• Journal of Acupuncture Research
• /
• v.19 no.6
• /
• pp.35-48
• /
• 2002

Objective : The study was performed to evaluate the effect of treatment for thoracolumbar compression fracture by using Bee Venom Acupuncture that is well known for anti-inflammatory and analgesic effect. Methods : We investigated 39 cases of patient with thoracolumbar compression fracture. The patients with thoracolumbar compression fracture were treated at the department of acupuncture & moxibustion of Kyung-Won University Oriental Hospital from 1st January 2001 to 30th August 2002. We selected for two groups. One group was treated by Bee Venom Acupuncture therapy(Bee Venom Acupuncture Group : BAG), the other group was treated by Filiform Acupuncture therapy(None Bee Venom Acupuncture Group : NBAG). Results : 1. The distribution showed female predominance in sex and 70's predominance in age. The largest group was "accidental fall" and the next was "lifting heavy objects" in causes, and within 2 weeks in the duration of disease 2. In the duration of admission, the largest group was within 4 weeks. In regard to level of injury, T12 was found to be most predominant, followed in turn by L1, L2, L5. In regard to grade of clinical symptoms, Grade III was most predominant, followed by Grade II, Grade IV. 3. In the results of treatment, 87.5% were above "Good" in BAG and 47.8% in NBAG. 4. In the result of treatment due to the grade of clinical symptoms, BAG was more excellent than NBAG on the whols grade. 5. In the result of treatment due to duration of admission, the duration of admission was not in proportion to the results of treatment. 6. In the change of lumber flexion, the improvement above $80^{\circ}$ was 50% in BAG and 21.7% in NBAG 7. In the stability of treatment, the BAG and NBAG did't show any detrimental change in GOT, GPT, r-GTP, BUN, creatinine. Conclusions : In the treatment of thoracolumbar compression fracture, the Bee Venom Acupuncture can be regarded as more effective treatment than Filiform Acupuncture in the clinical practice. This is expected to be available for clinical use.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.157-165
• /
• 1997

The strength level of welded joint in room temperature and elevated temperature up to $600^{\circ}C$ was investigated in 250 and 300 grade 18% Ni maraging steel sheet welded with electron beam. The results obtained in this study are as follows; 1. Optimum welding heat input was 600J/cm in 1.0mm thickness and the room temperature tensile strength, joint efficiency of welded joint treated with optimum aging condition were found to be about 166kg/$mm^2$, 95% in 250 grade, 189kg/$mm^2$, 92% in 300 grade maraging steel sheet, respectively. 2. Tensile strength of welded joint in room temperature increased slightly by aging after repeated solution heat treatment, but the fracture mode showed a shear. 3. Joint efficiency at a temperature between $540^{\circ}C$and $600^{\circ}C$ found to be about 72% to 55%, but the joint efficiency exceeded about 90% below $300^{\circ}C$. 4. The fracture occurred in most weld metal, and the fracture surface showed a shallow dimple.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.37-38
• /
• 2016

In this study, it evaluate the coarse aggregate mixed effect to impact resistance performance of the fiber reinforced cement-based material. The type of fiber is Hooked-ended steel fiber, and mixed 1vol.% in concrete and cement composites. The impact experiment was conducted by using a spherical shape projectile diameter of 25mm to 170m/s speed and Impact resistance performance was evaluated by measuring the fracture grade, fracture diameter and depth.

• Journal of Haehwa Medicine
• /
• v.16 no.1
• /
• pp.157-166
• /
• 2007

Objectives : The purpose of this study is to search for more effective methods of diagnosis and treatment of Fracture. Methods : Literature review on Fracture in view of oriental and western medicine. Conclusions : Fracture is classified by anatomical location, grade, shape of line, displacement and cause. The symptom of Fracture is pain, tenderness, deformity, attitude, abnormal mobility, crepitus, neurovascular injury. Fracture is not the same in Healing process by location. The age, endocrine system, chronic debilitating disease, stabilization is effect on healing period and process. Treatment of Fracture is classified emergency care, definite treatment and rehabilitation.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.626-632
• /
• 2010

Purpose: Nasal bone fractures are often classified as minor injury. However, the incidence of posttraumatic nasal deformity remains alarmingly high. It is because of unnoticed septal fracture. This study was conducted to determine the necessity of septoplasty for patients with nasal bone fracture accompanying grade I septal fractures. Methods: Among 105 patients with nasal bone fractures, 52 who had grade I septal fracture were diagnosed based on physical examination and computed tomography. Patients' age ranged from 14 to 65 years (mean 29.25 years), and 35 were male and 17 female. Patients were divided into 2 groups according to surgical treatment methods: patients who underwent closed reduction only (group 1, n=28) and those who underwent simultaneous closed reduction and septoplasty (group 2, n=24). The treatment outcomes were evaluated by comparing changes in nasal airway volume measured by acoustic rhinometry before the surgery, 3 months and 6 months after the surgery according to the timing of surgical repair and surgical treatment methods. Results: Nasal airway volume increased after the surgery by 17.8% in 3 months after the surgery, 25.2% in 6 months in group 1 and by 22.7% in 3 months, 35.8% in 6 months in group 2. The increase in airway volume after the surgery by 26.3% in 3 months after the surgery, 34.2% in 6 months after the surgery in operation within 1 week after trauma and by 12.1% in 3 months, 22.2% in 6 months after the operation later 1 week after trauma. The difference was statistically significant. Three patients in group 1 complained of intermittent nasal obstruction, two of whom showed a decrease in nasal airway volume by acoustic rhinometry. Conclusion: Most patients with nasal bone fractures accompanying grade I septal fractures have been treated with closed reduction in clinical settings. However, the results of this study suggest that septoplasty be performed after a correct diagnosis of septal fracture is made through comprehensive physical examination and computed tomography. Septoplasty is important to obtain more favorable outcomes and reduce complication.

