• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.3
• /
• pp.27-35
• /
• 2007

The purpose of this research is to analyzing the welfare function of the senior citizen with similar type of compounding the school facility, to analyze the problematical point of present condition. And also propose the spatial constitution which the student and the regional senior citizen are easy to utilize on the basis of the result. In a type of educational facility composition, it became clear that a ratio and the inflection order that elderly welfare facilities occupied of vacant class room were low. In other words, in composition of a school facilities, elderly welfare facilities can be said to be an important problem. As a result of having analyzed an existing compound facilities, there was limited interchange of student and a the aged. In addition, there were problems such as learning environment by an intersection of circulation. Therefore, composition of educational facility and elderly welfare facilities is not space composition that is intersection of simple specification function. In other words, a program of the common space which is necessary for the local community formation is necessary. Setting of semi-public area proposes the function of the existing facility and actual condition of spatial use in prerequisite.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.965-970
• /
• 1990

A nitrogenation of coal ash in the presence of carbon was carried out to examine the effects of reaction temperature, reaction time and carbon composition on the formation of AlN, SiC and Si3N4. Decreasing the particle size increased the formation of AlN and its maximum composition in the product was obtaiend under 1450~150$0^{\circ}C$, 2 hours of reaction time and about 30% of carbon addition(on the basis of sample weight). Compositions of SiC and Si3N4 were distributed to the opposite so that SiC showed a higher composition compared with Si3N4 at a lower temperature, a shorter reaction time and a greater carbon addition.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.125-128
• /
• 2005

Oil formation rate, composition of crude oil and formation of side products such as ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene, dimer and trimer on thermal degradation of polystyrene were affected by various factors. Especially, formation of organic residue formed during reaction gave an important influence on formation of oil and composition of crude oil. Also, composition of formed crude oil showed a significant difference on reaction time. These results were caused by organic residue and carbonized solid formed during continuous reaction. Increase of residue and carbonized solid gave a decrease of yield of styrene and an increase of formation of ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene. New reaction system was proposed for continuous operation at the thermal degradation of polystyrene.

• The Korean Journal of Ceramics
• /
• v.1 no.1
• /
• pp.35-39
• /
• 1995

Yttrium aluminum garnet(YAG) powders were synthesized by spray-drying of the hydroxides coprecipitated from a mixture of aqueous solutions of $Al(NO_3)_3.9H_2O \;and\; Y(NO_3)_3.6H_2O$ Phase formation in the powders during heat treatments and their sintering charactristics were investigated. In the powder obtained by washing the hydroxides before spray-drying, a metastable yttrium aluminum hexagonal (YAH) phase was first crystallized and then transformed into YAG as temperature was increased. The formation of YAH was attributed to a deviation in compositions of the particles from the starting composition of YAG. However, the powder prepared without washing step contained a stable yttrium aluminum monoclinic(YAM) phase in addition to YAG due to a large deviation from the starting composition. A powder compact of a single phase YAG was pressureless-sintered for 4 hrs at $1700^{\circ}C$ and the density was 93% of the theoretical density.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.1000-1009
• /
• 2004

The environment friendly calcareous deposit films were formed on steel plates by electrodeposition technique in natural seawater and synthetic solutions such as dissolved $\textrm{Mg}^{2+}$ and $\textrm{Ca}^{2+}$ ions at various potential conditions. The influence of potential conditions on composition ratio, structure and morphology of the electrodeposited films were investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractor (XRD). Accordingly, this study was provided a better understanding of the composition between the growth of $\textrm{Mg(OH)}_2$ and that of $\textrm{CaCO}_3$ during the formation of calcareous deposit films on steel substrate under cathodically electrodeposition in synthetic and natural seawater. The results showed that the formation of good overall calcareous deposited film in seawater can be achieved by controlling the Ca/Mg ratio according to interfacial pH with the effective use of the electro deposition technique.

