• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.561-566
• /
• 2008

This is a retrospective clinical study on 2,955 patients who had visited the Emergency Room of Sang-gye Paik Hospital and then been treated in the Department of Oral and Maxillofacial Surgery during recent 4 years from Aug. 2002 to Dec. 2006. The obtained results were as follows. The total number of patients was 2,955 and the ratio of male to female was 1.72:1. The age distribution peak was the 1st decade (30.8%), followed by the 3rd decade (14.3%) and the 4th decade (14.0%). Trauma (62.3%) was the most frequent cause in dental emergency patients, pulpitis (13.0%) and infection patients were next in order of frequency. In trauma patients group, facial bone injury, tooth injury, soft tissue injury were included and soft tissue injury group was most prevalent, followed by tooth injury group and facial bone group. In total patient, the ratio of admission was 3.5%. We obtained the results of the distribution of primary emergency care in the traumatic injury, causal distribution of the jaw fracture, distribution of related medical department in multiple associated injuries, distribution of emergency care in infection, causal distribution and control methods of oral bleeding, distribution of TMJ disorder. The trauma patient group was major in the dental patients who had visited the emergency room, but other various groups were included. So we should analyze the pattern and the variation of the dental emergent patient to provide the proper treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.61-68
• /
• 2010

Purpose: This article attempted to determine the factors affecting the preload and screw loosening. Methods: Available clinical studies from 1981 to 2008 from the PUBMED that presented screw loosening data and review articles regarding screw joint stability were evaluated. Eleven studies dealing the biomechanical principles of the screw mechanics were reviewed. Moreover, the results of our data were included. Results: The frequency of screw loosening was consequently reduced due to the advancement in torque tightening with torque wrench, screw material, coating technique for reducing the frictional force, and thread design, etc. If preload in the screw falls below a critical level, joint stability may be compromised, and the screw joint may fail clinically. The types of fatigue failure of screw were divided to adhesive wear, plastic deformation, and screw fracture. Conclusion: An optimum preload is essential to the success of the implant-abutment complex. To maintain optimum preload, using a torque wrench and re-tightening at recall time were needed.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.512-518
• /
• 2001

It has been well known that 6.5wt% Si steel sheets have excellent magnetic properties such as low core loss. high maximum permeability and low magnetostriction. In this work, we studied a method for producing 6.5wt% Si steel sheets using a chemical vapor deposition (CVD) method. The following is the procedure adopted in this work to produce 6.5wt% Si steel sheets; SiCl$_4$ gas is applied onto a low content-Si steel sheet placed in a tube furnace. Silicon atoms resulted from the decomposition of SiCl$_4$ are permeated through the surface of the steel sheet. Finally, by the diffusion process maintaining it under a high temperature the silicon atoms diffuse uniformly into the sheet. Through this process, 6.5wt% Si steel sheets can be obtained. The manufactured Fe-6.5wt% Si steel sheet with a thickness of 0.5mm exhibited a high frequency core loss (W$_{2}$1k/) of 8.92 W/kg. Its permeability increased from 37,100 to 53,300 at 1 tesular(T). The mechanical properties of the manufactured steel sheets were also estimated and the result showed that the workability was significantly improved by annealing in vacuum at 773k. Increased plastic deformation was also observed prior to fracture and the amount of grain boundary rupture was reduced.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.149-157
• /
• 2014

The steam generator tubes of nuclear power plants have various types of corrosion failures during the plant operation. The stress corrosion cracking which occurs on the outer surface of tube is called the secondary side stress corrosion cracking and mainly occurs in the expansion-transition area of tube. The causes are the concentration of impurities by the sludge pile-up related to the geometry of its region and the residual stress by tube expansion in the process of steam generator manufacturing. Especially the directionality and sizes of residual stresses are differed according to the tube expansion methods and the direction and the frequency of tube cracks depend on their characteristics. In bases on the plant experiences, it is notified that circumferential cracks of tubes expanded with explosive expansion method are dominantly occurred compared to those of tubes done with hydraulic expansion one. Therefore in this study, according to tube expansion methods frequencies and sizes of tube cracks with specific direction are compared by means of accelerated immersion test and also the crack morphology and the specific chemicals from water-chemistry environment are observed through the fracture surface examination.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.502-508
• /
• 2012

