• 자원환경지질
• /
• 제52권1호
• /
• pp.81-90
• /
• 2019

본 연구는 이차원 DFN(discrete fracture network) 시스템에서 절리의 빈도 및 길이분포에 따른 절리텐서의 성분 및 일차불변량이 DFN의 블록수리전도 특성에 미치는 영향을 평가하였다. 확정적인 두 방향의 절리군을 사용하여 절리군의 빈도와 길이분포에 따라 생성된 총 36개의 DFN 시스템에서 각각 매 $30^{\circ}$ 간격으로 설정된 수두경사에 따른 블록수리전도도와 절리텐서의 성분 간의 상관성 분석이 수행되었다. DFN 블록의 블록수리전도도는 이에 직교하는 방향의 절리텐서 성분과 강한 상관관계를 갖는다. 본 연구의 연결성을 유지한 DFN 시스템은 절리텐서의 일차불변량이 2.0~2.5 이상일 때 등가의 연속체 해석이 가능한 것으로 평가되었다. 절리텐서의 일차불변량은 평균 블록수리전도도와 매우 강한 함수관계를 갖으며 DFN 시스템의 블록수리전도 특성을 평가하는 데에 사용될 수 있다. 또한, 본 연구를 통하여 절리텐서의 일차불변량을 이용한 DFN 시스템의 업스케일링 가능성이 논의되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.828-833
• /
• 2003

In this paper, a study on fracture characteristics of chemically prestressed mortar with addition of expansive additives was carried out. Uni-axial tension tests with reinforced mortar specimen restrained by embedded reinforcing bar and three point bending tests with notched steel fiber reinforced beams were carried out to verify the characteristics of the cracking behavior, the tension stiffening effect due to bond between rebar and mortar, and fracture characteristic. Tension stiffening curve for the chemically prestressed mortar was obtained from uni-axial tension test. And increased fracture energy due to the chemical prestress was also obtained from bending test and tension softening curve for chemically prestressed mortar was also obtained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.395-401
• /
• 2000

Rubber is used extensively in many industries because of its large reversible elastic deformation, excellent damping and energy absorption characteristics, and wide availability. Therefore it becomes very important to evaluate fracture characteristics of rubber. Tearing energy and J-integral have been used as fracture parameters of rubber. The J-integral values for pure shear and single edge specimen are calculated by finite element analysis and compare with theoretical values. Finite element analysis is performed by ABAQUS.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.153-158
• /
• 2000

Nuclear reactor pressure vessel should be safety even in the case that hypothetical defects with allowable size are in vessel. Therefore, the materials should have excellent fracture resistance characteristics. The purpose of this study is to analyze the results of preirradiation baseline test of nuclear pressure vessel for Yonggwang Unit 5/6. In experiments, drop weight tests and impact tests are carried out to obtain nil-ductility transition reference temperature, $RT_{NDT}$ and static and dynamic fracture toughness tests are performed to compare with $K_{IR}$ curve in accordance with ASME Sec.III. The test results show that the materials had sufficiently fracture resistance characteristics for 40 years of design life.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.268-271
• /
• 2001

When compared to other composite materials such as FRP and MMC, hybrid composite material is more attractive one due to the high specific strength and the resistance to fatigue. However, the fracture mechanism of hybrid composite material is extremely complicated because of the bonding structure of metals and FRP. Recently, nondestructive technique has been used to evaluate the fracture mechanism of these composite materials. In this study, AE technique has been used to clarify the fracture mechanism and the degree of damage for Al 7075/CFRP hybrid composite material. It was found that AE event, energy and amplitude among AE parameters were effective to evaluate fracture process of Al 7075/CFRP composite material. In addition, the relationship between the AE signal and the characteristics of failure surface using optical microscope was discussed.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1147-1154
• /
• 1999

The objective of this paper is to evaluate the fracture resistance characteristics of SA508 CL.1a carbon steel, and their associated welds manufactured for primary coolant piping system of nuclear power plants. The effect of various parameters such as pipe size, welding method and chemical composition on the material properties were discussed. Test results showed that the offset of pipe size on tincture toughness was negligible, while the effect of welding method on fracture toughness was significant. In addition, Fracture toughness for carbon steel was influenced by silicon contents due to the different steel refining processes.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.451-458
• /
• 2005

The effects of fiber orientation on acoustic emission(AE) characteristics have been studied for various composite laminates. Reflection and transmission optical microscopy were used to investigate the damage zone of specimens. AE signals were classified through short time Fourier transform(STFT) as different types: AE signals with a high intensity and high frequency band were due to fiber fracture, while weak AE signals with a low frequency band were due to matrix cracking and/or interfacial cracking. Characteristic feature in the rate of hit-events having high amplitudes showed a procedure of fiber breakages, which expressed the characteristic fracture processes of notched fiber-reinforced plastics with different fiber orientations. As a consequence, the behavior of fracture in the continuous composite laminates could be monitored through nondestructive evaluation(NDE) using the AE technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.132-137
• /
• 2001

Miniaturized specimen technology is useful to characterize the mechanical behavior using a minimum volume of material, because it is almost impossible to sample the conventional specimen for the fracture toughness test without damage to equipment. Test material was 1Cr-1Mo-0.25V steel which was widely used for turbine rotor material. Two kinds of miniaturized impact specimens were prepared, i.e., miniaturized specimen with side groove and without side groove. The correlation between ductile brittle transition temperature(DBTT) of full size impact specimen and that of miniaturized impact specimen was made. The characteristics of miniaturized impact specimens technique as well as fracture stress were discussed. Finally, we concluded that the characteristics of fracture stress change on aging time were similar to that of DBTT.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.20-23
• /
• 2005

The service demands of railway vehicles have become severe in recent years due to a general increase in operating speeds. It is very important to evaluate the fracture mechanics characteristics with respect to high-speed train wheel. In the present study, fracture mechanics characterization tests were carried out in accordance with various wheel materials. The result shows that fracture mechanics characteristic should be considered in the design code of the wheel materials.

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.551-557
• /
• 2014

Ideally, it is preferable to obtain the fracture characteristics of a piping from the fracture toughness of real pipes. However, a fracture toughness test on real pipes not only incurs much expense, but is very difficult to perform. Therefore fracture toughness tests have been carried out with standard specimens instead of real pipes. But, the estimates of fracture toughness obtained from standard specimens are more conservative than those of real pipes owing to the difference in the constraint effect between real pipes and standard specimens. Therefore, we have been studied with equivalent stress gradient specimen (ESG) which is designed to behave equally compared to real pipe about stress gradient on crack tip. In this study, we will evaluate fracture characteristics of equivalent stress gradient specimen by using analytical methods and compare with those of real pipe. And finally investigate suitability of equivalent stress gradient specimen.