• 제목/요약/키워드: form oil

검색결과 488건 처리시간 0.029초

Acinetobacter sp. A54에 의한 Arabian Light 원유의 분해

  • 이창호;김희식;서현효;최성훈;오희목;윤병대
    • 한국미생물·생명공학회지
    • /
    • 제25권5호
    • /
    • pp.520-526
    • /
    • 1997
  • Bacterial strains which degrade Arabian Light crude oil were isolated by enrichment culture from oil-spilled soil. The strain A54 was finally selected after testing emulsifying activity and oil conversion rate. Strain A54 was identified as a Acinetobacter sp. based on the morphological, biochemical and physiological characteristics. It appears to be highly specialized for growth on Arabian Light crude oil in minimal salts medium since it showed preference for oil or degradation products as substrates for growth. It was found that it could grow on at least fifteen different hydrocarbons. The optimum cultural and environmental conditions were as follows; 25$\circ$C for temperature, 7,5 for pH, 2.0% for NaCl concentration and 2.0% for crude oil concentration. Additionally, the optimal concentration of NH$_{4}$NO$_{3}$, and K$_{2}$HPO$_{4}$, were 12.5 mM and 0.057 mM, respectively. Cell growth and emulsifying activity as a function of time were also determined. Crude oil degradation and the reduction of product peaks were identified by the analysis of remnant oil by gas chromatography. Approximately 63% of crude oil were converted into a form no longer extractable by mixed organic solvents.

  • PDF

폴리글리세롤 에스터를 이용한 안정한 에멀젼의 제조연구 (A Study on the Stability of Emulsion by Polyglycerol Ester)

  • 강기춘;정노희
    • 한국응용과학기술학회지
    • /
    • 제30권1호
    • /
    • pp.152-159
    • /
    • 2013
  • 폴리글리세롤에스터 유화제를 이용한 에멀젼의 입자상태 및 시간의 변화에 따른 안정성을 여러 가지 오일을 이용하여 실험을 실시하였다. 실험결과 오일의 종류에 따라 입자크기 및 안정성에 있어서 다소의 차이가 있는 것을 확인하였다. 폴리글리세롤 에스터로 유화된 가장 안정한 오일은 polar 오일인 실리콘계열과 지방산에스터 오일이고, 탄화수소계열의 nonpolar오일(Mineral oil, squalane, polydecene) 등이 유화에 있어서 가장 불안한 상태를 보였다. 식물성오일도 폴리글리세릴 에스터 유화제와는 안정한 형태의 입자형성을 보였다.

Biosurfactant를 이용한 유화 (Emulsion using Biosurfactant as Emulsifier)

  • 홍세흠;한창규;조춘구
    • 대한화장품학회지
    • /
    • 제25권1호
    • /
    • pp.137-155
    • /
    • 1999
  • 천연계면활성제인 lysolecithin과 오일성분인 squalane(SQ.), liquid paraffin(LP), octylpalminate(OP), octylstearate(OS), alkylbenzoate(AB), isostearylbenzoate (ISB)를 사용하여 제조된 에멀젼의 입자의 크기, 형상을 광산란 장치를 사용하여 다음과 같은 결과를 얻었다. 동적광산란실험을 통하여 에멀젼입자는 크기가 150nm~250nm로서 subemulsion 임을 확인하였고, 오일상의 농도가 0.25wt%에서 입자의 크기가 감소하다가 증가하는 오일의 임계농도가 있음을 알 수 있었다. 그리고 SQ에서 ISB의 순으로 오일의 극성이 증가할수록 입자의 크기가 감소함을 알 수 있었다. 정적광산란을 통하여 산란강도의 각도의존성으로부터 관성회전반경(R$_{g}$)를 구할 수 있었고 R$_{g}$/R$_{h}$로부터 극성류인 ISB, AB의 입자형태는 구형, 반극성인 LP, SQ는 타원형 그리고 비극성류인 LP, SQ는 막대형에 가까운 형태임을 알 수 있었다. 제조된 에멀젼의 점도는 구형입자에 비하여 막대형 입자의 점도가 높음을 알 수 있었다.다.다.

  • PDF

Administration of BCG-CWS in oil-in-water emulsion inhibits tumor growth and metastasis

  • Yoo, Yung-Choon;Lee, Kyung-Bok
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
    • /
    • pp.276.3-277
    • /
    • 2002
  • The antimetastatic effect of BCG-CWS. which was emulsified in an oil-in-water form with either Drakeol 6VR mineral oil (BCG-CWS/DK) or squalane (BCG-CWS/SQA), on lung metastasis produced by highly metastatic murine tumor cells. Colon26-M3.1 carcinoma cells and B16-BL6 melanoma cells. was investigated in syngeneic mice. (omitted)

  • PDF

유류성분이 지하구조물의 방수층 침식에 미치는 영향평가 (Performance analysis of waterproofing corrosion as effecting oil)

  • 김영찬;이정윤;권시원;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2004년도 학술.기술논문발표회
    • /
    • pp.91-95
    • /
    • 2004
  • Utilization of underground construction if increased by the large size & skycraperlization of building recently. Therefore. waterproof dependence of underground construction is risen. However, water leakage was happened by rupture by concrete conduct, drying shrinkage. form tie. In underground environment soil class, degradation of waterproofing is showing to corrode by oil. An odious smell by oil, promotion evil of reinforcing rod corrosion, declination of durability can happen. Then, practical un degree of underground spare becomes low, Because oil or water permeates by construction by degradation to waterproof class corrode by oil, is considered to affect evil durability of construction.