Quantitative ultrasound technologies for osteoporosis diagnosis measure ultrasonic parameters such as speed of sound(SOS) and normalized broadband ultrasound attenuation(nBUA) in the calcaneus (heel bone). In the present study, the dependences of SOS and nBUA on bone mineral density in the proximal femur with high risk of fracture were investigated by using 20 trabecular bone samples extracted from bovine femurs. SOS and nBUA in the femoral trabecular bone samples were measured by using a transverse transmission method with one matched pair of ultrasonic transducers with a center frequency of 1.0 MHz. SOS and nBUA measured in the 20 trabecular bone samples exhibited high Pearson's correlation coefficients (r) of r = 0.83 and 0.72 with apparent bone density, respectively. The multiple regression analysis with SOS and nBUA as independent variables and apparent bone density as a dependent variable showed that the correlation coefficient r = 0.85 of the multiple linear regression model was higher than those of the simple linear regression model with either parameter SOS or nBUA as an independent variable. These high linear correlations between the ultrasonic parameters and the bone density suggest that the ultrasonic parameters measured in the femur can be useful for predicting the femoral bone mineral density.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.1
• /
• pp.55-66
• /
• 2019

Background: Postoperative nausea and vomiting (PONV) frequently occurs following bimaxillary orthognathic surgeries. Compared to opioids, Nefopam is associated with lower incidences of PONV, and does not induce gastrointestinal tract injury, coagulopathy, nephrotoxicity, or fracture healing dysfunction, which are common side effects of Nonsteroidal anti-inflammatory drugs. We compared nefopam- and fentanyl-induced incidence of PONV in patients with access to patient-controlled analgesia (PCA) following bimaxillary orthognathic surgeries. Methods: Patients undergoing bimaxillary orthognathic surgeries were randomly divided into nefopam and fentanyl groups. Nefopam 120 mg or fentanyl $700{\mu}g$ was mixed with normal saline to a final volume of 120 mL. Patients were given access to nefopam or fentanyl via PCA. Postoperative pain intensity and PONV were measured at 30 minutes and 1 hour after surgery in the recovery room and at 8, 24, 48, and 72 hours after surgery in the ward. The frequency of bolus delivery was compared at each time point. Results: Eighty-nine patients were enrolled in this study, with 48 in the nefopam (N) group and 41 in the fentanyl (F) group. PONV occurred in 13 patients (27.7%) in the N group and 7 patients (17.1%) in the F group at 8 hours post-surgery (P = 0.568), and there were no significant differences between the two groups at any of the time points. VAS scores were $4.4{\pm}2.0$ and $3.7{\pm}1.9$ in the N and F groups, respectively, at 8 hours after surgery (P = 0.122), and cumulative bolus delivery was $10.7{\pm}13.7$ and $8.6{\pm}8.5$, respectively (P = 0.408). There were no significant differences in pain or bolus delivery at any of the remaining time points. Conclusion: Patients who underwent bimaxillary orthognathic surgery and were given nefopam via PCA did not experience a lower rate of PONV compared to those that received fentanyl via PCA. Furthermore, nefopam and fentanyl did not provide significantly different postoperative pain control.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.60 no.8
• /
• pp.390-395
• /
• 2017

Background and Objectives With increasing frequency of car accidents, patients of dizziness caused by car accidents are also increasing. Various types of dizziness or vertigo can occur from car accidents depending on different injury mechanisms. Since accurate diagnosis is important for providing proper treatments, we evaluated clinical characteristics related to vestibular function of patients with dizziness caused car accidents. Subjects and Method In this retrospective case review study that runs from January 2011 to March 2013, a total of 82 patients with dizziness following car accident were enrolled consecutively. We analyzed the final diagnosis of dizziness according to different mechanisms of injury during car accident through clinical record review. Patients who developed dizziness within one month of car accident were included, excluding those who had temporal bone fracture and previous history of dizziness. Results Of the different types observed, 36.6% was head injury, 24.4% whiplash injury, 3.7% complex injury, 2.4% others and the rest was unknown. In the final diagnosis, the different types included 36.6% benign paroxysmal positional vertigo (BPPV), 23.2% unclassifiable dizziness, 18.3% cervical vertigo, 7.3% labyrinthine concussion, 3.7% BPPV with labyrinthine concussion and the rest was others. Of the different types of dizziness symptoms, 58.5% was headache, 45.1% was audiologic symptoms, and others included earfullness, tinnitus and hearing disturbance. Tinitogram and pure tone audiogram results show that 2.9% (27 people) of patients have tinnitus and 7.3% (6 people) have hearing disturbance. Conclusion An accurate diagnosis and timely management would be very important in forming a proper approach for post traumatic vertigo patients.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.215-226
• /
• 2021

