• Journal of Korea Foundry Society
• /
• v.32 no.6
• /
• pp.261-268
• /
• 2012

The effects of thickness, base element and additive to inoculant on the number of eutectic cells and chill depth of thin-section gray cast iron were investigated. Meanwhile the number of eutectic cells increased by inoculation, chill depth decreased. The former decreased and the latter increased by holding the melt at the temperature range between 1,450 and $1,500^{\circ}C$. The former was more for the thinner casting with the thickness of 5 mm than the other. The result of thermal analysis coincided well with the change of macrostructure. The former increased and the latter decreased with the increased contents of carbon, silicon and the silicon content by inoculation. The former decreased and the latter increased with increased manganese content. The number of eutectic cells decreased as the amounts of rare earth and the bismuth added to this inoculant increased. With the addition of sulfur of 0.10 wt% of the weight of this inoculant, the maximum number of eutectic cells was obtained.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.19-30
• /
• 2019

The former administration office building of Kyeong-seong-bu(京城府) was a building converted from the Japanese residency-general's of Kyeong-seong(京城理事廳) which was originally built as the Japanese consulate in Joseon(日本領事館). It was too worn and too small as a Kyeong-seong-bu administration office even with several annexes. Kyeong-seong-bu tried to build a new big administration office building at the vacant north side of the same site, which was closely faced to the rotary in front of the Bank of Joseon(朝鮮銀行前廣場). But this trial was ended in vain due to insufficient budget. Therefore Kyeong-seong-bu built a new administration office building in another site and moved to it in 1926 with debts. For paying for the debts Kyeong-seong-bu sold the former site after partitioning with new roads through it. As a result the nature of the former site and its surroundings was changed. This study traces the changes and inquires how the authorities in the colonial Joseon and various commercial powers of Kyeong-seong-bu behaved for their own interests in the meantime. It makes use of the historical records and documentary literatures between early 1910s and early 1930s.

• Journal of Distribution Science
• /
• v.21 no.8
• /
• pp.1-10
• /
• 2023

Purpose: This study intends to explore the knowledge distribution in immigrant entrepreneurship in a host country Malaysia. In Malaysia, most immigrants are workers who later started their own businesses. They have a higher tendency to engage in entrepreneurial activities thus knowledge distribution from previous employment is necessary. Research design, data and methodology: This qualitative study using in-depth interview approach was carried out with five immigrant entrepreneurs from Bangladesh conducting business in Malaysia. The data were gathered and analysed using thematic analysis facilitated by ATLAS.ti software. Results: The findings provide useful insights on the significance of knowledge obtained during immigrant entrepreneurs' former employment in the host country, enabling them to identify the needed resources quickly to launch a successful business in a host country. Conclusions: This study contributes to the Knowledge Spillover Theory of Entrepreneurship specifically in the context of immigrant entrepreneurship who have former employment in the same business sector and a proposition is developed. For practicality, the findings provide some insights for immigrants who want to start businesses in the host country which allow them to identify and exploit entrepreneurial opportunities due to knowledge distribution at their former employment in the host country later facilitates successful business establishment there.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.1
• /
• pp.20-26
• /
• 2023

The defected baffle former bolts of Kori unit 1 were withdrawn to analyze the cause of damage and gamma-ray measurement is being scheduled. Prior to that, in order to calculate the specific radioactivity value of the baffle former bolt, a radioactivity calculation method considering the actual operation history of the nuclear power plant is introduced and the calculation results are shown. In particular, the radioactivity calculation method considering the operation history is obtained by defining the monthly contribution factor from the actual monthly operation history. As a result, the results considering operation history are 16-28% lower than the general radioactivity calculation results. These results can contribute to establish a reasonable but economical strategy when planning nuclear power plant decommissioning.

• Asia pacific journal of information systems
• /
• v.34 no.1
• /
• pp.321-350
• /
• 2024

When a competent employee leaves an organization, the technical skills and know-how possessed by that employee also disappear, which may lead to various problems, such as a decrease in organizational morale and technology leakage. To address such problems, it is important to increase employees' job satisfaction. Due to the advancement of both information and communication technology and social media, many former and current employees share information regarding companies in which they have worked or for which they currently work via job portal websites. In this study, a web crawl was used to collect reviews and job satisfaction ratings written by all and incumbent employees working in nine industries from Job Planet, a Korean job portal site. According to this analysis, regardless of the industry in question, organizational culture, welfare support, work system, growth capability and relationships had significant positive effects on job satisfaction, while time and attendance management, performance management, and organizational flexibility had significant negative effects on job satisfaction. With respect to the path difference between former and current employees, time and attendance management and organizational flexibility have greater negative effects on job satisfaction for current employees than for former employees. On the other hand, organizational culture, work system, and relationships had greater positive effects for current employees than for former employees.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.363-368
• /
• 2012

