• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.313-318
• /
• 1999

Many products related to automobile and airplane industry have been manufactured by semi-solid forging. In this paper finite element analysis of product by combined extrusion in semi-solid state was performed and its experimental verification using A356 was conducted. distribution of solid fraction was analyzed and compared with the experimental microstructure in the product. In addition, distribution of temperature in the product was analysed by finite element method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1155-1163
• /
• 2004

Extracellular signal-regulated kinase (ERK) signaling pathway is one of the mitogen-activated protein kinase (MAPK) signal transduction pathways. This pathway is known as pivotal in many signaling networks that govern proliferation, differentiation and cell survival. The ERK signaling pathway comprises positive and negative feedback loops, depending on whether the terminal kinase stimulates or inhibits the activation of the initial level. In this paper, we attempt to model the ERK pathway by considering both of the positive and negative feedback mechanisms based on Michaelis-Menten kinetics. In addition, we propose a fraction ratio model based on the mass action law. We first develop a mathematical model of the ERK pathway with fraction ratios. Secondly, we analyze the dynamical properties of the fraction ratio model based on simulation studies. Furthermore, we propose a concept of an inhibitor, catalyst, and substrate (ICS) controller which regulates the inhibitor, catalyst, and substrate concentrations of the ERK signal transduction pathway. The ICS controller can be designed through dynamical analysis of the ERK signaling transduction pathway within limited concentration ranges.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.2
• /
• pp.36-43
• /
• 1991

Acoustic backscattering from a buble column in water was studied theoretically and experimentally. For theoretical analysis a general scattering theory was used by assuming the bubble column to be lumped element scatterer which can be characterized by its shape, void fraction and dimensions. When the void fraction is less than 1% and the incident frequency is higher than individual bubble resonance frequencies, the experimental results show that the acoustic backscattering from a bubble column depends mainly on the void fraction rather than the individual bubble sizes. It was also theoretically and experimentally observed that the acoustic backscattering levels were increased and their peaks moved to the lower frequency regin by raising the void fraction of bubble column.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2404-2412
• /
• 1994

A mathematical model has been developed for predicting kinematic, thermal, and solidification histories of atomized droplets during flight. Liquid droplet convective cooling, recalescence, equilibrium-state solidification, and solid-phase cooling were taken into account in the analysis of the solidification process. The spherical shell model was adopted where the heterogeneous nucleation is initiated from the whole surface of a droplet. The growth rate of the solid-liquid interface was determined from the theory of crystal growth kinetics with undercooling caused by the rapid solidification. The solid fraction after recalescence was obtained by using the integral method. The thermal responses of atomized droplets to gas velocity, particle size variation, and degree of undercooling were investigated through the parametric studies. It is possible to evaluate the solid fraction of the droplet according to flight distance and time in terms of a dimensionless parameter derived from the overall energy balance of the system. It is also found that the solid fraction at the end of recalescence is not dependent on the droplet size and nozzle exit velocity but on the degree of subcooling.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1120-1125
• /
• 2016

The neutron decay constant, ${\alpha}$, and effective delayed neutron fraction, ${\beta}_{eff}$, are important parameters for the control of the dynamic behavior of nuclear reactors. For the heavy water zero power reactor (HWZPR), this document describes the measurements of the neutron decay constant by noise analysis methods, including variance to mean (VTM) ratio and endogenous pulse source (EPS) methods. The measured ${\alpha}$ is successively used to determine the experimental value of the effective delayed neutron fraction as well. According to the experimental results, ${\beta}_{eff}$ of the HWZPR reactor under study is equal to 7.84e-3. This value is finally used to validate the calculation of the effective delayed neutron fraction by the Monte Carlo methods that are discussed in the document. Using the Monte Carlo N-Particle (MCNP)-4C code, a ${\beta}_{eff}$ value of 7.58e-3 was obtained for the reactor under study. Thus, the relative difference between the ${\beta}_{eff}$ values determined experimentally and by Monte Carlo methods was estimated to be < 4%.

