• 제목/요약/키워드: fracture zone

검색결과 757건 처리시간 0.029초

경량기포콘크리트의 편면동결융해 및 탄산화에 관한 연구 (A Study on the One Side Freezing /Thaw and Carbonation of Autoclaved Lightweight Concrete)

  • 노재성;황의환;홍성수;이범재
    • 콘크리트학회지
    • /
    • 제7권4호
    • /
    • pp.149-156
    • /
    • 1995
  • 경량기포콘크리트(ALC : Autoclaved Lightweight Concrete)의 내구성을 개선하기 위하여 투숩 및 투수, 편면동결융해 특성과 탄산화 특성을 실험하였다. 국산 ALC전용마감재는 방수용 도장재에 가까운 투습 및 투수성질을 갖고 있어 특성의 개선이 요구된다. 편면동결융해시험에서 마감재의 투습도에 따른 열화위치는 투습도가 클수록 외측에서 발생하였으나 투수에 의한 외부의 박리열화는 관찰되자 않았다. 탄산화는 수분의 함량이 작을수록 빠르게 진행되었으며 탄산화가 진행됨에 따라 기공량은 감소하였다. 탄산화가 완전히 진행되면 부피의 팽창으로 균열이 발생하였다.

A Study on Investigation for Effectiveness of Natural Minerals with Silica-Component as Admixture for Concrete

  • 김화중
    • 콘크리트학회지
    • /
    • 제6권3호
    • /
    • pp.201-214
    • /
    • 1994
  • 본 연구는 콘크리트용 혼화재로서 우리나라에 풍부한 천연 실리카 질 광물을 이용하여 콘크리트의 강도증진 가능성 및 유용성과 경제적인 효율성에 대해 검토한 것이다. 제반 실험을 통해 얻어진 결론을 요약하면 다음과 같다. \circled1 최적의 제오라이트 치환율은 단위 시멘트당 5~10% 정도를 나타났으며, 그 때의 강도 증진율은 무첨가 콘크리트 값에 비해 대체적으로 40%정도의 강도증진 효과를 얻었다. \circled2 최적의 이암 치환율은 단위 시멘트량당 10~15% 정도로 나타났으며, 그때의 강도 증진율은 무첨가 콘크리트 값에 비해 대체적으로 10%정도의 강도증진 효과를 얻었다. 이러한 검토로부터 우리는 혼화재로서 콘크리트의 강도성능의 향상을 목적으로 기존의 실리카 흄, 플라이 애쉬 등의 대체품으로 천연 실리카 광물을 활용할 수 있다는 결론을 얻었다.

해양구조용 강재의 국부취화영역에 관한 연구 (Local brittle zone of offshore structural steel welds)

  • 김병천;엄정현;이종섭;이성학;이두영
    • Journal of Welding and Joining
    • /
    • 제7권2호
    • /
    • pp.35-48
    • /
    • 1989
  • This study is concerned with a correlation of microstructure and local brittle zone (LBZ) in offshore structural steel welds. The influence of the LBZ on fracture toughness was investigated by means of simulated heat-affected zone (HAZ) tests as well as welded joint tests. Micromechanical processes involved in void and cleavage microcrack formation were also identified using notched round tensile tests and subsequent SEM observations. The LBZ in the HAZ of a multiphase welded joint is the interstitially reheated coarse grained HAZ, which is influenced by metallurgical factors such as effective grain size, the major matrix structure and the amount of high-carbon martensite-austenite (M-A) constituents. The experimental results indicate that Chirpy energy was found to scale monotonically with the amount of M-A constituents, confirming that the M-A constituent is the major microstructural factor controlling the HAZ toughness. In addition, voids and microcracks are observed to initiate at M-A constituents by the shear cracking process. Thus, the M-A constituent played an important role in initiating the voids and microcracks, and consequently caused brittle fracture.

