• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권2호
• /
• pp.113-124
• /
• 2014

항공기를 개발하는데 있어 형상 결정과 요구도 입증은 주로 비행시험 결과에 의존한다. 비행시험은 많은 시간과 비용을 요구하므로 비행시험 계획을 체계적으로 수립하고 분석함으로써 비용절감과 일정단축에 기여할 수 있다. 본 논문에서는 한국형 기동헬기에 적용된 진동 비행시험 사례를 적용하여 비행시험 계획을 체계적으로 수립하고 분석할 수 있는 방안을 제시하였다. 본 논문에서는 주요 부위에서 측정한 진동수준 값을 가지고 종합적인 진동수준 만족도를 하나의 수치로 나타내기 위하여 호감도 함수를 채택하고 진동수준의 측정을 위한 비행시험을 체계적으로 수행하기 위하여 실험계획법의 하나인 부분요인배치법을 사용하였다. 또한 비행시험을 단계적으로 수행하여 비행시험 횟수를 더욱 줄일 수 있는 방법을 제시하였다.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.521-527
• /
• 2010

This article presents a method to calculate the sound radiation of transmission gearbox housing by using Helmholtz integral. Rayleigh integral is used to verify the method. Half-space radiation is considered because the actual gearbox housing is on hard place like concrete. For optimization, orthogonal array is used as a fractional factorial design method. Sound Radiation is calculated with simple source like plate and sphere shape, then actual gearbox BEM model is applied to the method.

• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.685-691
• /
• 2015

In this work, to identify effective parameter for performance of piezoelectric jetting dispenser, experimental investigation is carried out based on design of experiment. After preparing jetting dispenser using two stack-type piezoelectric actuators, basic working principle of the jetting dispenser is described. Eight operating conditions are chose as main factors and it is assumed that each factor has two levels. To reduce number of experiments for performance evaluation, the experimental sets are designed based on factional factorial design method. Experimental setup is established and the weight of single dot is measured by using precision scale. The main and interaction effects of factors are analyzed using commercial statistical program and optimal operating condition for small amount and small variation of weight of dispensed single dot are determined.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2666-2671
• /
• 2007

This work presents microchannel heat sink shape optimization procedure using Kriging method. Design variables relating to microchannel width, depth and fin width are selected, and thermal resistance has been taken as objective function. Design points are selected through a three-level fractional factorial design of sampling method. Navier-Stokes and energy equations for laminar flow and conjugate heat transfer are solved at these design points using a finite volume solver. Solutions are carefully validated with experimental results. Using the numerically evaluated objective function, a surrogate model (Kriging) is constructed and optimum point is searched by sequential quadratic programming. The process of shape optimization greatly improves the thermal performance of microchannel heat sink under constant pumping power.

• 대한기계학회논문집B
• /
• 제31권9호
• /
• pp.733-740
• /
• 2007

Microchannel heat sink shape optimization is performed using Kriging method. Design variables relating to microchannel width, depth and fin width are selected, and thermal resistance has been taken as objective function. Design points are selected through a three-level fractional factorial design of sampling method. Navier-Stokes and energy equations for laminar flow and conjugate heat transfer are solved at these design points using a finite volume solver. Solutions are carefully validated with experimental results. Using the numerically evaluated objective function, a surrogate model (Kriging) is constructed and optimum point is searched by sequential quadratic programming. The process of shape optimization greatly improves the thermal performance of microchannel heat sink under constant pumping power.

• 분석과학
• /
• 제20권5호
• /
• pp.370-382
• /
• 2007

본 연구에서는 GC/FID를 이용한 SPME법을 적용하여 액상에서 대표적 디젤첨가제인 EGBE, DGBE, DBM, TGME의 미량 분석 가능성을 조사하였다. 또한, 요인배치설계법을 적용하여 EGBE, DGBE, DBM, TGME 미량분석의 최적조건을 도출하였다. 실험은 통계분석결과 뿐만 아니라 요인 수의 최적화에 따른 중심합성설계에 의한 완전요인 설계법을 사용하였으며, 반응표면분석은 추출 효율이 주 영향인염 농도, 흡착 온도, 흡착 시간과 sonication 시간에 따른 2차 다항식에 의해 설명될 수 있음을 보여주었다. 본 연구에서의 결과는 요인배치설계법을 사용하여 액상 시료에서 EGBE, DGBE, DBM, TGME의 정량분석을 개선하는 새로운 자료분석법을 보여주었다.