  • PDF

유류오염토양의 생물적용기술 적용타당성 검토 (Treatability Study on Oil-Contaminated Soils for Bioremediation Application)

  • 이연희;설미진;오영숙
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.578-581
    • /
    • 2001
  • A treatability study was conducted using a hydrocarbon-contaminated soil for the oPtimization of bioremediation strategy best fit to a given set of contamination. The applicability of nutrients, biosurfactant, and oil-degrading microorganisms were examined by monitoring $CO_2$ evolution and oil degradation The addition of inorganic nutrients in the form of slow released fertilizer accelerated the initial rate of $CO_2$ evolution by a factor of 3. The application of oil-degrading microorganisms did not significantly increased $CO_2$ evolution or biodegradation efficiency. Application of a commercial biosurfactant was most effect in terms of the total $CO_2$ evolution and the oil degradation rate. The results indicate that $CO_2$ evolution measurement was found to be a simple and reliable countermeasure of crude oil hydrocarbon mineralization for the rapid determination of the best-fit bioremediation strategy.

  • PDF

가솔린 엔진오일의 사용에 따른 기계적 성질의 변화에 관한 연구 (The Changes of Mechanical Properties of Used Oil in Gasoline Engine)

  • 강석춘;신성철;김동길;노장섭
    • Tribology and Lubricants
    • /
    • 제9권2호
    • /
    • pp.36-48
    • /
    • 1993
  • This study is concerned with the changes (deterioration) of the mechanical properties of used oil in the gasoline engine. The analysed properties of used oil were friction, antiwear, wear debris, load-carrying ability and the formation of surface film. From this study, it was found that the oil used in engine was deteriorated to increase the wear and fricion and decrease the load-carrying ability as the running distance of oil was increased. Also the main cause of deterioration was related to the formation of the protective film on the contact zone. When the film was composed with rich additives (sulfur), this could properly protect contact zone from the increase of wear and friction. But as oil was deteriorated, it could not form such a film and therefore the protective ability of sliding surface diminished.

급유구의 형상에 따른 박용엔진 크랭크 핀 베어링의 윤활특성 해석 (Analysis of Crank Pin Bearing with Various Inlet Groove Shape for Marine Engine)

  • 하양협;이득우;김정훈;이성우
    • Tribology and Lubricants
    • /
    • 제14권3호
    • /
    • pp.87-93
    • /
    • 1998
  • Crank pin bearing in two-stroke marine diesel engine is operated under quite severe conditions since the elements are big and heavy and the sliding speed is very slow. Therefore it is very difficult to form oil film. In this paper, two types of bearings with different groove shape are compared. One has circumferential oil groove at lower position and the other has lengthwise oil groove at upper position. Bearing clearance, oil inlet pressure and length to diameter ratio are selected as design parameters. Locus of journal center and minimum oil film thickness are investigated to compare two cases.

중국산 바르는 관절약을 복용 후 발생한 살리실레이트 중독 2례 (Salicylate Poisoning After Accidental Ingestion of Chinese Medicated Oil)

  • 이수열;유지영;조규종;유지영
    • 대한임상독성학회지
    • /
    • 제5권2호
    • /
    • pp.138-141
    • /
    • 2007
  • Because of the ready availability of aspirin, salicylate poisoning remains a common problem in many countries. Another potential source of salicylate poisoning is medicated oil containing methyl salicylate (oil of wintergreen). Methyl salicylate poses a much greater safety threat than aspirin tablets because of its liquid, concentrated form and high lipid solubility. Because of this danger, the toxic potential of medicated oil containing methyl salicylate should be fully appreciated both by physicians and by the general public. We encountered two cases of salicylate poisoning resulting from accidental ingestion of Chinese medicated oil. We report these cases along with a review of the literature.

  • PDF

고효율 냉각용 나노분말/절연유 분산액의 제조 및 열전달특성 (Preparation and Heat Transfer Properties of Nanoparticle-in-Transformer Oil Dispersions as Advanced Energy-efficient Coolants)

  • 최철;오제명
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.81-82
    • /
    • 2006
  • The purposes of the present study are to produce a high thermal efficient of oil-based nanofluids which can be used as ultra-high voltage transformer oil, and to investigate their thermal and physical properties under static and dynamic conditions. Three kinds of nanofluids are prepared by dispersing $Al_2O_3$ or AlN nanoparticles in transformer oil. The thermal conductivities of the nanoparticles-oil mixtures increase with temperature, particle volume concentration and thermal conductivity of solid particle itself. It was quite important to eliminate $H_2O$ as byproducts of esterification and excess oleic acid which did not form stable chemical bonds with powder surface to get high dispersion stability.

  • PDF