finishing work takes up about 40% of the whole construction period. Thus, finishing work is becoming an important factor in determining the construction period along with earth work and frame work. As the expected returns added by the reduction of the period and cost in constructing super high-rise mixed use buildings are huge, the expectations are now increasing for the possible gains. In this respect, as the period of finishing work is easier to be shortened than that of frame work, the efforts to acquire the technical knowledge to reduce the finishing work period are now being required. Accordingly, in this study, we aimed at suggesting the basic data for designing an economic plan for finishing-work procedure by analyzing the productivity of each work type of finishing work procedure on the basis of the execution and results of a construction method as a time-flexible finishing work plan. For this, we categorized the work types of finishing work procedure into each work unit and provided a work-system for each of them. Also, with case studies, we calculated the detailed amounts of the work-loads, required materials, productivity, and productivity index of the main work types of finishing work procedure and each of their separate work units as well as analyzed the relationship between the value results to suggest a better way to improve its productivity.

• Earthquakes and Structures
• /
• 제16권5호
• /
• pp.611-623
• /
• 2019

A set of mid-rise bare and uniformly infilled reinforced-concrete frame buildings are analyzed for two different seismic intensities of ground-motions (i.e., 'Design Basis Earthquake' and 'Maximum Considered Earthquake') to study their floor response. The crucial parameters affecting seismic design force for acceleration-sensitive non-structural components are studied and compared with the guidelines of the European and the United States standards, and also with the recently developed NIST provisions. It is observed that the provisions of both the European and the United States standards do not account for the effects of the period of vibration of the supporting structure and seismic intensity of ground-motions and thereby provides conservative estimates of the in-structure amplification. In case of bare frames, the herein derived component amplification factors for both the design basis earthquake and the maximum considered earthquake exceeds with their recommended values in the European and the United States standards for non-structural components having periods in vicinity of the higher modes of vibration, whereas, in case of infilled frames, component amplification factors exceeds with their recommended value in the European standard for non-structural components having periods in vicinity of the fundamental mode of vibration, and only for the design basis earthquake. As a consequence of these observations, as well as capping on the design force (in case of United states standard and NIST provisions), in case of the design basis earthquake, the combined amplification factor is underestimated for non-structural components having periods in vicinity of the higher modes of vibration of bare frames, and also for non-structural components having periods in vicinity of the fundamental mode of vibration of infilled frames. At the maximum considered earthquake demand, excepting non-structural components having periods in vicinity of the higher modes of vibration of bare frames, all provisions generally provide conservative estimates of the design floor accelerations.

• Earthquakes and Structures
• /
• 제24권5호
• /
• pp.353-364
• /
• 2023

In this study, a method has been proposed for the static and dynamic nonlinear analysis of multi-storey buildings, which takes into account the contribution of axial deformations in vertical load-bearing elements, which are especially important in tall and narrow structures. Shear deformations on the shear walls were also taken into account in the study. The presented method takes into account the effects that are not considered in the fishbone and flexural-shear beam models developed in the literature. In the Fishbone model, only frame systems are modeled. In the flexural shear beam model developed for shear wall systems, shear deformations and axial deformations in the walls are neglected. Unlike the literature, with the model proposed in this study, both shear deformations in the walls and axial deformations in the columns and walls are taken into account. In the proposed model, multi-storey building is represented as a sandwich beam consisting of Timoshenko beams pieced together with a double-hinged beam. At each storey, the total moment capacities of the frame beams and the coupled beams in the coupled shear walls are represented as the equivalent shear capacity. On the other hand, The sums of individual columns and walls moment at the relevant floor level are represented as equivalent moment capacity at that floor level. At the end of the study, examples were solved to show the suitability of the proposed method in this study. The SAP2000 program is employed in analyses. In a conclusion, it is observed that among the solved examples, the proposed sandwich beam model gives good results. As can be seen from these results, it is seen that the presented method, especially in terms of base shear force, gives very close results to the detailed finite element method.

