• Steel and Composite Structures
• /
• 제49권2호
• /
• pp.215-230
• /
• 2023

Cable-girder anchorage joint is the critical part of cable-supported bridges. Tensile-plate anchorage (TPA) is one of the most commonly used types of cable-girder anchorage joints in steel girder cable-supported bridges. In recent years, it has been proposed by bridge designers to apply TPA to concrete girder cable-supported bridges to form composite cable-girder anchorage joint (CCGAJ). In this paper, the mechanical performance of CCGAJ under tensile force is studied through experimental and numerical analyses. Firstly, the effects of the external prestressing (EP) and the bearing plate (BP) on the mechanical performance of CCGAJ were investigated through three tests. Then, finite element model was established for parametrical study, and was verified by the experimental results. Then, the effects of shear connector forms, EP, BP, vertical rebar rate, and perforated rebar rate on the tensile capacity of CCGAJ were investigated through numerical analyses. The results show that the tensile capacity of CCGAJ depends on the first row of PR. The failure mode of CCGAJ using headed stud connectors is to form a shear failure surface at the end of the studs while the failure mode using PBLs is similar to the bending of a deep girder. Finally, based on the strut-and-tie model (STM), a calculation method for CCGAJ tensile capacity was proposed, which has a high accuracy and can be used to calculate the tensile capacity of CCGAJ.

• 지식경영연구
• /
• 제23권4호
• /
• pp.275-294
• /
• 2022

최근 몇 년 동안 전자상거래와 소셜미디어의 지속적인 통합 발전과 함께 소셜커머스는 신뢰 중심의 사회적 거래 방식으로서 전자상거래의 중요한 형태로 자리를 잡았다. 온라인 커뮤니티의 긍정적인 측면과 풍부한 사용자 제작 콘텐츠 (UGC)로 인해 커뮤니티에 참여하는 사용자와 기업이 점점 더 증가하고 있는 추세이다. 이러한 상황에서 정보접근 비용은 지속적으로 감소하고 있고 구매 프로세스는 보다 간결하고 효율적으로 개선되고 있는 반면에 소비자의 충동구매 가능성을 크게 높이는 결과를 가져오게 된다. 그럼에도 불구하고 아직까지 소셜커머스에서 UGC의 특성을 기반으로 한 소비자 충동구매의 메커니즘에 대한 실증적 연구는 거의 없다. 본 연구는 자극-유기체-반응 (S-O-R) 모델을 이용하여 소셜커머스에서 UGC 특성이 소비자 충동구매에 미치는 영향을 분석하는 연구모형을 구축하였고, 이 과정에서 지각된 위험을 매개변수로, 유대강도를 조절변수로 각각 설정하였다. 실증분석 결과 콘텐츠 진정성, 콘텐츠 유용성, 그리고 콘텐츠 가치는 구매의사결정 과정에서 소비자의 지각된 위험에 유의한 영향을 미치고, 소비자의 지각된 위험은 충동구매에 유의한 영향을 미치는 것으로 나타났다. 한편, UGC 생산자와 이용자 간의 유대강도는 콘텐츠 유용성과 지각된 위험의 관계 및 지각된 위험과 충동구매 관계를 조절하는 것으로 나타났다. 이러한 연구결과는 소셜커머스 사업자들로 하여금 고객의 소비행동에 대한 심층적인 이해를 도울 뿐만 아니라 소비자 충동구매가 왜 일어나는지에 대한 메커니즘을 학술적 관점에서 분석할 수 있는 이론적 틀을 제공하였다는 점에서 의의가 있다.

• 대한가정학회지
• /
• 제46권2호
• /
• pp.127-135
• /
• 2008

The study purpose was to increase Han-bok's convenience by changing materials while maintaining keep the traditional Han-bok style. For this purpose we surveyed actual Han-Bok wearers about the inconveniences of its form and design by combining knit with Han-bok. On the basis of this survey, we present a practical design for use in daily fife. Responding to the question about Jeo-Go-Ri(jacket), most respondents preferred a Han-bok which stressed elasticity by utilizing knit on Jeo-Go-Ri's front and back body line(JD1, JD4). For the question about ann holes, most respondents liked a design which substituted knit materials for Sam-hoi-jang(colorful strips) to ensure ease of use and shorten both the width and length of the breast-tie(JD2, JD3). For the sleeve edge, they preferred a design which solved the difficulties of rolling up the sleeve when working ($JD2{\sim}JD5$). Regarding the most inconvenient aspect of wearing Chi-mas(skirts), the respondents indicated tightening of the breast and an uncomfortable feeling due to the skirt length. This suggested that the waist of the vest should be lengthened to avoid the feeling of pressure(CD2, CD5). Regarding changes to the skirt shape the respondents preferred buttons and hooks rather than using skirt strings(CD4, CD5).

• 국제초고층학회논문집
• /
• 제3권1호
• /
• pp.21-33
• /
• 2014

The tied braced frame (TBF) system was developed to achieve uniform seismic inelastic demand along the height of multi-storey eccentrically braced steel frames. A modular tied braced frame (M-TBF) configuration has been recently proposed to reach the same objective while reducing the large axial force demand imposed on the vertical tie members connecting the link beams together in TBFs. M-TBFs may however experience variations in storey drifts at levels where the ties have been removed to form the modules. In this paper, the possibility of reducing the discontinuity in displacement response of a 16-storey M-TBF structure by introducing energy dissipating (ED) devices between the modules is examined. Two M-TBF configurations are investigated: an M-TBF with two 8-storey modules and an M-TBF with four 4-storey modules. Three types of ED devices are studied: friction dampers (FD), buckling restrained bracing (BRB) members and self-centering energy dissipative (SCED) members. The ED devices were sized such that no additional force demand was imposed on the discontinuous tie members. Nonlinear response history analysis showed that all three ED systems can be used to reduce discontinuities in storey drifts of M-TBFs. The BRB members experienced the smallest peak deformations whereas minimum residual deformations were obtained with the SCED devices.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.91-95
• /
• 2004

