• Journal of Trauma and Injury
• /
• 제36권4호
• /
• pp.315-321
• /
• 2023

Pediatric carpal fractures are rare and often difficult to detect. This paper reviews the current literature on pediatric non-scaphoid carpal fractures, with a case report of a lunate fracture associated with a distal radius and ulnar styloid fracture, managed nonoperatively in a 12-year-old boy. There is lack of consensus regarding the management of these fractures due to the low number of reported cases. A frequent lack of long-term follow-up limits our understanding of the outcomes, but good outcomes have been reported for both nonoperative and operative management. This case report brings attention to the current time period for the definition of delayed union in pediatric carpal fractures, and emphasizes the need for prolonged follow-up for the detection of delayed complications leading to functional impairment.

• 대한족부족관절학회지
• /
• 제13권2호
• /
• pp.118-123
• /
• 2009

Purpose: We wanted to evaluate the relating factors for deformities of the foot after tibial fracture and the outcome of respective surgical treatment. Materials and Methods: We studied thirty-two patients (thirty-five feet) who had foot deformities after tibia fracture. The age, gender, shape, location, concurrent soft tissue injury and operative treatment of tibial fracture were analysed and outcome of the surgical treatment was investigated. Results: Deformities of the foot mostly occurred in open fractures of Gustilo type 3 or closed fracture with severe soft tissue injury. Variable surgical treatments such as simple release, lengthening, Z-plasty and osteotomy were performed. The AOFAS ankle-hind foot scale was improved from average of 37.3 points preoperatively to an average of 77.2 points at the last follow up. The Maryland foot score was from 42.9 to 90.2 and AOFAS Lesser Toe Metatarso-phalangeal interphalangeal scale was from 42.9 to 90.5. Radiological correction was also improved from 21.9 degrees to 7.9 degrees (Meary angle), from 112.2 to 138.5 (Hibb's angle) and from 33.8 to 25.9 (Calcaneal pitch). Conclusion: We proposed that great care should be taken of treatment for the tibial fracture and early detection and proper management of the foot deformities are crucial.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.68-73
• /
• 2022

In this study, we produced the surface defect detection model to automatically detect defect bone plates using a deep learning algorithm. Bone plates with a width and a length of 50 mm are most used for fracture treatment. Normal bone plates and defective bone plates were printed on the 3d printer. Normal bone plates and defective bone plates were photographed with 1,080 pixels using the webcam. The total quantity of collected images was 500. 300 images were used to learn the defect detection model. 200 images were used to test the defect detection model. The mAP(Mean Average Precision) method was used to evaluate the performance of the surface defect detection model. As the result of confirming the performance of the surface defect detection model, the detection accuracy was 96.3 %.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.27-37
• /
• 1993

본 연구에서는 공구의 파손 및 마멸량을 검출할 수 있는 시스템을 구축하고자 하였다. CCD(charge coupled device)카메라를 통해 공구형상의 영상을 얻고 이를 PC 로 분석하는 영상처리 기법과, 여기서 계산된 정보를 이용하여 패턴인식 기법으로 공 구의 상태를 판정하는 알고리즘을 개발하였다.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.326-333
• /
• 2010

In this study, DAQ and TRA modules were applied to the CFRP single specimen testing method using AE. A method for crack identification in CFRP specimens based on k-mean clustering and wavelet transform analysis are presented. Mode I on DCB under vertical loading and mode II on 3-points ENF testing under share loading have been carried out, thereafter k-mean method for clustering AE data and wavelet transition method per amplitude have been applied to investigate characteristics of interfacial fracture in CFRP composite. It was found that the fracture mechanism of Carbon/Epoxy Composite to estimate of different type of fractures such as matrix(epoxy resin) cracking, delamination and fiber breakage same as AE amplitude distribution using a AE frequency analysis. In conclusion, the presented results provide a foundation for using wavelet analysis as efficient crack detection tool. The advantage of using wavelet analysis is that local features in a displacement response signal can be identified with a desired resolution, provided that the response signal to be analyzed picks up the perturbations caused by the presence of the crack.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.63-70
• /
• 2002