  • PDF

計裝化 샬피 시험법 에 의한 알루미늄 합금 용접부 의 동적파괴 인성 (The dynamic fracture toughness of aluminum alloy weld zone by instrumented charpy test)

  • 문경철;강락원;이준희
    • Journal of Welding and Joining
    • /
    • 제3권2호
    • /
    • pp.42-51
    • /
    • 1985
  • The dynamic fracture toughness, fracture characteristics, impact tension and tensile properties of Al-Mg-Si T5 alloy and Al-Zn-Mg T6 alloy respectively welded with filler metal of Alcan 4043 were investigated. The dynamic fracture toughness values were obtained rapidly and simply for the specimen of small size by using instrumented Chirpy impact testing machine. the testing temperatures of the specimen were a range of room temperature and-196.deg. C. The results obtained in this experiment are summarized as follows. With decreasing the testing temperatures, dynamic tensile stress and fracture load were increased, on the other hand the deflection and impact value showed decreasing tendency in order of base metal>HAZ>weld. Changes of total absorbed energy were more influenced by the crack propagation energy than the crack initiation energy. At the low temperatures, the unstable rapid fracture representing the crack propagation appeared for the specimens of Charpy press side notched in Al-Zn-Mg alloy, but it was difficult to obtain the unstable rapid fracture in Al-Mg-Si alloy. Because of the development of plastic zone at the notch root, it was difficult to obtain thevalid $K_{1d}$ value in Al-Mg-Si alloy. Therefore the fatigue cracked specimens were effective in both Al-Mg-Si and Al-Zn-Mg alloys. With decreasing the impact testing temperatures, specimens underwent a transition from dimple-type transgranular fracture to lamella surface-type intergranular fracture because of the precipitate at the grain boundaries, impurities and crystal structure of the precipitates.s.

  • PDF

Al-Si 도금된 보론강 레이저 소스에 따른 레이저 용접부의 미세조직과 기계적 성질에 미치는 핫스탬핑 처리의 영향 (Effect of Hot-stamping on Microstructures and Tensile Properties of Al-Si Coated Boron Steel Welds with Laser Source)

  • 오명환;공종판;권민석;강정윤
    • Journal of Welding and Joining
    • /
    • 제31권6호
    • /
    • pp.96-106
    • /
    • 2013
  • In this study, the effect of laser source($CO_2$ and Nd:YAG) on the microstructure and tensile properties of laser welded Al-Si coated boron steel(1.2mmt) was investigated with before and after hot-stamping. In case of as welds condition, fracture occurred in base metal unrelated to the laser source. It could be explained that tensile strength of fusion zone composed of martensite and bainite is higher than that of base metal that contains a lot of ferrite despite dilution of Al and Si from coating layer to fusion zone. In case of hot-stamping condition, the fracture occurred in fusion zone irrelevant to laser source and the tensile strength was lower than hot stamped base metal. In the $CO_2$ laser welds, $Fe_3$(Al,Si) formed near the bond line was transformed into ferrite during hot-stamping. Therefore tensile strength of bond line is lower than that of base metal and center of fusion zone and the fracture occurred in the bond line. On the other hand, in the Nd:YAG laser welds, the higher concentration of Al formed the ferrite in the fusion zone during hot-stamping treatment. Also, the thickness of centerline was thinner than that of base metal. Therefore, it is considered that fracture occurred in centerline of fusion zone due to effect of concentration stress, and it leaded to a lower tensile strength and elongation.

단공 (端孔) V-노치가 있는 PMMA 판의 파괴기준에 관한 연구 (A Study on Fracture Criterion of PMMA Plates Having a V-Notch with an End Hole)

  • 추원철;조상봉;윤존도
    • 한국정밀공학회지
    • /
    • 제33권10호
    • /
    • pp.865-873
    • /
    • 2016
  • The aim of this study was to examine the validity of fracture criterion for PMMA plates that have a V-notch with an end hole. The predicted stress intensity factors and crack initiation angles by the fracture criterion based on the maximum circumferential stress and the novozhilov's criteria were compared with the experimental results. By increasing the radius of end hole, the differences of predicted stress intensity factors and experimental results increased, possibly due to the plastic zone size. The results indicated that when the radius of end hole is < 1 mm, the fracture criterion would be useful.