Utilization of underground construction if increased by the large size ＆ skycraperlization of building recently. Therefore. waterproof dependence of underground construction is risen. However, water leakage was happened by rupture by concrete conduct, drying shrinkage. form tie. In underground environment soil class, degradation of waterproofing is showing to corrode by oil. An odious smell by oil, promotion evil of reinforcing rod corrosion, declination of durability can happen. Then, practical un degree of underground spare becomes low, Because oil or water permeates by construction by degradation to waterproof class corrode by oil, is considered to affect evil durability of construction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1979년도 하계 전자.전기연합학술발표회논문집
• /
• pp.119-120
• /
• 1979

A linear state equation of the first order differential form relating the load-frequency dynamic characteristics of interconnected power systems was derived for use in computer simulation. A now solution of the algebraic matrix riccati equation for application in quadratic optimal controllor and least-square state estimator dermination was developed. The program for a dynamic state equation for two interconnected control areas was developed. The optimized load-frequency deviation was analysed and a numerical analysis was tried based on the computer simulation. It was shown that the dynamic response of th loed-frequency could be optimized with weighting factors IR and Q. The result was that the load-frequency and the tie-line deviation were visibly reduced.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1017-1022
• /
• 2005

This article studied French case, German case, and England case of rail reform in terms of the relationship between rail infrastructure operator and train operator. Among these three cases there are tie relationship between two different operators backed up by laws. In France the relation between RFF, infrastructure operator, and SNCF, train operator is set up by laws. In Germany the infrastructure operator and train operator form a Konzern and two different operators work with close cooperation. In England SRA, a government authority, plans both infrastructure development and rolling stock demand. From these case studies a conclusion results that there should be a institutional device to maintain close relationship between infrastructure operator and train operator.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.35-38
• /
• 1999

Tube bending is an important factor of the hydroforming processes. The tube must be bent to the approximate centerline of the finished part prior to hydroforming to enable the tube to be placed in the die cavity. This paper presents the simulation results in prebending process by a rotary bending machne and a bend die that is used to form an automotive part a tie bar, Prebending simulation is carried out to obtain the shape change of cross section and thinning in bending process. To avoid occurring wrinkle in compressive zone during bending process a wiper die included,. A parametric study is carried out to obtain the effect of the forming parameters such as a bend radius and tube thickness

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1266-1271
• /
• 2009

Formwork layout is perceived as important due to its strong tie to site works. But, most formwork is done manually and influenced by worker's skill and thus, a lot of construction errors occur. The introduction of BIM (Building Information Modeling) enables acquiring more precise information on the building shape, dimension, structure, etc. than 2D-based drawings and thus, the increased productivity, such as reduction of workload and work times, and the economic efficiency, such as reduction of formwork types and form dimensions with the consideration of constructability, are expected. This study reviewed the previous studies and formwork layout systems to derive this study's differentiations and factors to be first considered for formwork planning were derived by analyzing priorities against consideration factors. Last, a flow chart and algorithm were developed to apply the derived factors to the formwork layout module.

• 복식
• /
• 제19권
• /
• pp.209-240
• /
• 1992

The costume of any nation is an attribute of a culture. This study concerns chinese and Mongolian costume's 'collar' form according to the observation of some reports about import folk materials and the pictures of the genuine objects, the author has investigated and rearranged them focusing on 13th Century's. 1. Traditional OverCoat or National costume on the poing of won dynasty in china such as Jacket, Coat, Mantle for making classical matching color, lacing, pearl pieces, and all costume shall be properly decorated and disigned. The example, Chinese Women's Gown and Double Jacket, on top of alignment of plaid, focus shall be placed on chinese classical form and color-matching, such as flowers and bireds, butterflies, made wishing ornaments, which shall be either hand painted or embroidered on collars, fronts, sleeves openings, and lower portion of gown. 2. Mongolian Costume, the stone status of a person, are seen at the territory of the Republic of Mongolia was a powerful country of Asia. So during the Mongolian Empire a lot of Missions from many countries came to kharakorom for establishing official relations between Mongolia and a country represented by mission. In particularly, the costume of mongols on the point of Chinggis khan Empire which the upper clothes in cluded ; a several kinds of the Caftan as compared with in Korea as to material (Silk caftan, Cotton Caftan, Fur Caftan) with closing to the right due to overlapping and Stand-up-Shawl Collars will pancho style & Round or V Neckline. 3. As compared with in Korea it is said that this a sort of Simui was brought in prior to the middle of Koryeo dynasty. Korean Simui system was complied with chinese system through confucian domestic behaviour. This was respected for court dress of confucian scholars, as it was, Chumri can ordinary dress of schloars) and Hakchangui ( a uniform of confucian student). Generally its form or shape of the outer lapels of Korean jacket were used together Squar-Tray-Collar. In late Yi-dynasty the inside collar length was longer than the outside collar length and the width of the collar was gradually narrow. And so the Traditional costume's outer collar of Jacket and OverCoat became small while the width and length of breast-tie became large. The same thing as the form of the collar on these days had been appeared by the design method or adjust one's dress. Therefore the form of collar in the china and Mongolian Traditional OverCoat & National Costume is fix arranged according to Stand up Collar, Without Collar, Clothing to the Right, Central opening, Horizontal Row of Button with Round or V Neckline and so on.