• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.381-386
• /
• 2006

Many different types of bleaching chemicals and processes have been globally used for deinked pulp. Besides chlorine-free bleaching chemicals, hydrogen peroxide, and sodium dithionite that could be used without restriction for almost all types of fibers, chlorine-containing chemicals such as chlorine dioxide and sodium hypochlorite have also used throughout the world. Even though hydrogen peroxide is commonly used in newsprint, it could not effectively increase brightness. Experimental evaluation on the possibility of using formamidine sulfinic acid (FAS), a reducing agent, for bleaching a wood-containing deinked pulp has been carried out in this study. The effect of bleaching efficiency for FAS on operational conditions and chemical concentrations compaired to hydrogen peroxide in one and two stages was studied. FAS bleaching showed higher brightness at high temperature and low consistency, and vice versa for peroxide one. Bleaching with sodium silicate and DTPA in FAS and peroxide stage showed better results than cases without them. Sodium silicate and chelant seemed minimize the influence of transition metal ions, including manganese and iron ions, which induce both bleaching agents to decompose. As a result, FAS as a reducing agent seems more effective than hydrogen peroxide for increasing brightness and reducing yellowness. FAS and FAS sequence seemed more efficient than the other two stages of bleaching sequences with regard to the best brightness level obtained. When bleaching was conducted with FAS, COD load was just about one-third compared to peroxide, and brightness stability of the bleached pulp appeared better than peroxide after UV light irradiation.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.8-15
• /
• 2012

Optical property improvements for ONP (old newspaper) and OMG (old magazine) were attempted by application of in-situ $CaCO_3$ formation process on recycled fiber surfaces. Washing treatment of ONP and OMG resulted in 35~40% yield loss for around 6% brightness improvement. Washing plus bleaching process with $H_2O_2$ and FAS (formamidine sulfinic acid) improved brightness and ERIC values a little more with the same amount of yield loss as washing treatment. In-situ $CaCO_3$ formation method improved those optical properties much better than the washing plus bleaching method without loss of yield, and better than the case of adding high brightness PCC up to the same ash level. It can be said that the in-situ $CaCO_3$ formation method may be used as an effective alternative for upgrading optical properties of recycled fibers.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.147-147
• /
• 2000

본 연구는 화장지용 펼프원료로 저급지인 색지(color ledger)고지를 사용함으로써 생산원 가를 절감하기 위한 목적으로 실시되었다. 일반적으로 색지 고지는 azo dyes, stilbene dyes, c copper phthalocyanine dyes와 같은 직접염료(direct dye)로 착색돼있는 것으로 보고되고있 다[) 한편, 펄프표백에 사용되는 약품은 hydrogen peroxide(HzOz), ozone(03), sodium h hypochloriten업oeD와 같은 산화표백제들과 F AS (formamidine sulfinic acid), sodium h hydrosulfite(NazSz04)와 같은 환원표백제들이 사용되는 것으로 널리 알려져 있다. 보통 화 장지용 펄프는 백색도가 78%이상이 되어야만 제품생산에 사용할 수 있는 것으로 인식되고 있다. 따라서 색지 고지를 이 목표로 달성하기 위한 탈색방법을 확립코자 다음과 같은 2가 지 실험을 실시하였다. 먼저, 색의 3원색인 빨강, 노랑, 파랑색의 색지 고지를 동일한 양으로 혼합하여 PY, HY, YH, YH, HY와 같은 5가지 방법의 실험을 실시하였다. 이중 YH 방법 이 가장 우수한 것으로 나타났다. 이 결과를 근거로 하여 여러 가지 색으로 구성된 색지 고 지가 50% 함유한 백상지 고지를 사용하여 Table과 같은 약품 및 조건으로 표백을 겸한 탈 묵실험을 실시하였다. 이 실험에서 백색도 81.8%, L* 93.3, a* -0.5, b* 4.1의 결과를 얻었다. 색지 고지의 탈색은 Y 단계에서 pH와 온도에 큰 영향을 받는 것으로 본 실험을 통하여 알 수가 있었다.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.66-74
• /
• 2015

DIP(deinked pulp) was bleached by FAS, $Na_2S_2O_4$ and $H_2O_2$, which are widely used in DIP bleaching process, in order to improve optical properties of DIP, and the bleaching efficiencies of DIP and environmental loads of waste water were compared, depending on bleaching chemical dosages. With the application of different bleaching chemicals, some positive improvements were shown in optical and physical properties of bleached pulp. However, the physical properties of bleached DIP and their characteristics of wastewater were remarkably different, depending on dosages and bleaching reagents. DIP chemicals with FAS and $Na_2S_2O_4$ have higher improvement in optical and physical properties than $H_2O_2$. Also, environmental loads such as pH, turbidity, SCODcr and cationic demand were decreased in reductive bleaching process. Despite of higher effectiveness of reductive bleaching process, there were some environmental problems caused by sulfur ions from FAS and $Na_2S_2O_4$. With the method of sulfur ion controls, it would be more effective than $H_2O_2$ bleaching process.