• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.47-59
• /
• 2009

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting latency may vary depending on the type of applications, thus requiring application-specific algorithm and protocol design paradigms which help us to maximize energy conservation and thus the network lifetime. In this paper, we propose a novel delay-adaptive sensor scheduling scheme for energy-saving data gathering which is based on a two phase clustering (TPC). The ultimate goal is to extend the network lifetime by providing sensors with high adaptability to the application-dependent and time-varying delay requirements. The TPC requests sensors to construct two types of links: direct and relay links. The direct links are used for control and forwarding time critical sensed data. On the other hand, the relay links are used only for data forwarding based on the user delay constraints, thus allowing the sensors to opportunistically use the most energy-saving links and forming a multi-hop path. Simulation results demonstrate that cluster-based delay-adaptive data gathering strategy (CD-DGS) saves a significant amount of energy for dense sensor networks by adapting to the user delay constraints.

• Clean Technology
• /
• v.29 no.2
• /
• pp.79-86
• /
• 2023

The homogeneous catalyst, Ru-MACHO-BH, selectively performs hydrogenation reactions only on the carbonyl group of α, β-unsaturated aldehyde compounds with extremely high reactivity and selectivity. However, the hydrogenation of α, β-unsaturated aldehydes involves a heterogeneous Diels-Alder reaction, resulting in the formation of significant amounts of byproducts, such as dimers. In this study, we used the Ru-MACHO-BH catalyst (Carbonyl hydrido (tetrahydroborato) [bis (2-diphenyl phosphino ethyl) amino] ruthenium(II)) to selectively hydrogenate the carbonyl group of a specific type of α, β-unsaturated aldehyde called methacryl aldehyde, leading to the synthesis of methallyl alcohol. Simultaneously, we applied diols to inhibit the formation of byproducts. The results demonstrate that monoethylene glycol can significantly reduce the formation of diols. Based on these results, we effectively suppressed the formation of dimers containing vinyl groups in methacryl aldehyde by using hydroquinone, which can efficiently inhibit the chemical interaction of vinyl groups. Consequently, the conversion rate of methacryl aldehyde was increased. Ultimately, by reducing the amount of the expensive homogeneous catalyst Ru-MACHO-BH to 1/10, we achieved a selectivity of over 90% and a yield of over 80% for the desired product, methallyl alcohol. These results provide a method to minimize yield reduction while reducing the usage of expensive catalysts, thereby improving cost-effectiveness. We expect that the reaction could be applied to various kinds of selective hydrogenation and has been successfully run on an industrial scale.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.95-106
• /
• 2023

Quartz (SiO₂) is among the major rock-forming minerals in the earth's crust. The atomistic structures of SiO₂ may evolve during diverse frictional processes. The reduction of friction of quartz-rock accompanied by its amorphization, hydration, and formation of silica gel provides mineralogical insights into earthquakes and related phenomena. Ball milling, together with rotary shear experiments have been useful to infer the atomic origins of such processes. In this study, optimal experimental conditions for ball milling for amorphization of SiO₂ were determined by taking into account various process variables. The crystallinity of SiO₂ gradually decreased and became amorphous as the ball milling time increased at a high milling speed. The degree of wear of the milling media and its effect on the amorphization of SiO₂ were analyzed using distinct milling materials (zirconia, stainless steel). The amount of ball wear increased with increasing milling time. Furthermore, the worn stainless steel particles from balls tend to interact with amorphized SiO₂ to form Si-O-Cr. These results aid in understanding the process of atomistic structural changes caused by ball milling of divserse materials with relatively high hardness, such as SiO₂, and understanding various geological friction processes.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.198-205
• /
• 2023

We investigated the effects of Al and Mg on the microstructure and hardness of the coating layer of galvanized steel sheets, by thermodynamic calculations, X-ray diffraction, scanning electron microscopy, and Vickers hardness tests of Zn-0.2Al, Zn-6Al-2Mg, and Zn-10Al-5Mg coating layers. Regardless of the alloy composition of the galvanizing bath, a Fe-Al layer was observed between the coating layer and steel sheet. The Zn-0.2Al coating layer consists of major h.c.p. Zn phase and minor f.c.c. Al phase. The fraction of f.c.c. Al phase (containing a significant amount of Zn) of the coating layer increases with increasing the chemical composition of Al of the galvanizing bath. The h.c.p. MgZn₂ phase was formed in the Al/Mg-containing Zn-6Al-2Mg and Zn-10Al-5Mg coating layers, forming Zn-Al-MgZn₂ eutectic microstructure. The primary MgZn₂ phase was additionally formed in the Zn-10Al-5Mg coating layers containing high concentrations of Al and Mg. The Vickers hardness values of Zn-0.2Al, Zn-6Al-2Mg, and Zn-10Al-5Mg coating layers were 59.1 ± 1.2 HV, 161.2 ± 5.7 HV, and 215.5 ± 40.3 HV, respectively. The addition of Al and Mg increased the hardness of the coating layer by increasing the fraction of the Al phase (containing Zn) and MgZn₂ intermetallic compound, which were harder than the Zn phase.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.6
• /
• pp.75-87
• /
• 2023

