• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.127-132
• /
• 2003

We have developed a direct polymerase chain reaction (PCR) and electrophoresis method for the diagnosis of bovine theileriosis from whole blood DNA analysis without DNA extraction. The technique empolyed a FoLT (formamide, low temp.) technique and was utilized in the diagnosis of bovine theileriosis. Formamide solubilize the blood cells, and the lowered incubation temperatures reduced protein coagulation. 100-200 nL of whole blood and PCR reagents were introduced directly into a PCR tube. After the amplification, the PCR product (816-bp DNA) was introduced into the electrophoresis system. The results of this analysis were consist with those obtained using purified DNA.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.234-238
• /
• 2015

The separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction was compared by the methanol and formamide extraction. The model coal tar fraction comprising four kinds of NHC (NHCs : quinoline, iso-quinoline, indole, quinaldine) and three kinds of bicyclic aromatic compound (BACs : 1-methylnaphthalene, 2-methylnaphthalene, dimethylnaphthalene), biphenyl and phenyl ether was used as a raw material. The aqueous solution of methanol and formamide were used as solvents. A batch-stirred tank was used as the raw material - a solvent contact unit of this work. Independent of the solvent used, the distribution coefficient of NHCs sharply increased by decreasing the initial volume ratio of water to the solvent and increasing the equilibrium operation temperature, whereas, the selectivity of NHCs in reference to BACs decreased. Decreasing the initial volume ratio of solvent to feed resulted in deteriorating distribution coefficients, but the selectivity of NHCs in reference to BAC was almost the constant. The distribution coefficient of NHCs by the methanol extraction was 3~5 times higher than that of NHCs by the formamide extraction, inversely, the selectivity of NHCs based on BACs by the formamide extraction was 3~7 times higher than that of NHCs by the methanol extraction. Furthermore, two different solvent extraction methods by adding the extraction processing speed to the balance between solvency and selectivity of NHCs were compared.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.838-844
• /
• 1993

To control the pore size of silcia gel, formamide (FA), N,N-dimethyl formamide (DMF), polyethylene glycol (PEG) and polyacrylic acid (PAA) were added in the sol-gel process from starting solution with tetramethyl orthosilicate (TMOS). The gels were characterized using porosimeter, TG-DTA and SEM. As a result, the more contents of FA and PAA was increased the more gelation time was decreased, also the more contents of DMF and PEG was increased the more gelling time was increased. The mean pore size of gels was larger in the order of PAA, DMF, FA and PEG. And the mean pore size of porous silica glass was 59.0$\AA$, 31.5$\AA$, 29.9$\AA$ and 29.0$\AA$, respectively, heated at 75$0^{\circ}C$/100$0^{\circ}C$.

• Membrane Journal
• /
• v.3 no.3
• /
• pp.117-125
• /
• 1993

The CA reverse osmosis membranes were prepared and were studied the effects of parameters in membrane performance. The dope solutions were composed of polymer, formamide, acetone and 2-methoxyethanol. And it was prepared flat type membranes. The membranes were measured flux and rejection. The experimental factors such as polymer concentration, additive type, solvent evporation period, annealing temperture, and applied pressure were changed to investigate the effects of these on the membranes. And the transport parameters were also calculated at reverse osmosis medel for prepared membranes.

• Journal of Photoscience
• /
• v.6 no.4
• /
• pp.177-181
• /
• 1999

The photochemical transformation of carbon monoxide in aqueous ammonia solution has been investigated at 25${\pm}$0.1$^{\circ}C$ using 184.9 nm UV light. Amination and carbonylation processes were carried out by irradiating the aqueous ammonia solution saturated with carbon monoxide, and the formation of formamide, urea, hexamethylenetetramine, formaldehyde, glyoxal and hydrazine was observed. The formation of hydrazine was affected by the presence of ammonia, and the formation of carbonyl compounds such as formaldehyde and glyoxal was influenced by the presence of carbon monoxide. The formation of formamide, urea and hexamethylenetetramine was affected by both ammonia and carbon monoxide. The initial quantum yields of the products were determined and probable mechanisms for the photochemical reaction were presented on the basis of product analysis.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1424-1426
• /
• 2010

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.220-222
• /
• 1996

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.145-148
• /
• 1996

• Journal of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.216-224
• /
• 1963

Reaction of organic chlorine containing ester, alcohol, and acids with metallic tin and zinc in dimethyl formamide solvent gave a good yield of organo metallic complex. The same reaction under a mixed U.V. irradiation could not give an appreciable yield of the complex except in the case of an elevated reaction temperature. The solvation effect of dimethyl formamide of the metallic complex formation was markedetly increased as compared to the reaction in toluene and cyclohexane. In case of chlorine containing carboxylic acid, the formation of organo chloro zinc complex of the salt was observed. The reaction of organo zinc complex with a carbonyl precursor gave the addition product together with a dimerized product. Especially the aldehyde species enhanced the formation of zinc complex. The addition reaction was simple and convenient, but the yield was not high.(30-40% for the acid, 73% for the ester, 14.6% for alcohol). The result was discussed on basis of solvent effect and the procedures were described.

• Journal of agriculture & life science
• /
• v.43 no.2
• /
• pp.31-38
• /
• 2009

The DNA sequencer is known to be more sensitive for the quality of template DNA, method of purification followed by sequencing reaction, and gel concentration. Therefore, we investigated optimal conditions for template preparation, purification, sequencing reaction, gel concentration, and injection medium. For plasmid prepara- tion, using chloroform instead of phenol improved the average read length from 532 bp to 684 bp. The addition of 2.5% DMSO sequencing PCR reaction resulted in 200 bp longer sequences. Purification using 50 mM EDTA and 0.6 M Sodium acetate(pH 8.0) presented 20 bp longer sequences than that using 50 mM EDTA(pH 8.0) and 0.6 M sodium acetate(pH 5.2). The injection for sequencing analysis using ABI formamide presented 90 bp longer sequences than that of using formamide deionized by resin. Moreover, there were 150 bp more readable sequences in 3.6% PAGE gel than in 4%. Consequently, it was concluded that an average of 700 bp per reaction with 85% accuracy can be obtained by the following optimal conditions: template preparation using chloroform, 2.5% DMSO, 50 mM EDTA and 0.6 M sodium acetate(pH 8.0), ABI formamide and 3.6% gel concentration.