• The Korean Journal of Ecology
• /
• v.21 no.1
• /
• pp.35-45
• /
• 1998

This study was carried out for the identification and bioassay of bioactive compounds which isolated from Phyutolacca americana L. obtained results are summarized as follows: 1. Two biological active compounds were found from crude extracts of P. americana roots, using the systematic solvent fractionations, such as ethyl acetate fraction and butanol fraction. One biological compound was isolated from the ethyl acetate fraction with silicagel column chromatography, which was identified as a ${\alpha}-spinasterol$ by spectral analysis of IR, H-NMR, C-NMR and MS. The other one is isolated from butanol fraction which was identified as phytolaccoside E by spectral analysis of IR, H-NMR, C-NMR and MS. 2. The ${\alpha}-spinasterol$ and phytolaccoside E induced necrosis of primary root and resulted in death of the tested plant. These two compounds strongly inhibited to the growth of Mucor racemous and Phytophthora infestants but did not inhibited the growth of Colletotricum lagenarium and Fusarium oxisporum. 3. Cytotoxicity of the two biological active compound was exammined to the two different animal cancer cell lines (L1210, K562). The phytolaccoside E has some cytotoxical activity to the growth of cancer cell lines (L1210, K562) but $\alpha$-spinasterol has not cytotoxical effect.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.40.1-40.1
• /
• 2014

We have classified barred galaxies for 418 RC3 sample galaxies within z < 0.01 from SDSS DR7 using the visual inspection, ellipse fitting method and Fourier analysis. We found the bar fraction to be ~60%, 43% and 70% for each method and that the ellipse fitting method tends to miss the bar when a large bulge hides the transition from bar to disk in early spirals. We also confirmed that the Fourier analysis cannot distinguish between a bar and spiral arm structure. These systematic difficulties may have produced the long-time controversy about bar fraction dependence on Hubble sequence, mass and color. We designed a new method to fine bars by analyzing the ratio map of bar strength in polar coordinates, which yields the bar fraction of ~27% and ~32% for SAB and SB, respectively. The consistency with visual inspection reaches around 70%, and roughly 90% of visual strong bar are classified as SAB and SB in our classification. Although our method also has a weakness that a large bulge lowers the value of bar strength, the missing bar fraction in early spirals is reduced to the level of ~1/4 compared to the ellipse fitting method. Our method can make up for the demerits of the previous automatic classifications and provide a quantitative bar classification that agrees with visual classification.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.293-298
• /
• 2000

${\beta}$-Glucan a kind of polysaccharide which is particularly abundant in Agaricus blazei is known as the bioactive materials especially anticancer agents. The process development of the isolation and the purification process of water soluble ${\beta}$-glucans from A. blazei was achieved. and the process operation variables were optimized. Crude polysaccharides (CR.PS) were obtained from A. blazei by hot water extraction filtration solvent precipitation dialysis and freeze drying. Neutral and acidic fraction of polysaccharides were separated from crude polysaccharides by ion chromatography and then high molecular weight and low molecular weight fraction were separated from neutral fraction by gel chromatography. Quantitative and qualitative analysis of each compounds were performed with FT-IR NMR spectroscopy. Based on these analysis the optimal conditions of temperatures operating time organic solvent volume for precipitation and dialysis time were determined.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1347-1354
• /
• 1994

This paper deals with the experimental research, including measurement and analysis and field survey, on the causes of occurring noise defective gear boxes in hoist production plant in order to reduce the fraction of their occurrence. In this reserch following investigations are performed : measurement and gear-boxes, examination of each machining process of production, measurement and analysis of dimensional accuracy of each part, comparative vibration test with exchanging inaccurate parts. From these investigations, it is found that the machining accuracy of pinion gear tooth thickness is the most sensitive factor of noise problem. By maintaining the tooth thickness error within 0.05 mm tolerance in the gear cutting process, the fraction of noise defective gear-boxes are greatly reduced to less than 2%, where the usual rate of it has been 20-50%.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.53-60
• /
• 2001

Surface roughness plays a significant role in friction, wear, and lubrication in machine components. Most engineering surfaces have the nongaussian height distribution. So, in this study, contact simulations are conducted for not only gaussian surfaces but also nongaussian surfaces. Nongaussian rough surface considering the kurtosis is generated numerically And the effects of kurtosis on real contact area fraction, average gap, and mean asperity contact pressure are studied. It will be shown that the real contact area fraction and the mean asperity contact pressure are sensitive to the characteristics of surface geometry according to kurtosis.