This study presents an experimental design for demonstrating the role of nature-based solutions to climate change in the landscape and garden sector. The study suggests spatial strategies for a carbon-neutral society and its role as a cultural industry. This paper describes the use of a low-maintenance garden as part of a strategy for carbon reduction with the goal of protecting the environment and forming a carbon-neutral society. To this end, this study involved the design and construction of a realistic model garden to provide scientific data on the functions, spatial elements, and carbon neutrality of carbon-reducing gardens. The target site is located in the Sejong National Arboretum. The test area in which the carbon-reducing function is measured is located in the centre of the site, and other spaces include dry gardens, community gardens, and flower gardens intended for exhibition and relaxation. The experimental area is divided into several smaller areas within which the carbon-reducing effect is analysed according to the amount of biochar installed, the planting density, and the plant species present. The application of facilities and construction methods to promote carbon reduction were based on the method known as '10 types of carbon gardening for the earth'. In the model garden, we employed rainwater utilization facilities and used low-carbon certified wood and local materials. The carbon reduction effect of each facility and construction method is compared and presented here. The results are expected to serve as an important basis for realizing a carbon-neutral society and can be used as a reference in various fields that require sustainable development, such as the garden industry.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.494-500
• /
• 2003

The effects of $Al_2$O$_3$ addition upon the sintering range of clay-EAF dust (the specified wastes produced from steel making process) system body which would be used as a constructing bricks were investigated. The slope of apparent density to sintering temperature decreased for Clay-dust body containing 5~15 wt% A1203 sintered at 1200-125$0^{\circ}C$, and the absorption(%) of specimen sintered above 125$0^{\circ}C$ decreased due to the formation of open pores produced by pore bloating. For the specimen without any $Al_2$O$_3$ addition sintered at 1275$^{\circ}C$, the major phase was cristobalite, the small amount of mullite (3Al$_2$O$_3$ 2SiO$_2$) formed and the hematite (Fe$_2$O$_3$) remained. In the Clay-dust system body containing $Al_2$O$_3$ 15 wt%, however, the cristobalite disappeared and the major phase was mullite. Also the part of $Al_2$O$_3$ reacted with hematite to form hercynite (FeAl$_2$O$_4$). From the these results, addition of $Al_2$O$_3$ to Clay-dust system body enlarges a sintering range; decreasing an apparent density and absorption slop to sintering temperature owing to consumption of liquid phase SiO$_2$ at higher temperature and gas-forming component Fe$_2$O$_3$ at reduced atmosphere which would decrease an amount of liquid formed and increase the viscosity of the liquid produced during the sintering process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.2
• /
• pp.167-175
• /
• 1971

A pot experiment with an acid sulfate soil from Kimhae was carried out to find out the cause of toxicity in rice plant. The effect of liming on changes in pH, Eh, Al, and $Fe^{2+}$ in soil and leachate was examined at two-week interval during the growth of rice. Also, total $P_2O_5$, $SiO_2$, Fe and Al contents in plants at harvesting stage were determined. In the early stage, the rice plant in the check soil showed the same healthy growth as did in limed soil even at high Al in soil and leachate. Around panicle forming stage, reddish brown mottlings suddenly infested all over the plants when accompanied with strong reduction, and afterward growth was severely retarded, and finally caused the significant difference in yield. During the strong reduction, significant amount of sulfide was formed only in check soils, but no free $H_2S$ was detected. Appreciable Al was still present in soil and leachate, and $Fe^{2+}$ in check soil was lower than that in limed soil, but $Fe^{2+}$ in leachate was slightly higher. Limed soils were more reduced and produced more $Fe^{2+}$ due to increased microorganism activity in the neutral pH. In the leachate, the check showed slightly higher $Fe^{2+}$ concentration but considerably higher than limed one at later stage. Appreciable amount of Al was detected only in check soil and leachate from transplanting to panicle formation stage. Plant tissues at harvesting stage contained very low P regardless of liming. Uptake of Si was markedly increased by liming. Contents of Fe an Al was markedly higher in check than limed one, but difference in Fe content was more drastic possibly due to more Fe uptake in presence of markedly higher $Fe^{2+}$ in soil and leachate at later growing stage. In conclusion toxic symptom in this acid sulfate soil seems to be primarily due to Al when accompanied with low pH and strong reduction. But association with $Fe^{2+}$ toxicity is not completely excluded. In order to differentiate the effect of $Fe^{2+}$ from that of Al more detailed plant analysis at different stage is required.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1097-1106
• /
• 1998

