• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1263-1272
• /
• 1999

The effects of carnitine in diets with or without added fat (5% lard or soybean oil) were evaluated in 72 Large White ${\times}$ Landrace ${\times}$ Duroc pigs weaned at 35 days of age. Pigs were fed a 1.30% lysine corn-soybean basal diet+15% dried whey+4% fish meal with carnitine at 0 or 50 mg/kg and either 0% added fat, 5% soybean oil or 5% lard for 6 weeks in a $2{\times}3$ factorial trial (6 treatments, 3 pens per treatment, 4 pigs per pen). Addition of carnitine increased average daily gain (ADG) and average daily feed intake (ADFI) in the second two weeks of the six-week trial and overall, but had no significant effect on feed per gain (F/G). Lard alone depressed ADG (p<0.05) in the last two weeks of the trial and overall, but the ADG for pigs fed lard+carnitine was similar to the control. Lard reduced feed intake in the first two weeks of the trial (p<0.05). Carnitine reduced the percentage of pigs with poor (ADG<375 g/d) growth (15 vs 40%; p<0.05). The greater uniformity of growth was most evident in low-weaning-weight pigs in the second period (16 vs 62%, p<0.005). Addition of fat did not produce any positive effect on uniformity and had no interaction with carnitine on uniformity. Carnitine addition increased serum total carnitione and short-chain acyl-carnitine levels (p<0.05), but did not modify free carnitine levels. Serum carnitine levels were lower at weaning than at 14, 28, or 39 days after weaning (p<0.05). Carnitine increased serum protein levels on day 14 (p<0.05). Addition of fat in the form of soybean oil or lard did not improve piglet growth performance. Addition of 50 mg/kg of carnitine to the diet of weanling pigs enhanced postweaning performance.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.1
• /
• pp.31-36
• /
• 2004

Liquid crystalline phases were formed from acylglutamate; polyglyceryl-10 myristate and glycerine mixture and they were used as a base material for preparing an O/W emulsion. When an oil phase is added into the liquid crystalline phases, it was inserted into the dispersed liquid crystal droplets rather than stayed outside the liquid crystals, which can be known by the fact that the size of liquid crystal droplets increases with the increasing oil phase content. Along with the increase in the droplet size, the complex modulus increases from 100 to 350 pascals and the loss angle decreases from 60 to 24 degrees, from which it can be known that the increase in the internal phase volume results in the increase in the elastic property of oil in liquid crystalline-phases (O/LC). When the water phase was lastly added into the O/LC phase, the emulsification occurred to form a O/W emulsion and the averaged particle size of the O/W emulsion changes from 22.5nm to 538nm with the addition of water phase. The results from the droplet size measurements and stability tests under accelerated conditions such as high temperature show that the obtained O/W emulsion is very consistent with time.

• Journal of Nutrition and Health
• /
• v.34 no.2
• /
• pp.132-140
• /
• 2001

The effects of various dietary docosahexaenoix acid(DHA) levels on the brain phospholipids and serum and liver lipid compositions were studied in rats using DHA concentrated oil and corn oil as a control for 4 weeks. Serum total cholesterol and HDL cholesterol levels tended to be the lowest by adding 20% DHA to corn oil. Serum triglyceride levels significantly decreased by adding 30% DHA. Liver cholesterol and triglyceride levels were apparently decreased in the groups added above 20% DHA, especially, the lowest at adding 30% DHA. Brain weight and phospholipid content were not different among groups. The ratios of arachidonic to linoleic acids in serum and liver phosphatidylcholine(PC) were significantly decreased by adding dietary DHA and showed a flat form above 20% of dietary DHA. DHA levels of serum PC were gradually increased according to dietary DHA level. The fatty acid compositions of the brain PC and phosphatidylethanolamine(PE) did not appear any changes with accordance of the dietary DHA levels. However, compared with those of serum and liver in general, linoleic and arachidonic acid levels were very low. Oleic acids were apparently higher than those in the other tissues. DHA were higher than those in the other tissues rigardless of the dietary DHA, especially in brain PE. The ratios of arachidonic to linoleic acid were not apparent tendency in brain PC and PE. However, the ratios of brain PE were above 2 times higher than those of brain PC. As the results, the hypolipidemic effects of dietary DNA were remarkable in liver. Especially in regard to tendency of liver lipid levels and desaturation indices in serum and liver PC, the effects indicated significantly higher by adding 20-30% DHA to diet(n-6/n-3 ratio, about 4-7). Thus, in this study, these dietary DHA levels seemed to be appropriate, at least in these lipid paramenters.(Korean J Nutrition 34(2) : 132∼140, 2001)

