• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.215-230
• /
• 2023

Cable-girder anchorage joint is the critical part of cable-supported bridges. Tensile-plate anchorage (TPA) is one of the most commonly used types of cable-girder anchorage joints in steel girder cable-supported bridges. In recent years, it has been proposed by bridge designers to apply TPA to concrete girder cable-supported bridges to form composite cable-girder anchorage joint (CCGAJ). In this paper, the mechanical performance of CCGAJ under tensile force is studied through experimental and numerical analyses. Firstly, the effects of the external prestressing (EP) and the bearing plate (BP) on the mechanical performance of CCGAJ were investigated through three tests. Then, finite element model was established for parametrical study, and was verified by the experimental results. Then, the effects of shear connector forms, EP, BP, vertical rebar rate, and perforated rebar rate on the tensile capacity of CCGAJ were investigated through numerical analyses. The results show that the tensile capacity of CCGAJ depends on the first row of PR. The failure mode of CCGAJ using headed stud connectors is to form a shear failure surface at the end of the studs while the failure mode using PBLs is similar to the bending of a deep girder. Finally, based on the strut-and-tie model (STM), a calculation method for CCGAJ tensile capacity was proposed, which has a high accuracy and can be used to calculate the tensile capacity of CCGAJ.

• Knowledge Management Research
• /
• v.23 no.4
• /
• pp.275-294
• /
• 2022

In recent years, with the continuous integrative development of e-commerce and social media, social commerce, as a trust-centered social transaction mode, has become an important performance form of e-commerce. The good experience of online community and abundant user-generated content (UGC) attract more and more users and businesses to participate in the community contribution. In this context, the cost of accessing information is continuously decreasing, which not only makes the purchase process more concise and efficient, but also greatly increases the possibility of consumers' impulsive consumption. However, there are very few empirical studies on the internal influencing mechanism of consumers' impulsive consumption based on the characteristics of UGC for social commerce. In view of this, based on S-O-R model, this study constructs a model of consumers' impulsive consumption in the context of social commerce from the characteristics of UGC, with perceived risk as the mediating variable and tie strength as the moderating variable. The results show that content authenticity, content usefulness, and content valence of UGC have significant negative impacts on consumers' risk perception in the process of purchase decision-making, and consumers' perceived risk has a significant negative impact on consumers' impulsive consumption. Meanwhile, the tie strength between UGC producer and UGC receiver plays a moderating role between content usefulness and perceived risk, as well as between perceived risk and impulsive consumption. Finally, combined with the above findings, this study provides effective suggestions for relevant participants in social commerce in terms of business management.

• Journal of the Korean Home Economics Association
• /
• v.46 no.2
• /
• pp.127-135
• /
• 2008

The study purpose was to increase Han-bok's convenience by changing materials while maintaining keep the traditional Han-bok style. For this purpose we surveyed actual Han-Bok wearers about the inconveniences of its form and design by combining knit with Han-bok. On the basis of this survey, we present a practical design for use in daily fife. Responding to the question about Jeo-Go-Ri(jacket), most respondents preferred a Han-bok which stressed elasticity by utilizing knit on Jeo-Go-Ri's front and back body line(JD1, JD4). For the question about ann holes, most respondents liked a design which substituted knit materials for Sam-hoi-jang(colorful strips) to ensure ease of use and shorten both the width and length of the breast-tie(JD2, JD3). For the sleeve edge, they preferred a design which solved the difficulties of rolling up the sleeve when working ($JD2{\sim}JD5$). Regarding the most inconvenient aspect of wearing Chi-mas(skirts), the respondents indicated tightening of the breast and an uncomfortable feeling due to the skirt length. This suggested that the waist of the vest should be lengthened to avoid the feeling of pressure(CD2, CD5). Regarding changes to the skirt shape the respondents preferred buttons and hooks rather than using skirt strings(CD4, CD5).

• International Journal of High-Rise Buildings
• /
• v.3 no.1
• /
• pp.21-33
• /
• 2014

The tied braced frame (TBF) system was developed to achieve uniform seismic inelastic demand along the height of multi-storey eccentrically braced steel frames. A modular tied braced frame (M-TBF) configuration has been recently proposed to reach the same objective while reducing the large axial force demand imposed on the vertical tie members connecting the link beams together in TBFs. M-TBFs may however experience variations in storey drifts at levels where the ties have been removed to form the modules. In this paper, the possibility of reducing the discontinuity in displacement response of a 16-storey M-TBF structure by introducing energy dissipating (ED) devices between the modules is examined. Two M-TBF configurations are investigated: an M-TBF with two 8-storey modules and an M-TBF with four 4-storey modules. Three types of ED devices are studied: friction dampers (FD), buckling restrained bracing (BRB) members and self-centering energy dissipative (SCED) members. The ED devices were sized such that no additional force demand was imposed on the discontinuous tie members. Nonlinear response history analysis showed that all three ED systems can be used to reduce discontinuities in storey drifts of M-TBFs. The BRB members experienced the smallest peak deformations whereas minimum residual deformations were obtained with the SCED devices.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.91-95
• /
• 2004