Biodegradable edible films were prepared from rice protein concentrates (RPC) made from rice wine meal by alkaline extraction and isoelectric precipitation. The effect of film forming solution pH and plasticizers were studied, and cross-linkers were added to improve mechanical properties and water vapor permeabilities (WVP) of films. Films could be formed within pH $8{\sim}11$ with tensile strength (TS) of 4.3{\sim}5.7\;MPa$. Films produced under pH 11 had the highest TS (5.7 MPa) and the lowest WVP $(0.44\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa)$. Added glycerol, polyethylene glycol 200 (PEG) and its mixture (GLY:PEG=50:50) as plasticizers also affected the mechanical properties and WVP of films. TS and elongation at break (E) of films at various plasticizer levels were $5.5{\sim}1.0\;MPa$ and $3.6{\sim}24.3%$, respectively. At the same plasticizer concentration, the highest TS was observed when glycerol was used whereas the highest E was measured when mixture was used as plasticizer. WVPs of films with thickness of $60\;{\mu}m$ were $0.39{\sim}0.54\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$. WVP of films decreased as the ratio of glycerol/PEG 200 was decreased, and WVP increased as the total amount of plasticizer added to the films increased. Film strength was improved by the addition of small amount of sodium hydrogen sulfate, succinic anhydride, ascorbic acid and citric acid, whereas TS of films containing $0.5{\sim}2.0%$ of NaCl and $CaCl_2$ were lower than those without the salts. The highest TS (6.3 MPa) was achieved with films containing 0.1% of succinic anhydride.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.19-29
• /
• 1976

The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.

• Health Policy and Management
• /
• v.10 no.3
• /
• pp.19-49
• /
• 2000

This study was conducted to help staff members of health centers manage personnel by examining the staff members' recognition level of organization structure of health centers, their motivation, their job satisfaction level and its related factors. Data were collected from 471 staff members of 14 health centers from March 3, 1999 to April 30, 1999. The results of this study are summarized as follows. In recognition levels of organization structure of health centers, the recognition level of necessity of discretion right was highest(3.55 points on the base of 5 points), while the recognition level of the location of decision making right was lowest(2.77 points). The general recognition of organization structure of health centers was 3.06 points, the suitability of division of duties was 3.05 points, and the optimum of manpower and budget was 2.93 points. The staff members' general recognition level of the organization structure appeared significantly higher in case of the groups of small and medium sized cities, above fifties, below high school graduate, above the sixth grade, public service experience of above 20 years, service period of below 2 years at present post, and average monthly salary of one million, eight hundred and ten thousand won. In the recognition level of the location of decision making right, the groups of big cities, male, the married, above the sixth grade, health and administration posts, average monthly salary of one million, three hundred and ten thousand won to one million, and eight hundred thousand won were significantly higher than the other groups. The recognition level of necessity of discretion right was higher in case of the groups of the twenties, the unmarried, above college graduate, nursing post, public service experience of below 5 years, service period of below 2 years at present post, and average monthly salary of below eight hundred thousand won. In the recognition level of suitability of division of duties, the groups of small and medium sized cities, the married, medical technicians, public service experience of above 20 years, and service period of below 4 years at present post were significantly higher than the other groups. In the staff members' recognition levels of organization management, the recognition level of opinion response when making decision was highest(2.92 points). The recognition level of rationality of the target amount establishment method was 2.88 points and the recognition level of personnel management was 2.63 points. The recognition level of personnel management was significantly higher in case of the groups of small and medium sized cities, the forties, above the sixth grade, medical technicians, public service experience of above 20 years, service period of below 2 years at present post, and average monthly salary of above one million, eight hundred and ten thousand won. In the recognition level of opinion response when making decision, the groups of small and medium sized cities, female, the eighth grade, health and administration posts, and service period of below 2 years at present post were higher than the other groups. The recognition level of rationality of the target amount establishment method was significantly higher in case of the groups of above fifties, below high school graduate, above the sixth grade, medical service post, and public service experience of 15 to 20 years. The factors significantly influencing sanitation were sex, education level, the period of public service experience, general recognition of organization structure, recognition of necessity of discretion right, recognition of suitability of division of duties, and recognition of opinion response when making decision. The factors which significantly influenced motivation were marital status, grade, recognition of the location of decision making right, recognition of necessity of discretion right, recognition of division of duties, recognition of opinion response when making decision, and sanitation. Sex, education level, recognition of suitability of division of duties, recognition of the target amount establishment method, and motivation influenced job satisfaction significantly. The factors significantly influencing organization culture were age, the period of public service experience, service period at present post, recognition of optimum of manpower and budget, recognition of suitability of division of duties, recognition of opinion response when making decision, and recognition of rationality of the target amount establishment method. In the coming days, the staff members' job satisfaction level must be increased through motivation and efficient conduct of duty must be accomplished through rational organization structure and management. Moreover, change of the staff members' consciousness and administrative system which are suitable for local autonomy system have to be established with increase of local residents' consciousness level and education level. Forming organization culture by reformative idea which fits the new era, public health service by the Community Health Act and health education service by the Health Promotion Act must be carried out efficiently. In doing so, financial support of central government and active efforts and concerns of local governments have to be devoted in order to get public health service in which peculiarity of the community is considered to be pursued well.