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.5
• /
• pp.651-658
• /
• 2018

Particulate matter (PM) emitted from fossil fuel-combustion facilities can be classified as either filterable or condensable PM. The U.S. Environmental Protection Agency (EPA) defined condensable PM as material that is in the phase of vapor at the stack temperature of the sampling location which condenses, reacts upon cooling and dilution in the ambient air to form solid or liquid in a few second after the discharge from the stack. Condensable PM passed through the filter media and it is typically ignored. But condensable PM was defined as a component of primary PM. This study investigates the change of condensable PM according to the variation in the sulfur dioxide of combustion gas. Domestic oil boilers were used as the source of emission ($SO_2$) and the level of $SO_2$ concentration (0, 50, 80, and 120 ppm) was adjusted by diluting general light oil and marine gas oil (MGO) that contains sulfur less than 0.5%. Condensable PM was measured as 2.72, 6.10, 8.38, and $13.34mg/m^3$ when $SO_2$ concentration in combustion gas were 0, 50, 80, and 120 ppm respectively. The condensable PM tended to increase as the concentration of $SO_2$ increased. Some of the gaseous air pollutants emitted from the stack should be considered precursors of condensable PM. The gas phase pollutants which converted into condensable PM should reduced for condensable PM control.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.369-375
• /
• 2015

In this study, the formation potential and the stability of nano-emulsions were evaluated according to the structure of various cosmetic oils in Tween 80/Span 80 system using PIC method at 80 oC LP 70, Isopar H and Pripure 3759 of hydrocarbons were both form a stable nano-emulsion, particle size distribution of about 40 nm. A linear structure of silicone oil formed an unstable emulsion, but cyclic or short chain oil formed was a stable nano-emulsion. In ester oils, the particle size of emulsions increases with increasing molecular weight of oils and a stable nano-emulsion could not be obtained in the molecular weight of about 450. The particle size of the nano-emulsion against required HLB value for calculating in consideration of the lipophilic and hydrophilic oil was smaller in the HLB of 8-10.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.230-237
• /
• 2014

This study was designed to find the most suitable method and wall material for microencapsulation of the Lactobacillus plantarum to maintain cell viability in different environmental conditions. To improve the stability of L. plantarum, we developed an encapsulation system of L. plantarum, using water-in-oil emulsion system. For the encapsulation of L. plantarum, corn starch and glyceryl monostearate were selected to form gel beads. Then 10% (w/v) of starch was gelatinized by autoclaving to transit gel state, and cooled down at $60^{\circ}C$ and mixed with L. plantarum to encapsulate it. The encapsulated L. plantarum was tested for the tolerance of acidic conditions at different temperatures to investigate the encapsulation ability. The study indicated that the survival rate of the microencapsulated cells in starch matrix was significantly higher than that of free cells in low pH conditions with relatively higher temperature. The results showed that corn starch as a wall material and glycerol monostearate as a gelling agent in encapsulation could play a role in the viability of lactic acid bacteria in extreme conditions. Using the current study, it would be possible to formulate a new water-in-oil system as applied in the protection of L. plantarum from the gastric conditions for the encapsulation system used in chicken feed industry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.887-892
• /
• 2014

In a conventional magnetic abrasive polishing process, the polishing abrasives are mixed with ferrous particles and slight cutting oil to form a cluster of abrasives. However, when a tool rotates at a high revolution speed, most of the polishing abrasives are scattered away from it due to the increase in centrifugal force. This phenomenon directly reduces the polishing efficiency. The use of a highly viscous matter such as silicone gel instead of cutting oil for mixing is one method to solve this problem and increase abrasive adhesion. Another method to avoid high abrasive scattering is the application of wet magnetic abrasive polishing (WMAP). In WMAP, abundant mineral oil is preliminarily applied to the workpiece surface. This study experimentally evaluated the effect of WMAP on abrasive adhesion. The relationship between the amount of working abrasives and polishing conditions was characterized. Despite the lower adhesion ratio of polishing abrasives, the surface roughness was found to be significantly improved as the result of WMAP.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.6
• /
• pp.969-976
• /
• 2015

