• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.43-54
• /
• 2016

In the present paper, development of the three-dimensional (3D) computational code based on Galerkin finite element method (GFEM) for solving the multigroup forward/adjoint diffusion equation in both rectangular and hexagonal geometries is reported. Linear approximation of shape functions in the GFEM with unstructured tetrahedron elements is used in the calculation. Both criticality and fixed source calculations may be performed using the developed GFEM-3D computational code. An acceptable level of accuracy at a low computational cost is the main advantage of applying the unstructured tetrahedron elements. The unstructured tetrahedron elements generated with Gambit software are used in the GFEM-3D computational code through a developed interface. The forward/adjoint multiplication factor, forward/adjoint flux distribution, and power distribution in the reactor core are calculated using the power iteration method. Criticality calculations are benchmarked against the valid solution of the neutron diffusion equation for International Atomic Energy Agency (IAEA)-3D and Water-Water Energetic Reactor (VVER)-1000 reactor cores. In addition, validation of the calculations against the $P_1$ approximation of the transport theory is investigated in relation to the liquid metal fast breeder reactor benchmark problem. The neutron fixed source calculations are benchmarked through a comparison with the results obtained from similar computational codes. Finally, an analysis of the sensitivity of calculations to the number of elements is performed.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.519-525
• /
• 2012

Enhancement of light trapping in solar cells is becoming increasingly urgent for the development of next generation thin film solar cells. One of the possible candidates for increasing light trapping in thin film solar cells that has emerged recently is the use of scattering from metallic nanostructures. In this study, we have investigated the effects of the geometric parameters of Ag nanorings on the light scattering efficiency by using three dimensional Finite Different Time Domain (FDTD) calculations. We have found that the forward scattering of incident radiation from Ag nanorings strongly depends on the geometric parameters of the nanostructures such as diameter, height, etc. The forward scattering to substrate direction is increased as the outer diameter and height of the nanorings decrease. In particular, for nanorings larger than 200 nm, the inner diameter of Ag nanorings should be optimized to enhance the forward scattering efficiency. Light absorption and scattering efficiency calculations for the various nanoring arrays revealed that the periodicity of nanorings arrays also plays an important role in the absorption and the scattering efficiency enhancement. Light scattering efficiency calculations for nanoring arrays also revealed that enhancement of scattering efficiency could be utilized to enhance the light absorption through the forward scattering mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.121.1-121
• /
• 2002

Calculation unit and peripheral units that are used to make the position controller are embedded to one chip FPGA. $\textbullet$ Feed-forward PID controller and interpolator in the calculation unit mitigate frequent context switching. $\textbullet$ The peripheral units reduce the size of the joints position control board. $\textbullet$ Because the calculation unit is designed with pipeline structure, it has the advantages to apply to the multi joints.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.57-67
• /
• 2011

Purpose of this study is to find the mitigation method of magnetic field by finite length multi-conductors such as indoor distribution lines and to be applicable to design of the distribution lines. For this purpose, exact formula about the components $B_x$, $B_y$, $B_z$ of magnetic field need in case of straight line-conductor with finite length forward any direction. In this study simple formula of the components were deduced and by using these formula magnetic fields for various models of line-configurations were calculated. And also a calculation method of induced currents in conductive shield was presented and using this method, programing of calculation is relatively easy and calculation time is short. The magnetic field after cancellation by these induced currents was calculated. All of calculations were performed by Matlab 7.0 programs. Through the calculation results it could be obtained followings for the mitigation of magnetic fields. The separation between conductors ought to be smaller than smaller as possible. In case of 3-phase, delta configuration is more effective than flat configuration. In case of 3-phase, unbalanced currents ought to be reduced as possible.. In case of more than two circuits of 3-phase, adequate locations of each phase-conductor such as rotating configuration of 3-phase conductors are more effective. The magnetic shielding effect of the conductive shielding sheet is very high.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.2
• /
• pp.127-137
• /
• 2014

Self-sufficiency rate of food in South Korea is almost at the lowest level among OECD countries, and the decrease tend of farmland is expected to be continued. In this situation, the government has been revised the target self-sufficiency rate of food, and carried forward various policies in order to achieve it. One of those policies is the restoration business of idle farmland which is planned to carry forward after 2015. This study set up indicators evaluating effective use of idle farmland, and tried to apply in the field before carrying forward restoration business. The result of this study may be summarized as follows. First of all, it reset an evaluation indicator that was based on the evaluation indicator developed in order to set application directions of idle farmland. Next, it selected 30 idle farmlands with reset evaluation indicator among 11,635 which were inspected nationwide in 2012. Before applying indicator, it measured the condition of recycling such as accessibility of farmland, condition of irrigation and drainage system, land state, and surroundings by field investigation. Then, it calculated composite score in each target area through applying indicators, and verified the indicator by comparing calculated result with the one which was decided from field investigation. Finally, it carried out field investigation, correct and upgrade some problems of the standard of score calculation that was found during applying previously set evaluation indicator to target area, and established the final standard of calculation for evaluation indicator.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.295-300
• /
• 2012

Various forward collision warning algorithms have studied in order to protect a car accident. For this, in general, algorithms using an external device such as a camera and sensor generate a forward collision warning. However, if using the external device, it can occur errors due to device characteristics when there is rain or fog. Also, the prevention of a chain-reaction collision is insufficient because the system generates a warning in case of only vehicle having a forward collision danger. If it combines the vehicle safety communications, the method becomes a solution to protect a chain-reaction collision. So, In this paper, we proposes a improved forward collision warning algorithm using the wireless communication technique, driver's information, breaking distance, and velocity. And we compare and analyze our algorithm and previous algorithms.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.37-43
• /
• 2014

In this paper, we present the effect of forward current gain on emitter area in NPN transistors are used widely in the almost linear integrated circuits and integrated injection logic. Relations between forward current gain and emitter area were conformed with the simulation with examined calculation and experiments. At the same emitter length, as junction depth is increased, common emitter current gain is decreased. Ratio of Emitter bottom area comparing to side area increases, the emitter current gain is increased. The theory and simulation results were fitted in with the experimental data very well.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.104-111
• /
• 2009

An unstructured overset mesh method has been developed for the simulation of unsteady flow fields around isolated rotors and rotor-fuselage configurations. The flow solver was parallelized for the efficient calculation of complicated flows requiring a large number of cells. A quasi-unsteady mesh adaptation technique was adopted to enhance the spatial accuracy of the solution and to better resolve the rotor wake. The method has been applied to calculate the flow fields around rotor-alone and rotor-fuselage configurations in forward flight. Validations were made by comparing the predicted results with those of measurements. It was demonstrated that the present method is efficient and robust for the prediction of unsteady time-accurate flow fields involving multiple bodies in relative motion.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.147-149
• /
• 2000

This paper describes a power flow method for distribution systems, applying the method of symmetrical component to back/forward sweep method. The proposed algorithm is effective for unbalanced radial distribution system, with process of distributed resource(PQ & PV node), AVR(Auto Voltage Regulator), shunt capacitor. This proposed method compared conventional back/forward sweep method with the using three phase unbalanced distribution systems with 34 nodes.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.401-403
• /
• 2001

This paper describes a power flow method for distribution systems, applying the method of symmetrical component to back/forward sweep method. The proposed algorithm is effective for unbalanced radial distribution system, with process of AVR(Auto Voltage Regulator), shunt capacitor. The proposed method was compared with the conventional Back/forward sweep method by using three phase unbalanced distribution systems of 123 nodes.