• Journal of Microbiology and Biotechnology
• /
• 제23권3호
• /
• pp.364-374
• /
• 2013

Monacolin K and yellow pigment, produced by Monascus sp., have each been proven to be beneficial compounds as antihypercholesterolemic and anti-inflammation agents, respectively. However, citrinin, a human toxic substance, was also synthesized in this fungus. In this research, solidstate fermentation of M. purpureus TISTR 3541 was optimized by statistical methodology to obtain a high production of monacolin K and yellow pigment along with a low level of citrinin. Fractional factorial design was applied in this study to identify the significant factors. Among the 13 variables, five parameters (i.e., glycerol, methionine, sodium nitrate, cultivation time, and temperature) influencing monacolin K, yellow pigment, and citrinin production were identified. A central composite design was further employed to investigate the optimum level of these five factors. The maximum production of monacolin K and yellow pigment of 5,900 mg/kg and 1,700 units/g, respectively, and the minimum citrinin concentration of 0.26 mg/kg were achieved in the medium containing 2% glycerol, 0.14% methionine, and 0.01% sodium nitrate at $25^{\circ}C$ for 16 days of cultivation. The yields of monacolin K and yellow pigment were about 3 and 1.5 times higher than the basal medium, respectively, whereas citrinin was dramatically reduced by 36 times.

• Journal of Ginseng Research
• /
• 제24권2호
• /
• pp.58-63
• /
• 2000

식물조직배양기술을 이용하여 인삼 root를 생산하고자, 식물생장조절물질로 유도된 인삼 root를 사용하여 최적액체배양조건을 RSM을 이용하여 조사하였다. 최적액체배양조건을 배지의 pH, sucrose 농도, nitrogen 농도, phosphate 농도의 3 level-4factor의 fractional factorial design에 의하여 조사한 결과, 인삼 root의 생장율은 최저 1.00g에서 최고 2.33g까지 나타났다. 다중회기분석으로 구한 model식을 가지고 등고분석과 3차원분석을 수행한 후 독립변수의 최저 또는 최고수준에서 조속변수가 최대치를 나타내지 않는 배지의 pH와 sucrose농도의 변수에 대하여 model식을 편미분한 결과 인삼 root의 최적액체배양조건은 pH5.6, sucrose 3.8%, nitrogen 50mg/L, phosphate 80.7mg/L로 예측되었다. 이렇게 결정된최적조건값들을 model식에 대입하여 얻은 예상치는 2.36g 이었다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2509-2517
• /
• 1993

Lapping is a very complicated and random process resulting from the variation of abrasive grains in its sizes and shapes and from the numerous factors having an effect on the process quality. Thus it needs to be analyzed by experimental method rather than by theoretical method to obtain the relative effects of factors quantitatively. In this study, cylindrical lapping experiment designed by Taguchi's L8 orthogonal array was performed and analyzed by Yates' ANOVA table. As a result, effective factors and interaction effects were identified and discussed. Also the optimal factor combination to obtain the largest improvement of surface roughness was selected and confirmatory experiments were peformed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1226-1231
• /
• 2009

This paper presents operating characteristics of internal heat exchanger(IHX) for $CO_2$ geothermal heat pump in the heating mode. Mass flow rate of $CO_2$, inlet temperatures of $CO_2$ at high and low pressure side were selected as main effect factors by using fractional factorial DOE(Design of Experiments). And RSM(Response Surface Method) was used in optimization phase. The results show that heat transfer rate of IHX increases when either inlet temperature of low pressure side decreases or inlet temperature of high pressure side increases. Effectiveness of IHX increases with increasing of inlet temperature of either high pressure side or low pressure side. Finally, performance contour map was provided over the operation ranges of the main design factors.