• Computers and Concrete
• /
• v.4 no.3
• /
• pp.221-241
• /
• 2007

Based on the experiment results, the damage and fracture behavior of concrete at the ages of 1d, 2d, 7d and 28d, in three-point bending and uniaxial tensile tests, were simulated with a finite element program, ABAQUS. The critical stress intensity factor $K_{IC}^s$ and the critical crack tip opening displacement ($CTOD_C$) of concrete were calculated with effective-elastic crack approach for the three-point bending test of grade C30 concrete. Based on the crack band model, a bilinear strain-softening curve was derived to simulate the LOAD-CMOD curves and LOAD-Displacement curves. In numerical analysis of the uniaxial tension test of concrete of grade C40, the damage and fracture mechanics were combined. The smeared cracking model coupling with damaged variable was adopted to evaluate the onset and development of microcracking of uniaxial tensile specimen. The uniaxial tension test was simulated by invoking the damage plastic model which took both damage and plasticity as inner variables with user subroutines. All the numerical simulated results show good agreement with the experimental results.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.565-574
• /
• 2022

The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

• Transactions of Materials Processing
• /
• v.32 no.2
• /
• pp.87-91
• /
• 2023

In the present work, the ductile fracture behaviors of ultra-high strength steel sheets along the different loading directions are investigated under various loading paths. Three loading paths, i.e., in-plane shear, uniaxial tension, plane strain tension deformations, are considered, and the corresponding specimens are described. The experiments are conducted using the digital image correlation (DIC) system to analyze the strain at the onset of the fracture. The experimental results show that the loading path for each specimen sample is linear, and different values of the fracture strains for the loading direction from the plane strain tension are observed. The ductile fracture model of the modified Mohr-Coulomb (MMC) is constructed based on the experimental data and evaluated along the rolling direction and transverse direction under various loading paths.

• Journal of Acupuncture Research
• /
• v.18 no.2
• /
• pp.227-236
• /
• 2001

Objectives : This study was performed to evaluate the clinical results of the thoracolumbar fracture patients treated with oriental medical methods. Methods : We reviewed 40 patients of thoracolumbar fracture, who were hospitalized at WonKwang University KwangJu Oriental Medical Hospital and treated by oriental medical methods. We classified thoracolumbar fracture according to three column theory and then analyzed the cause of injury, sex-age distribution, treatment, and etc.. Results : 1. The distribution showed female predominance(72.5%) in sex and 70age-bracket predominance in age. 2. In the distribution of causes, the largest group was "lifting heavy objects"(40%) and the next was "slip down"(37.5%). 3. In the duration of symptoms, the largest group was the group of "acutest" (40%). 4. The distribution of injured level was L1 body the most(20%). 5. In classification of fracture, "compression fracture" was the most(57.5%) and the next was "burst fracture", "unstable fracture" in order. 7. Therapeutic effects above "fair" were 37 cases(92.5%). 8. The higher grade of clinical symptoms is, the lower therapeutic effect is. 9. In the distribution of treatment results according to classification of fracture, both the compression fracture and the burst fracture were almost same high and the unstable fracture is relatively lower than them. Conclusions : The result to treating thoracolumbar fracture by oriental medical methods is satisfactory.

• Transactions of Materials Processing
• /
• v.25 no.6
• /
• pp.402-408
• /
• 2016

A manufacturing technology of carbon fiber composites with thermoplastic polymer pellets and continuous woven fiber was investigated using a compression molding process. To secure the impregnation of resin into the porosity of fabric the composite specimens were prepared with general injection-molding grade polypropylene pellets and low viscosity polycarbonate pellets. Tensile tests of polypropylene and polycarbonate composites were performed. Polycarbonate composites showed higher fracture strength than that of polypropylene composites because of the difference of matrix properties. However, the increase rate of strength was lower than that of polypropylene composites due to the difference of coherence between matrix and reinforcement. To investigate the effect of carbon fiber volume fraction on the fracture strength variation polypropylene composites with different volume fraction were compression molded and tensile tests were performed together. It was shown that the fracture strength of the polypropylene composites increased by 3.2, 5.4 and 6.9 times with the increase of carbon fabric volume fraction of 0.256, 0.367, and 0.480, respectively.