• Korean Journal of Veterinary Research
• /
• v.30 no.1
• /
• pp.79-84
• /
• 1990

A single inoculation of combined vaccines of Newcastle disease and avian infectious bronchitis of chicken, in a form of gel-oil emulsion type (gel-OEV) was tested their immunogenecity in chickens. The results were summerized as follows: 1. Average minimum and maximum ELISA antibody titers of ND were recorded 2407 and 13144 respectively. In the case of IB, 1824 and 4496 were recorded as minimum and maximum titers. 2. The distribution of average proportional groups, in the lowest and the highest, were 1.6 and 7.0 in ND ELISA and 1.4 and 2.8 in IB ELISA antibody titers. 3. ND ELISA antibody titers were significantly increased upto 7th week after the vaccination. On the other hand, IB ELISA antibody titers were raised upto 4th week after the vaccination.

• Coupled systems mechanics
• /
• v.1 no.2
• /
• pp.155-163
• /
• 2012

This paper presents analytical approximate solutions for the initial post-buckling deformation of the pipes in oil and gas wells. The governing differential equation with sinusoidal nonlinearity can be reduced to form a third-order-polynomial nonlinear equation, by coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. The linearization is performed prior to proceeding with harmonic balancing thus resulting in a set of linear algebraic equations instead of one of non-linear algebraic equations, unlike the classical method of harmonic balance. We are hence able to establish analytical approximate solutions. The approximate formulae for load along axis, and periodic solution are established for derivative of the helix angle at the end of the pipe. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.75-81
• /
• 1999

In this paper, the details of electronically controlled CVT is described , which Kia Motor company recently developed in prototype form for hybrid passenger car. This transmission has two input shafts, one for engine and the other for traction motor. The shaft for traction motor is located at rear side which is extended from primary pulley shaft and connected to traction motor through adapter gear box. Adopting two input system, various driving mode is available such as motor alone driving in hybrid vehicle application. As far as electrohydraulic system concerned , this transmission uses two bleed type variable force solenoids for line pressure and ratio control, and one on-off solenoid for clutch control. Another feature for this transmission is that oil pump for transmission is separate from CVT for supplying oil pressure even at vehicle standstill.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.4
• /
• pp.197-204
• /
• 2005

It is well known that pipelines have the highest capacity and are the safest and least environmentally disruptive form of transporting oil and gas. However, pipeline damages caused by both internal and external corrosion is a major concern threatening the reliability of oil and gas transportation and the soundness of pipeline structure. In this study, we estimated the expected allowable damage defect by comparing the ASTM B31G code which has been developed as the evaluation method of reliability and incident prevention of damaged pipelines based on the amount of loss due to corrosion and the yield strength of materials to a modified theory considering diverse detailed corrosional forms. Furthermore, we suggested the method that estimates the expected life span of used pipelines by utilizing the reliability method based on major variables such as, the depth and length of damage and corrosional rate affecting the life expectancy of pipelines.

• Journal of Korean Society for Quality Management
• /
• v.28 no.3
• /
• pp.31-43
• /
• 2000

The Service sector has increased dramatically in importance over the last decade, both internationally and in the Korea. Deregulation of services, growing competition, fluctuations in high quality demand, and the application of the Information Technologies are presenting a considerable challenge to service companies. In gas or oil companies are exposed to foreign competitions, price and promotion competition with other companies. Usually Service Quality includes five dimensions: Reliability, Responsiveness, Assurance, Empathy, and Tangibles. Customers use these five dimensions to form their judgements of service quality, which are based on a comparison between expected and perceived service. The intention of this thesis is to study on the effect of Service Quality upon the Customer Satisfaction in gas or oil station, based on SERVQUAL.

• Tribology and Lubricants
• /
• v.12 no.4
• /
• pp.52-59
• /
• 1996

The results of the electrical contact conductivity of multi-contact spots accounting the surface roughness and the non-conductive films of different origins such as air, water, cutting oil, and machining oil are presented. The array of metal spheres compressed between two flat plates has been used for simulation of the contact behavior of multiple contact of solids, under normal loading. Measurement of electrical contact resistance has been made using the equipment providing the adequate accuracy in the range of micro Ohms. The data on electrical contact resistance have been compared with theoretical predictions using the multiple contact model of constriction resistance. The effect of single spot number and array on conductivity of contact has been evaluated. The results of the experiments show that the contact resistance are closely related to the number of loading cycles, form of surface roughness, and presence of non-conductive films that reduce the size of the real electrical contact spots.

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.189-194
• /
• 2018

Porous graphites were synthesized by removing the template in HF after cabothermal conversion for 3 h at $900^{\circ}C$, accompanied by intercalations of pyrolyzed fuel oil (PFO) in the interlayer of Co or Ni loaded magadiite. The X-ray powder diffraction pattern of the porous graphites exhibited 00l reflections corresponding to a basal spacing of 0.7 nm. The particle morphology of the porous graphites was composed of carbon plates intergrown to form spherical nodules resembling rosettes like a magadiite template. TEM shows that the cross section of the porous graphites is composed of layers with very regular spaces. In particular, crystallization of the porous graphite was dependent on the content of Co or Ni loaded in the interlayer. The porous graphite had a surface area of $328-477m^2/g$. This indicates that metals such as Co and Ni act as catalysts that accelerate graphite formation.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.64-71
• /
• 2002

A new model utilizing a transfer function was proposed in the previous paper fur analizing motion errors of hydrostatic tables. Validity of the proposed method was theoretically verified as the calculated motion errors were compared with the results by conventional multi pad method. In this paper, relationship between form error of rail and motion errors of hydrostatic table is analized theoretically in order to comprehand so-called ‘averaging effect of oil film’. Experiments on the motion errors of hydrostatic table is conducted with 3 different rails, and the results are compared with the results calculated by Transfer Function Method. The results show good agreement. From the results, it is verified that TFM is very effective to analize the motion errors of hydrostatic table.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.1-5
• /
• 1999

The bioavailabilities of baicalin in water, oil, w/o and o/w emulsion were evaluated in rats. The dissolution rate of baicalin in o/w emulsion was smaller than those of w/o form in dilute hydrochloric acid solution (pH 1.2) and in PBS (pH 6.8). The absorption rate of baicalin from w/o emulsion was smaller than that of o/w emulsion in the different parts of rat intestine of the rats. Following oral administration in rats, the $C_{max}$ of baicalin from water phase, oil phase, o/w wand w/o emulsion were 2.11, 0.61, 1.57, and $1.35\;{\mu}g/ml$, respectively. The relative bioavailability of w/o emusion was 129 % when it was compared with water phase. This result suggests that the improvement of bioavailability for baicalin in w/o emulsion might be practically available.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.454-458
• /
• 2001

A new model utilizing a transfer function was proposed in the previous paper for analizing motion errors of hydrostatic tables. Validity of the proposed method was theoretically verified as the calculated motion errors were compared with the results by conventional multi pad method. In this paper, relationship between form error of rail and motion errors of hydrostatic table is analized theoretically in order to comprehand so-called 'averaging effect of oil film'. Experiments on the motion errors of hydrostatic table is conducted with 3 different rails, and the results are compared with the results calculated by Transfer Function Method. The results show good agreement. From the results, it is verified that TFM is very effective to analize the motion errors of hydrostatic table.