• Earthquakes and Structures
• /
• 제19권3호
• /
• pp.157-174
• /
• 2020

The in-situ pushover test differs from the shake-table test because it is performed outdoors and thus its size is not restricted by space, which allows us to test a full-size building. However, to build a new full-size building for the test is not economical, consequently scholars around the world usually make scale structures or full-scale component units to be tested in the laboratory. However, if in-situ pushover tests can be performed on full-size structures, then the seismic behaviors of buildings during earthquakes can be grasped. In view of this, this study conducts two in-situ pushover tests of reinforced concrete (RC) buildings. One is a masonry-infilled RC building with openings (the openings ratio of masonry infill wall is between 24% and 51%) and the other is an RC building without masonry infill. These two in-situ pushover tests adopt obsolescent RC buildings, which will be demolished, to conduct experiment and successfully obtain seismic capacity curves of the buildings. The test results are available for the development or verification of a seismic evaluation model. This paper uses ASCE 41-17 as the main evaluation model and is accompanied by a simplified pushover analysis, which can predict the seismic capacity curves of low-rise buildings in Taiwan. The predicted maximum base shear values for masonry-infilled RC buildings with openings and for RC buildings without masonry infill are, respectively, 69.69% and 87.33% of the test values. The predicted initial stiffness values are 41.04% and 100.49% of the test values, respectively. It can be seen that the ASCE 41-17 evaluation model is reasonable for the RC building without masonry infill walls. In contrast, the analysis result for the masonry infilled RC building with openings is more conservative than the test value because the ASCE 41-17 evaluation model is limited to masonry infill walls with an openings ratio not exceeding 40%. This study suggests using ASCE 41-17's unreinforced masonry wall evaluation model to simulate a masonry infill wall with an openings ratio greater than 40%. After correction, the predicted maximum base shear values of the masonry infilled RC building with openings is 82.60% of the test values and the predicted initial stiffness value is 67.13% of the test value. Therefore, the proposed method in this study can predict the seismic behavior of a masonry infilled RC frame with large openings.

• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.263-269
• /
• 2013

본 논문에서는 건물의 횡방향 구조반응을 평가하기 위한 변형률 기반의 모니터링 기법이 제시되고, 이에 대한 기초 연구로써, 구조해석을 통해 제안된 기법을 검증한다. 광섬유 격자 센서(fiber Bragg grating, FBG)는 일반 변형률 센서와 비교하여 내구성이 뛰어날 뿐 아니라 높은 샘플링 수와 여러 지점을 동시에 계측할 수 있는 장점이 있다. 이러한 특성 때문에 FBG 센서는 구조 모니터링을 위해 많은 센서가 요구되는 건물의 모니터링에 적합하다. 본 연구에서 FBG 센서는 수직 부재의 변형률을 계측하며, 이는 해당 부재의 곡률을 평가한다. 이러한 곡률은 횡변위와 횡가속도를 평가하는데 사용된다. 추가적으로 횡방향 가속도는 frequency domain decomposition(FDD) 기법을 이용하여 구조물의 고유진동수와 모드형상을 추정하는데 사용된다. 9층 철골모멘트 골조 예제의 적용을 통해, 제시된 기법이 건물의 다양한 횡방향 구조 반응과 동적 특성을 평가하는데 적절함을 확인하였다.

• 한국지진공학회논문집
• /
• 제11권2호
• /
• pp.57-68
• /
• 2007

메가골조시스템은 사용되는 구조재료를 절약하면서도 구조물의 강성을 효과적으로 높일 수 있는 장점 때문에 고층건물의 설계에 많이 사용되고 있다. 이러한 메가골조시스템이 주로 적용되고 있는 초고층건물의 구조설계에서는 횡하중에 대한 거주자의 불안감을 최소화시키는 것이 주요한 관심사중의 하나이다. 따라서 본 연구에서는 메가골조구조물의 사용성을 향상시키기 위한 방법으로 일반적인 수동 TMD의 제어성능을 개선한 준능동 TMD(STMD)를 사용하였다. 이를 위하여 TMD에서 일반적으로 사용되고 있는 수동감쇠기 대신 준능동 MR 감쇠기를 사용하여 STMD를 구성하였다. 메가골조구조물의 일반적인 유한요소해석모델은 매우 많은 수의 자유도로 구성되어 있기 때문에 원형모델을 사용하여 STMD의 제어성능을 검토하는 것은 현실적으로 불가능하다. 따라서 메가골조구조물의 동적 거동을 정확하게 표현할 수 있는 최소한의 자유도를 가진 응축모델을 행렬응축기법을 이용하여 제안하였다. 또한 일반적인 행렬응축기법의 효율성을 향상시키기 위하여 메가골조구조물의 특성을 활용한 다단계 행렬응축기법을 제안하였다. 본 연구에서 제안된 응축모델을 사용한 제어의 효율성과 정확성 및 메가골조구조물에 대한 STMD의 제어성능을 예제해석을 통하여 검증하였다.