In tunnel construction, the information on the rock quality and the location of fault or fracture are crucial for economical design of support pattern and for safe construction of the tunnel. The grade of rock is commonly estimated through the observation with the naked eye of recovered cores in drilling or from physical parameters obtained by their laboratory test. Since drilling cost is quite expensive and terrains of planned sites for tunnel construction are rough in many cases, however, only limited information could be provided by core drilling Electrical resistivity and EM surveys may be a clue to get over this difficulty. Thus we have investigated electrical resistivity and EM field data providing regional Information of the rock Quality and delineating fault and fracture over a rough terrain. In this paper, we present some case histories using electrical resistivity and EM survey for the site investigation of tunnel construction. Through electrical resistivity and EM survey, the range and depth of coal seam was clearly estimated, cavities were detected in limestone area, and weak zones such as joint, fault and fracture have been delineated.

• Journal of Korean Biological Nursing Science
• /
• 제21권1호
• /
• pp.54-61
• /
• 2019

Purpose: This study aimed to identify the incidence and risks for pressure ulcer among older patients with hip fracture. Methods: The subject were 215 older patients suffering from hip fracture who were admitted for surgical operation from January 1, 2012 to April 30, 2016 in a university-affiliated hospital. The incidence of pressure ulcer was collected retrospectively through medical record review and the risk factors were analyzed using Cox's proportional hazard model. Results: Out of the total, 32 patients (14.9%) developed pressure ulcer with the average occurrence period being 4.72 (${\pm}3.81$) days. Stage II pressure ulcer was the most common at 72.0%. Risk factors included ambulation status before injury (p= .039), spinal anesthesia (p= .029), and stay at intensive care unit after operation (p= .009). Conclusion: Despite pressure ulcer prevention efforts, the incidence remained relatively high. Considering the identified risk factors, more efforts is needed for early detection and prevention of pressure ulcers in such patients.

• Geomechanics and Engineering
• /
• 제24권1호
• /
• pp.1-14
• /
• 2021

In this study, a new approach using electrical resistivity measurement was proposed to detect grout penetration and to evaluate the grouting performance for such as waterproof efficiency in single rock fracture. For this purpose, an electrical resistivity monitoring system was designed to collect multi-channel data in real time. This was applied to a system for grout injection/penetration using a transparent fracture replica with various aperture sizes and water-cement mix ratio. The electrical resistivity was measured under various grout penetration conditions in real time, which results were directly compared to the visual observation images of grout penetration/distribution. Moreover, the grouting success status after the curing process was evaluated by measuring the electrical resistivity in relation to changes in frequency in fracture cells where grout injection and penetration were completed. Consequently, it was determined that the electrical resistivity monitoring system could be applied effectively to the detection of successful penetration of grouting into a target area and to actual field evaluation of the grouting performance and long-term stability of underground rock structures.

• Structural Monitoring and Maintenance
• /
• 제2권4호
• /
• pp.383-397
• /
• 2015

This article identifies and addresses current limitations on the use of numerical models for validation and/or calibration of damage detection methodologies that are based on the analysis of the high frequency response of the structure to identify the occurrence of abrupt anomalies. Distributed-plasticity non-linear fiber-based models in combination with experimental data from a full-scale reinforced concrete column test are used to point out current modeling techniques limitations. It was found that the numerical model was capable of reproducing the global and local response of the structure at a wide range of inelastic demands, including the occurrences of rebar ruptures. However, when abrupt sudden damage occurs, like rebar fracture, a high frequency pulse is detected in the accelerations recorded in the structure that the numerical model is incapable of reproducing. Since the occurrence of such pulse is fundamental on the detection of damage, it is proposed to add this effect to the simulated response before it is used for validation purposes.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.79-85
• /
• 2010

In this paper, we propose a web inspection system (WIS) for real-time detection of paper defects which can cause critical fractures during papermaking process. Our system incorporates high speed line-scan camera, lighting system, and detection algorithm to provide robust and precise detection of paper defects in real-time. Since edge defects are very crucial to the paper fractures, our system focuses on the edge region of the paper instead of inspecting the whole paper area. In our algorithm, image projection and sub-pixel operation are utilized to detect the edge defects precisely and connected component labeling and shape analysis techniques are adopted to extract various kinds of the region defects. Experimental results revealed that our web inspection system is very efficient for detecting paper defects during papermaking processes.