To study the evolution mechanism of cracks in rocks with multiple defects, rock-like samples with multiple defects, such as strip-shaped through-going cracks and cavity groups, are used, and the crack propagation law and changes in AE (acoustic emission) and strain of cavity groups under different inclination angles are studied. According to the test results, an increase in the cavity group inclination angle can facilitate the initial damage degree of the rock and weaken the crack initiation stress; the initial crack initiation direction is approximately 90°, and the extension angle is approximately 75~90° from the strip-shaped through-going cracks; thus, the relationship between crack development and cavity group initiation strengthens. The specific performance is as follows: when the initiation angle is 30°, the cracks between the cavities in the cavity group develop relatively independently along the parallel direction of the external load; when the angle is 75°, the cracks between the cavities in the cavity group can interpenetrate, and slip can occur along the inclination of the cavity group under the action of the shear mechanism rupture. With the increase in the inclination angle of the cavity group, the AE energy fluctuation frequency at the peak stress increases, and the stress drop is obvious. The larger the cavity group inclination angle is, the more obvious the energy accumulation and the more severe the rock damage; when the cavity group angle is 30° or 75°, the peak strain of the local area below the strip-shaped through-going fracture plane is approximately three times that when the cavity group angle is 45° and 60°, indicating that cracks are easily generated in the local area monitored by the strain gauge at this angle, and the further development of the cracks weakens the strength of the rock, thereby increasing the probability of major engineering quality damage. The research results will have important reference value for hazard prevention in underground engineering projects through rock with natural and artificial defects, including tunnels and air-raid shelters.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.587-592
• /
• 2021

Change in the cortical thickness of long bones occurring with aging and osteoporosis is known to be a risk factor for fracture. The present study aims to investigate the dependencies of phase velocities of ultrasonic guided waves on the cortical thickness in 7 soft tissue-bone mimicking phantoms consisting of acrylic plates covered by a 2 mm-thick silicone rubber layer by using the axial transmission technique with a pair of transducers with a center frequency of 200 kHz and a diameter of 12.7 mm. Two distinct propagating waves with different velocities, the First Arriving Signal (FAS) and the Slow Guided Waved (SGW), were consistently observed for all the soft tissue-bone mimicking phantoms. The FAS velocity decreased slightly with increasing thickness, whereas the SGW velocity increased strongly with increasing thickness. The FAS and the SGW velocities were found to be closely consistent with the S0 and the A0 Lamb mode velocities for a free acrylic plate, respectively, suggesting that the presence of the soft tissue mimicking material (2 mm-thick silicone rubber layer) covering the acrylic plates does not influence significantly the velocity measurements.

• Journal of Nutrition and Health
• /
• v.41 no.2
• /
• pp.156-164
• /
• 2008

The purpose of this study was to investigate factors related to bone mineral contents (BMC) at os calcis of adolescents. The subjects were 604 students (327 boys and 277 girls) between 7th and 9th grade in Seoul, Korea. The mean age was 14.2 ${\pm}$ 0.9 years. General characteristics were collected by a questionnaire, bone mineral contents (BMC) were measured in os calcis by Duel Energy X-ray Absorptiometry (PIXI, General Electronics, USA) and height and weight were measured by bioelectrical impedance analysis method (Inbody 4.0, Biospace Co. Ltd, Seoul, Korea). Mean BMC of os calsis were 2.241 g. Height (p <.0001), weight (p <.0001I), BMC (p <.0001I) ofboys were higher than those of girls. Percent body fat of girls, however, was higher than that of boys (p <.0001). Anthropometric measurement, pocket money, sibling, experience of fracture, pubertal stage, intake of supplements, physical or outdoors activity, and eating habit had significant influence on BMC of boys. Anthropometric measurement, physical or outdoors activity, and eating habit had significant influence on BMC of girls. Multivariate regression with adjustment for sex and age showed that BMC was associated positively with height, BMI, frequency of regular activity, and intake of spinach or radish leaves (all p <0.05), and negatively with percent body fat (p <.0000 and Korean traditional diet pattern (p = 0.01). On the basis of these results, it is recommended to develop nutrition education and physical activity program for adolescents to improve BMC and prevent osteoporosis.