• Journal of the Korean Society of Combustion
• /
• v.8 no.2
• /
• pp.50-55
• /
• 2003

Synthesis of carbon nanofibers on a metal substrate by an ethylene fueled inverse diffusion flame was observed. Stainless steel plates were used for the catalytic metal substrate. The effects of radial distance and residence time of the substrate were investigated. The role of hydrocarbon composition in the fuel was also viewed. Nanofibers with a diameter range of 30-70nm were found on the substrate. The carbon nanofibers were formed and grown in the region from 4 to 5.5mm from the central axis of a flame outside of the visible flame front in the radial direction. The minimum residence time required for the formation of carbon nanofibers were about 20 seconds, and over 60 seconds were required for the full-scale growth. The characteristic time of the formation of carbon nanofibers was much shorter than that of the substrate temperature growth. In this study, the variation in hydrocarbon composition had no significant effect on the formation and growth of the carbon nanofibers.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1443-1448
• /
• 1994

Pb(Mg1/3Nb2/3)O3-PbTiO3-BaTiO3 solid solution was formed by mixed-oxide method. The phase during formation was analysed by XRD and formation mechanism was investigated. While heat-treating Pb(Mg1/3Nb2/3)O3 composition, the first, Pb2Nb2O7 and Pb3Nb2O8 pyrochlore phases are formed, and finally Pb(Mg1/3Nb2/3)O3 perovskite phase with containing Pb3Nb4O13 pyrochlore phase is obtained at 80$0^{\circ}C$. When Pb(Mg1/3Nb2/3)O3 composition is modified with PbTiO3 which have strong ionic bonding and high tolerance factor, the amount of pyrochlore phase is decreased by increasing of stability in perovskite structure.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.340-348
• /
• 2007

This paper deals with the complex verb formation of passive and potential predicates and syntactic structures projected by these verbs. Though both predicates are formed with the suffix -rare which has been assumed to originate from the same stem, they show significantly different syntactic behaviors. We propose two kinds of concatenation of base verbs and auxiliaries; passive verbs are lexically formed with the most restrictive mode of combination, while potential verbs are formed syntactically via more flexible combinatory operations of function composition. The difference in the mode of complex verb formation has significant consequences for their syntactic structures and semantic interpretations, including different combination with the honorific morphemes and subjectivization of arguments/adjuncts of base verbs. We also consider the case alternation phenomena and their implications for scope construals found in potential sentences, which can be accounted for in a unified manner in terms of the optional application of function composition.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.630-634
• /
• 1999

Porous mullites were fabricated using $Al(OH)_3$ and amorphous $SiO_2$ as starting materials by reaction sintering method. The molar ratios of alumina and silica varied from stoichiometric mullite composition to silica-rich and alumina-rich compositions. $AlF_3$ of 0, 1, 5, 10 wt% wad added to each composition, and the effects of composition and the additive for the formation of mullite were examined. The temperature of mullite formation decreased as the amount of $AlF_3$ increased, and themullite phase was formed in the stoichiometric composition in addition of 5 wt% $AlF_3$ at $1250^{\circ}C$ and porous whiskered mullite were synthesized in the sample sintered at $1300^{\circ}C$ and higher temperature. The effect of temperature on the mullite formation was not observed for the sample with 5 wt% or higher content of $AlF_3$, and the body showed little contraction after sintering.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.23-30
• /
• 2008

This thesis aims to analyze the visual perceptual effects drawn by 'axial composition and divergence' and to interpret the architecture of Kahn in respect of 'axial composition and divergence'. Axial composition of the form, the location of the entrance and divergence of internal movement were checked up about 53 works by extracting parti which is basic element of spatial composition. The 3D modeling simulation was performed for the selected 10 works in order to analyze the visual perceptual effect due to divergence of the internal movement. The reaction of the observer's actions and visual perception by 'axial composition and divergence' is presented in the following steps. 1. Divergence of the entrance/a panorama of expanding planes. 2. Divergence of internal movement/The process of perception of visual rotation and central spatial form. 'Perceptive form' created by 'divergence' is the result of diverse and flexible series of processes which must be experienced in person in order to reach the space as a room with a definite domain and center.