Macroalgal community structure was seasonally examined at Hakampo (Taean) in western coast of Korea from February 2007 to October 2010. Also, the effects of "Hebei Spirit" oil spill on the seaweed community structure were evaluated. A total of 101 macroalgal species were identified, comprising 12 green, 18 brown and 71 red algae. Species richness ranged 58-65 species with maximal in 2008 and minimal in 2009. Seaweed biomass ranged $75.81-102.06g\;dry\;wt./m^2$ (mean, $88.78g/m^2$) with maximal in 2008 and minimal in 2010. Vertical distribution from the high to low intertidal zone was Neorhodomela aculeata and Polyopes affinis; Corallina pilulifera and Chondrus ocellatus; Sargassum thunbergii and Ulva australis. Coarsely-branched seaweeds comprised the highest proportion of biomass ($37.17g/m^2$, or 41.86% of the total biomass) and ecological state group I (ESG I) seaweed biomass was between 81.67-85.44%. Also, ephemeral macroalgae including Ulva species sharply increased in species number and biomass within 1-2 year from the "Hebei Sprit" oil spill in the mid and low intertidal zone. Hakampo rocky shore is still good condition as evaluated based on macroalgal species number, biomass, and composition in functional form and ESG I seaweeds.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.77-87
• /
• 1997

PFO(pyrolized fuel oil) and $C_{10}^{+}$ oil, which are the residual heavy oils form a NCC(naphtha cracking center), were heat-treated to produce the precursor-pitch for carbon materials. After PFO was initially distilled near $300^{\circ}C$ to separate the volatile matters recovering as high-quality fuel oil, the residuum of nonvolatile precursor-pitch was then thermally pyrolized in the temperature ranges from $350^{\circ}C$ to $450^{\circ}C$. Spinnable isotropic pitch with the softening point of $200^{\circ}C$ and the toluene insolubles of 36wt% was obtained at $365^{\circ}C$, and then was successfully spun through a spinneret(0.5mm diameter). After spinning, an isotropic carbon fiber of $25{\mu}m$ diameter was obtained via oxidation and craboniation procedures. Mesophase spherules began to be observed from the product pitch pyrolized at $400^{\circ}C$, and bulk mesophase with a flow texture was observed above $420^{\circ}C$. In the case of $C_{10}^{+}$ was the feed was polymerized in the presence $H_2SO_4$ at room temperature to increase the molecular weight and then heat-treated gradually up to $200{\sim}250^{\circ}C$. The products obtained with the softening point of $80{\sim}190^{\circ}C$ were carbonized at 500 and $1000^{\circ}C$ to examine the morphology.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.400-405
• /
• 2015

Background : As the characterization of medicinal plants is an important aspect of traditional Asian herbal medicine, this study examines the morphological and anatomical characteristics in four fructus form medicinally important plants belonging to the family Apiaceae. Methods and Results : Fruit morphology of four genera was examined using microtome sections and light microscopy. The Anethi Fructus, Anethum graveolens (Siraja) has unique wing-like and membranous lateral ribs that are, approximately $500{\mu}m$ wide. The Coriandri Fructus, Coriandrum sativum (Hoyuja) does not have oil ducts at the dorsal region of the mericarp and differs in the development of the dorsal ribs. The ribs appear upon drying and therefore, consist of primary and secondary ribs. The Foeniculi Fructus, Foeniculum vulgare (Hoehyang) characteristically develops three dominant dorsal ribs and has a strong aromatic fragrance. Finally, the Cnidii Fructus, Torilis japonica (Sasangja) has many oil ducts at the dorsal and carpophores regions and develops many hooked trichomes one the fructus surface. Conclusions : We conclude from this study that each plant has several prominent and distinguishing morphological and anatomical characteristics. Therefore, fruit morphology is very useful for identifying these medicinal plants. In addition, the correct use and herbal name need to be standardized for plants used traditionally in Asian medicine within Korea, China, and Japan.