Damage progression study in fibre reinforced concrete using acoustic emission technique

  • Banjara, Nawal Kishor;Sasmal, Saptarshi;Srinivas, V.
    • Smart Structures and Systems
    • /
    • 제23권2호
    • /
    • pp.173-184
    • /
    • 2019
  • The main objective of this study is to evaluate the true fracture energy and monitor the damage progression in steel fibre reinforced concrete (SFRC) specimens using acoustic emission (AE) features. Four point bending test is carried out using pre-notched plain and fibre reinforced (0.5% and 1% volume fraction) - concrete under monotonic loading. AE sensors are affixed at different locations of the specimens and AE parameters such as rise time, AE energy, hits, counts, amplitude and duration etc. are obtained. Using the captured and processed AE event data, fracture process zone is identified and the true fracture energy is evaluated. The AE data is also employed for tracing the damage progression in plain and fibre reinforced concrete, using both parametric- and signal- based techniques. Hilbert - Huang transform (HHT) is used in signal based processing for evaluating instantaneous frequency of the acoustic events. It is found that the appropriately processed and carefully analyzed acoustic data is capable of providing vital information on progression of damage on different types of concrete.

매개변수 분석을 통한 단층파쇄대의 소단면 쉴드 TBM 터널 굴착 시 최적 보강영역 연구 (A study on the optimal reinforcement area for excavation of a small cross-section shield TBM tunnel in fault fracture zone through parameter analysis)

  • 강병윤;박형근;차재훈;김영진
    • 한국터널지하공간학회 논문집
    • /
    • 제22권3호
    • /
    • pp.261-275
    • /
    • 2020
  • 쉴드 TBM 공법을 사용해 단층파쇄대에 소단면 공동구 터널을 굴착 시 과다한 내공변위 및 붕락 발생 가능성이 높다. 단층파쇄대로 인한 트러블 및 공기증가로 인한 공사비 손실을 최소화하기 위해 적절한 지반보강이 요구된다. 본 연구에서는 단층파쇄대의 폭, 단층점토의 존재여부, 토피고 지하수위를 매개변수로 하여 MIDAS GTS NX (Ver. 280)을 이용한 수치해석을 통해 최적보강영역을 제시하고 주변지반 거동을 알아보았다. 그 결과 단층점토가 없는 경우 최대 0.5D 만큼 지반보강 적용 시 내공변위 및 지표침하 기준을 만족하였으며, 높은 투수계수로 인해 0.5D의 차수보강 적용이 필요하다고 판단된다. 단층점토가 존재할 때 내공변위 및 지표침하는 최소 0.5D에서 최대 터널 상부 단층파쇄대 전체에 지반보강 적용 시 안정성확보가 가능하였으며, 단층점토로 인해 지하수 유출량이 기준치 이내로 발생하여 차수보강이 불필요하였다.

이종마찰압접재의 접합계면 및 계면근방에서의 피로균열거동 (Behavior of Fatigue Crack at Interface and Around Interface for friction Welded Dissimilar Materials)

  • 오환섭
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.287-292
    • /
    • 1998
  • In this study behavior of fatigue crack and fatigue fracture is observed under rotary bending fatigue testing in friction welded dissimilar materials. Fatigue fracture most occurred in SM15C heat affected zone around Interface. In case of fatigue test, stress is reduced the position of fracture gradually moves to the welded Interface. Micro crack of heat affected zone surface on SM15C is observed at any different stress.

  • PDF

콘크리트의 변형률 국소화 및 진행성 파괴에 관한 연구 (Study on Strain Localization and Progressive Failure of Concrete)

  • 송하원;김형운;우승민
    • 콘크리트학회논문집
    • /
    • 제11권3호
    • /
    • pp.181-192
    • /
    • 1999
  • The progressive failure following strain localization in concrete can be analyzed effectively using finite element modeling of fracture process zone of concrete with a finite element embedded discontinuity. In this study, a finite element with embedded discontinuous line is utilized for the analysis of progressive failure in concrete. The finite element with embedded discontinuity is a kind of discrete crack element, but the difficulties in discrete crack approach such as remeshing or adding new nodes along with crack growth can be avoided. Using a discontinuous shape function for this element, the displacement discontinuity is embedded within an element and its constitutive equation is modeled from the modeling of fracture process zone. The element stiffness matrix is derived and its dual mapping technique for numerical integration is employed. Then, a finite element analysis program with employed algorithms is developed and failure analysis results using developed finite element program are verified through the comparison with experimental data and other analysis results.