• KIEAE Journal
• /
• 제16권1호
• /
• pp.89-94
• /
• 2016

This study is part of three-dimensional(3D) heat transfer analysis program developmental process. The program is being developed without it's own built in 3D-modeller. So 3D-model must be created from another 3D-modeller such as generic CAD programs and imported to the developed program. After that, according to the 3D-geometric data form imported model, 3D-mesh created for numerical calculation. But the 3D-model created from another 3D-modeller is likely to have errors in it's geometric data such as mismatch of position between vertexes or surfaces. these errors make it difficult to create 3D-mesh for calculation. These errors are must be detected and cured in the pre-process before creating 3D-mesh. So, in this study four kinds of filters and functions are developed and tested. Firstly, 'vertex error filter' is developed for detecting and curing for position data errors between vertexes. Secondly, 'normal vector error filter' is developed for errors of surface's normal vector in 3D-model. Thirdly, 'intersection filter' is developed for extracting and creating intersection surface between adjacent objects. fourthly, 'polygon-line filter' is developed for indicating outlines of object in 3D-model. the developed filters and functions were tested on several shapes of 3D-models. and confirmed applicability. these developed filters and functions will be applied to the developed program and tested and modified continuously for less errors and more accuracy.

• 농촌계획
• /
• 제9권4호
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• Architectural research
• /
• 제16권2호
• /
• pp.45-56
• /
• 2014

The objective of this article, positively recognizing existing researches, is to revisit some aspects regarding the Vāstupuruṣamaṇḍala with a square grid work which is a fundamental planning guideline to control the construction of a Hindu temple and a mathematical doctrine to lead ritual programs. Hence, this paper suggests some reservations as to certain details such as temple constructions. In order to lay hold on its meaning, this paper touches upon the specific matters about the Vāstupuruṣamaṇḍala in the building construction of Hindu temples, which set out to shed light on four concerns; first, it explores the formation process of the Vāstupuruṣamaṇḍala in concert with the evolution of Hindu temples over time; second, it considers differences and similarities in comparison with other texts intimately articulated with the construction of temples, and then understands the relationship between their local languages and applications to the Vāstupuruṣamaṇḍala; third, it examines the symbolic and sanctified process of the temple's construction on the Vāstupuruṣamaṇḍala grids with two- or three-dimensional computer graphics (by means of the Auto Cad and Rhino tools), invisibly situating the divinities within it and illuminating the roles of ornamentation in the structural terms of temples; fourth, it presents that there are another rules on the building construction based upon architect-priest's craftsmanship skilled as a stonemason or a carpenter in the manual processes of the temples' construction for proper measurements and truncations of stone and wood closely linked together structural stability of completed temples. In conclusion, proceeding from what has been said above, this thesis shows that the Vāstupuruṣamaṇḍala grid includes both practical and spiritual meanings to construct a Hindu temple.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.599-602
• /
• 2002

A novel rapid prototyping (RP) process, an automated transfer type variable lamination manufacturing process (Automated VLM-ST) has been developed. In Automated VLM-ST, a vacuum chuck and linear moving system transfer the plate type material with two pilot holes to the rotation stage. A four-axis synchronized hotwire cutter cuts the material twice to generate Automated Unit Shape Layer (AUSL) with the desired width, side slopes, length, and two reference shapes in accordance with CAD data. Each AUSL is stacked on the stacking plate with two pilot pins using the pilot holes in AUSL and the pilot pins. Subsequently, adhesive is supplied to the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously applied to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly fabricated. This paper describes the procedure for generating the cutting path data (AUSL data) f3r automated VLM-ST. The method for the generation of the Automated Unit Shape Layer (AUSL) in Automated VLM-ST was practically applied and fabricated for a various shapes.