Utilization of underground construction if increased by the large size ＆ skycraperlization of building recently. Therefore. waterproof dependence of underground construction is risen. However, water leakage was happened by rupture by concrete conduct, drying shrinkage. form tie. In underground environment soil class, degradation of waterproofing is showing to corrode by oil. An odious smell by oil, promotion evil of reinforcing rod corrosion, declination of durability can happen. Then, practical un degree of underground spare becomes low, Because oil or water permeates by construction by degradation to waterproof class corrode by oil, is considered to affect evil durability of construction.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.119-120
• /
• 1979

A linear state equation of the first order differential form relating the load-frequency dynamic characteristics of interconnected power systems was derived for use in computer simulation. A now solution of the algebraic matrix riccati equation for application in quadratic optimal controllor and least-square state estimator dermination was developed. The program for a dynamic state equation for two interconnected control areas was developed. The optimized load-frequency deviation was analysed and a numerical analysis was tried based on the computer simulation. It was shown that the dynamic response of th loed-frequency could be optimized with weighting factors IR and Q. The result was that the load-frequency and the tie-line deviation were visibly reduced.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.1017-1022
• /
• 2005

This article studied French case, German case, and England case of rail reform in terms of the relationship between rail infrastructure operator and train operator. Among these three cases there are tie relationship between two different operators backed up by laws. In France the relation between RFF, infrastructure operator, and SNCF, train operator is set up by laws. In Germany the infrastructure operator and train operator form a Konzern and two different operators work with close cooperation. In England SRA, a government authority, plans both infrastructure development and rolling stock demand. From these case studies a conclusion results that there should be a institutional device to maintain close relationship between infrastructure operator and train operator.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.35-38
• /
• 1999

Tube bending is an important factor of the hydroforming processes. The tube must be bent to the approximate centerline of the finished part prior to hydroforming to enable the tube to be placed in the die cavity. This paper presents the simulation results in prebending process by a rotary bending machne and a bend die that is used to form an automotive part a tie bar, Prebending simulation is carried out to obtain the shape change of cross section and thinning in bending process. To avoid occurring wrinkle in compressive zone during bending process a wiper die included,. A parametric study is carried out to obtain the effect of the forming parameters such as a bend radius and tube thickness

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1266-1271
• /
• 2009

Formwork layout is perceived as important due to its strong tie to site works. But, most formwork is done manually and influenced by worker's skill and thus, a lot of construction errors occur. The introduction of BIM (Building Information Modeling) enables acquiring more precise information on the building shape, dimension, structure, etc. than 2D-based drawings and thus, the increased productivity, such as reduction of workload and work times, and the economic efficiency, such as reduction of formwork types and form dimensions with the consideration of constructability, are expected. This study reviewed the previous studies and formwork layout systems to derive this study's differentiations and factors to be first considered for formwork planning were derived by analyzing priorities against consideration factors. Last, a flow chart and algorithm were developed to apply the derived factors to the formwork layout module.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.209-240
• /
• 1992

The costume of any nation is an attribute of a culture. This study concerns chinese and Mongolian costume's 'collar' form according to the observation of some reports about import folk materials and the pictures of the genuine objects, the author has investigated and rearranged them focusing on 13th Century's. 1. Traditional OverCoat or National costume on the poing of won dynasty in china such as Jacket, Coat, Mantle for making classical matching color, lacing, pearl pieces, and all costume shall be properly decorated and disigned. The example, Chinese Women's Gown and Double Jacket, on top of alignment of plaid, focus shall be placed on chinese classical form and color-matching, such as flowers and bireds, butterflies, made wishing ornaments, which shall be either hand painted or embroidered on collars, fronts, sleeves openings, and lower portion of gown. 2. Mongolian Costume, the stone status of a person, are seen at the territory of the Republic of Mongolia was a powerful country of Asia. So during the Mongolian Empire a lot of Missions from many countries came to kharakorom for establishing official relations between Mongolia and a country represented by mission. In particularly, the costume of mongols on the point of Chinggis khan Empire which the upper clothes in cluded ; a several kinds of the Caftan as compared with in Korea as to material (Silk caftan, Cotton Caftan, Fur Caftan) with closing to the right due to overlapping and Stand-up-Shawl Collars will pancho style & Round or V Neckline. 3. As compared with in Korea it is said that this a sort of Simui was brought in prior to the middle of Koryeo dynasty. Korean Simui system was complied with chinese system through confucian domestic behaviour. This was respected for court dress of confucian scholars, as it was, Chumri can ordinary dress of schloars) and Hakchangui ( a uniform of confucian student). Generally its form or shape of the outer lapels of Korean jacket were used together Squar-Tray-Collar. In late Yi-dynasty the inside collar length was longer than the outside collar length and the width of the collar was gradually narrow. And so the Traditional costume's outer collar of Jacket and OverCoat became small while the width and length of breast-tie became large. The same thing as the form of the collar on these days had been appeared by the design method or adjust one's dress. Therefore the form of collar in the china and Mongolian Traditional OverCoat & National Costume is fix arranged according to Stand up Collar, Without Collar, Clothing to the Right, Central opening, Horizontal Row of Button with Round or V Neckline and so on.