Nitriding and post-sintering behavior of powder mixture compacts were investigated. As mixture compacts are different from simple Si compacts, the fabrication of a sintered body with a mixture composition has engineering implications. In this research, in specimens without a pore former, the extent of nitridation increased with $Si_3N_4$ content, while the highest extent of nitridation was measured in $Si_3N_4$-free composition when a pore former was added. Large pores made from the thermal decomposition of the pore former collapsed, and they were filled with a reaction product, reaction-bonded silicon nitride (RBSN) in the $Si_3N_4$-free specimen. On the other hand, pores from the decomposed pore former were retained in the $Si_3N_4$-added specimen. Introduction of small $Si_3N_4$ particles ($d_{50}=0.3{\mu}m$) into a powder compact consisting of large silicon particles ($d_{50}=7{\mu}m$) promoted close packing in the green body compact, and resulted in a stable strut structure after decomposition of the pore former. The local packing density of the strut structure depends on silicon to $Si_3N_4$ size ratio and affected both nitriding reaction kinetics and microstructure in the post-sintered body.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.1
• /
• pp.67-74
• /
• 2020

Objectives: Previous study has shown that the positive rate of latent tuberculosis infection(LTBI) among former workers in dusty environments was higher than that among high-risk groups of tuberculosis(TB). The objective of the present study was to identify the development of active TB among former workers in dusty environments diagnosed with LTBI. Methods: Between January 2015 and May 2017, 796 former workers in dusty environments who had been subjects of epidemiology research for work-related chronic obstructive pulmonary disease(COPD) had received the QuantiFERON-TB® Gold In-Tube(QFT-GIT) from the Institute of Occupation and Environment(IOE) under the Korea Workers' Compensation and Welfare Service(KCOMWEL). Among them, 437 participants who received a health examination for work-related pneumoconiosis between January 2015 and December 2018 were selected as study subjects. Active TB was defined as a positive result for active PTB and non-tuberculosis mycobacteria infection in the result of the Pneumoconiosis Examination Council's assessment by KCOMWEL. Results: A total of 437 subjects were followed up for 2.1 years. Four of them(4/437, 0.9%) developed active TB during the follow-up period. The attack rate of active TB among subjects who were diagnosed LTBI positive and those who were diagnosed LTBI negative were 0.9%(3/320) and 0.9%(1/115), respectively. Conclusions: Most previous studies reported that the attack rate of the development of active TB in subjects who had been diagnosed LTBI positive was higher than that among subjects who had been diagnosed LTBI negative. To the contrary, the present study found that the rate of developing active TB among former workers in dusty environments diagnosed as LTBI positive was not higher than that in those who were diagnosed LTBI negative.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.32-37
• /
• 2005

The characteristics of the metal melting and radionuclide distribution of the radioactive has been investigated in a lab-scale arc furnace. The slag former based on the constituents of silica, calcium oxide, aluminum oxide, borate and calcium fluoride additions was used for melting of the stainless and carbon steel. In the melting of the stainless steel, the amount of slag formation increased with an increase of the concentration of the slag former. But the effects of the slag basicity on the amount of stag formation showed a local maximum value of the slag formation with an increase of the basicity index in the melting of the stainless steel as well as in the melting of the carbon steel. With an increase of the amount of slag former addition, the trends of the cobalt distribution into the ingot and the stag depended on the kind of slag former used in the melting of the stainless steel while the effect of the slag basicity on the distribution of the cobalt was not clarified in the melting of carbon steel. Tn the melting of the carbon steel, the strontium was captured at up to $50\%$ into the slag phase. Cesium was completely eliminated from the melt of the stainless steel as well as the carbon steel and distributed to the dust phase.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.165-169
• /
• 2007

In this study, the factors that have strong relationship with size effects on forging simulation are investigated and then a dimensionless concept is implemented into the forging simulator. The approach is applied to simulating a micro former forging process of which sequence involves a piercing process to make a hole of 0.7mm diameter of the product whose maximum diameter is 3mm. The simulated results are discussed to reveal the size effect in forging simulation.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.1
• /
• pp.3-8
• /
• 2006

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module optimal design technique and horizontal split of die insert were investigated for determining appropriate dimensions of components of multi-former die set. Results obtained, using the modules, enable the design and manufacture of a die set for a multi-former to be more efficiently performed.