• 한국의류학회지
• /
• 제24권2호
• /
• pp.214-225
• /
• 2000

The objective of this study was to investigate images of Korean traditional patterns. The subjects consisted of 369 male and 356 female undergraduate students. The experimental materials used in this study were 48 stimuli and questionnaires, composed of 7-point semantic differential scales of 23 bipolar adjectives. Twelve motifs selected from 3 groups of Korean patterns were used as motif stimuli. Twelve repeated patterns were constructed from them to be applied on a CAD-simulated dress. The data was analyzed by factor analysis, ANOVA, Duncan's multiple range test. The major findings were as follows: 1. Four dimensions were emerged accounting for the dimensional structure of the images of Korean traditional patterns. These dimensions were 'simplicity', 'quality', 'interest', and 'modernity' dimension. Among them, 'simplicity' and 'quality' were the major dimensions. 2. Category, interpretation type, composition type, and application object of motif had significant effects on the images of above-mentioned dimensions. The application object had a significant effect on 'simplicity' and 'modernity' image, and the composition type on 'quality' and 'interest' image.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.140-148
• /
• 2004

A novel rapid prototyping (RP) process, a full-automated transfer type variable lamination manufacturing process (Full-automated VLM-ST) has been developed. In the full-automated VLM-ST process, a vacuum chuck and a rectilinear motion system transfer the EPS foam material in the form of the plate with two pilot holes to the rotary supporting stage. The supplied material is then cut into an automated unit shape layer (AUSL) with a desired width, a desired length, a desired slope on the side surface, and a pair of reference shapes, which is called the guide shape (GS)’, including two pilot holes in accordance with CAD data through cutting in two steps using a four-axis synchronized hotwire cutter. Then, each AUSL is stacked by setting each AUSL with two pilot holes in the building plate with two pilot pins, and subsequently, adhesive is applied onto the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously given to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly and automatically fabricated. This paper describes the method to generate guide shapes in AUSL data for the full-automated VLM-ST process. In order to examine the applicability of the method to generate guide shapes, three-dimensional shapes, such as a piston shape and a human head shape, are fabricated from the full-automated VLM-ST apparatus.

• Hip & pelvis
• /
• 제36권2호
• /
• pp.129-134
• /
• 2024

Purpose: Preoperative planning has become essential in performance of total hip arthroplasty (THA). However, data regarding the effect of the planner's experience on the accuracy of digital preoperative planning is limited. The objective of this study was to assess the accuracy of digital templating in THA based on the surgeon's experience. Materials and Methods: A retrospective study was conducted. An analysis of 98 anteroposterior pelvic radiographs, which were individually templated by four surgeons (two hip surgeons and two orthopaedic residents) using TraumaCad^® digital planning, was performed. A comparison of preoperatively planned sizes with implanted sizes was performed to evaluate the accuracy of predicting component size. The results of preoperative planning performed by hip surgeons and orthopaedic residents were compared for testing of the planner's experience. Results: Femoral stem was precisely predicted in 32.4% of cases, acetabular component in 40.3%, and femoral offset in 76.7%. Prediction of cup size showed greater accuracy than femoral size among all observers. No differences in any variable were observed among the four groups (acetabular cup P=0.07, femoral stem P=0.82, femoral offset P=0.06). All measurements showed good reliability (intraclass correlation coefficient [ICC] acetabular cup: 0.76, ICC femoral stem: 0.79). Conclusion: The results of this study might suggest that even though a surgeon's experience supports improved precision during the planning stage, it should not be restricted only to surgeons with a high level of experience. We consider preoperative planning an essential part of the surgery, which should be included in training for orthopaedics residents.

• 패션비즈니스
• /
• 제13권1호
• /
• pp.102-114
• /
• 2009

Chitosan is a polysaccharide with cationic amino groups in its structure and has useful properties as functional materials. Various end-use developments of chitosan are in progress. When the cotton fabric is pretreated with chitosan, the hand property of cotton fabric may be improved expecially for the summer apparel. In this study, as a cross-linking agent to introduce chitosan into cotton, BTCA(butane-1,2,3,4-tetracarboxylic acid) or CA(citric acid) was added in order to prevent detachment of chitosan by the cross-linking. During the cross-linking procedure, via the padding-drying-heat setting, amino groups of chitosan and hydroxyl groups of cotton, carboxyl groups of BTCA/CA are cross-linked by forming anhydrous cyclic rings. Since BTCA has four carboxyl groups, cross-linking by thermal treatment is easy, leading to the trials in wrinkle-recovery treatment of cotton fabrics. However, the high price of the BTCA reagent has been a shortcoming in the actual application for industrial use. Therefore, in this study, we tried the application of CA having three carboxyl groups, which is relatively low priced, as the substituting cross-linking agent. The hand of the treated fabrics were evaluated by measuring physical properties. In addition, based on the physical properties, three-dimensional images were introduced by using 3D CAD systems and results were compared.

• 한국의류학회지
• /
• 제26권3_4호
• /
• pp.402-411
• /
• 2002

미국대학생이 인지하는 한국전통문양의 감성이미지와 그 구조를 살펴보았으며, 그 결과를 종합하면 다음과 같다. 첫째, 한국전통문양의 종류, 표현유형, 구성형식, 적용대상에 따른 감성이미지는 고급성, 단순성, 쾌할성, 현대성의 네 가지 차원으로 구성되어 있으며, 고급성과 단순성 차원이 주요 차원인 것으로 나타났다. 둘째, 한국전통문양에 대한 감성이미지는 독립변인인 문양의 종류, 표현유형, 구성형식, 적용대상에 따라 유의한 차이가 있었으며, 고급성 차원의 이미지에는 문양의 표현유형이, 쾌활성 차원의 이미지에는 문양의 구성형식이, 현대성 차원의 이미지에는 문양의 적용대상이 중요한 영향을 미쳤다.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.137-143
• /
• 1993

The tetranuclear heterometallic complex CpMo$Os_3(CO)_{10}({\mu]-H)2[{\mu}3-{\eta}^2-C(O)CH_2Tol]\;(1,\;Cp={\eta}^5-C_5H_5,\;Tol=p-C_6H_4Me)$ has been examined by variable-temperature $^{13}$C-NMR spectroscopy and by a full three-dimensional X-ray structual analysis. Complex 1 crystallizes in the orthorhombic space group Pna2$_1$ with a = 12.960(1) ${\AA}$, b = 11.255(l) ${\AA}$, c = 38.569(10)${\AA}$, V = 5626(2) ${\AA}^3$ and ${\rho}$(calcd) = 2.71 gcm$^{-3}$ for Z = 8 and molecular weight 1146.9. Diffraction data were collectedon a CAD4 diffractometer, and the structure was refined to $R_F$ = 9.7% and $R_{W^F}$ = 9.9% for 2530 data (MoK${\alpha}$ radiation). There are two essentially equivalent molecules in the crystallographic asymmetric unit. The tetranuclear molecule contains a triangulated rhomboidal arrangement of metal atoms with Os(2) and Mo at the two bridgehead positions. The metal framework is planar; the dihedral angle between Os(l)-Os(2)-Mo and Os(3)-Os(2)-Mo planes is 180$^{\circ}$. A triply bridging (${\mu}_3,\;{\eta}^2$) acyl ligand lies above the Os(l)-Os(2)-Mo plane; the oxygen atom spans the two bridgehead positions, while the carbon atom spans one bridgehead position and an acute apical position. The molecular architecture is completed by an ${\eta}^5$-cyclopentadienyl ligand and a semi-triply bridging carbonyl ligand on the molybdenum atom, and nine terminal carbonyl ligands-four on Os(3), three on Os(l), and two on Os(2). The two hydride ligands are inferred to occupy the Os(l)-Os(2) and Mo-Os(3) edges from structural and NMR data.