• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.335-340
• /
• 2012

During the manufacturing process of chestnut, 50% of biomass is produced as chestnut shell (CS) or chestnut hull (CH), a forestry by-product. Due to its high fiber content and economic benefit, there is a possibility of using chestnut hull as a supplement for a ruminant diet. Few studies, however, have been conducted on evaluating nutritive value of chestnut hull for ruminant animals. The objective of this study were thus to analyze chemical composition of CS, a by-product after the first processing of chestnut, and CH, a by-product after the second processing, and access in vitro rumen fermentation characteristics of them. For the in vitro fermentation using strained rumen fluid obtained from a fistulated Hanwoo steer, commercial total mixed ration (TMR) for dairy goat was used as a basal diet and was replaced with different proportions of chestnut shell and hull. A total number of 13 treatments were carried out in this study: 100% TMR, 100% CS, 100% CH, a mix with 50% CS and 50% of CH (MIX), TMR replaced with 5%, 10%, or 15% of CS, CH, or MIX, respectively. For each treatment, in vitro dry matter digestibility (IVDMD) and pH after 48 hours of rumen fermentation were measured. Gas production at 6, 12, 24, 48 hours of incubation was also analyzed. Compared to CH, CS contains higher level of fiber (NDF, ADF, lignin) and consequently has a lower amount of non-fiber carbohydrate, but no difference was observed in the other nutrients (i.e. crude protein, crude fat, and ash). IVDMD was significantly (p<0.05) the highest in 100% CH (71.97%) and the lowest in 100% CS (42.80%). Addition of CH by replacing TMR did not affect IVDMD, while an increase in the proportion of CS tended to decrease IVDMD. The total gas production after 48 hours of incubation and the rate of gas production were also the highest in 100% CH and the lowest in 100% CS (P<0.05). Likewise, the pH after 48 hours of fermentation was significantly (p<0.05) the lowest in 100% CH (6.33) and the highest in 100% CS (6.50), and no significant difference in gas production was observed when TMR was replaced with CS or CH up to 15% (P>0.05). In conclusion, CH may successfully be used for a supplement in a ruminant diet. The nutritive value of CS is relative low, but can replace, if not 100%, low quality forage. This study provides valuable information about the nutritive value of CS and CH. An in vivo trials, however, is needed for conclusively accessing the nutritive value of CS and CH.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.78-83
• /
• 1999

This study was carried out to investigate the strength and techanical feasibility of laminated lumber from small-diametered Pinus densiflora. Small lumber is currently not used for structural laminated lumber sonstruction, but its properties may of elasticity(MOE). Twenty specimens were compared for each beam from laminae. The results showed that actual beam MOE values exceeded slightly the preducted values. Based on the evaluation and analysis of thirty six Pinus densiflora laminated beams, a bending strength of 673 kgf/$cm^{2}$, and MOE of 98,200 kgf/$cm^{2}$ were obtained. It was suggested that this small lumber may be a candidate for structural laminated beam construction to provide the proper combinations of laminae.

• Korean Journal of Organic Agriculture
• /
• v.11 no.3
• /
• pp.91-108
• /
• 2003

So far, we have pursued only convenient and efficient growth of economy, as a result, environment surrounding us has been destroyed and the rights of our existence gotten to be even threatened. We need to ensure our lives and at the same time, need a power with which agriculture undertakes global circulation structure and a power that is able to preserve our environment we live per so. Therefore, in the near future, the final objectives of agriculture structure for 21st century would be to increase productivity of highly developed agricultural products in accordance with the ecosystem and a recycling agriculture. What is a recycling agriculture\ulcorner In the narrow sense, it means provisions-producing- system related to interactive recycle of material among forestry, livestock husbandry and seeding agriculture. In the broad sense, it means to produce credible agricultural product by keeping balanced resources via conversion to complete degradable material of organic wastes produce within rural village. Based on this concept, finally, our goal is to construct the resources recycling community. Environment friendly agriculture ⇒ organic agriculture ⇒ recycling (circulation) agriculture ⇒ construction of community with resources recycling. Therefore, in order to construct recycling agriculture, most of all, it is considered that the following, it should be established reasonable standard amounts for fertilizer, manure and liquid fertilizer based on results of soil test by each region, nature-recycling form of crops production and livestock production systems by maximizing utilization of different recycling byproducts occurring in the crop producing process by each region.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.127-134
• /
• 2014

This study, in order to complement instability of analysis result stemming from the choice between reference point and comparison point which is pointed out as the defect of shift-share analysis, conducted shift-share analysis using Gross Regional Domestic Product (GRDP) trend of Geumgang area, Chungcheongnam-do for the period from 2000 to 2011. As a result of the analysis, (1) industries that had both the positive Regional Share Effect (RSE) and Industrial Mixed Effect (IME) were service industries such as manufacturing industry, electricity gas, transportation industry, art, etc., which are positively influencing the regional industry. (2) industries that had both the negative RSE and IME were other service industries such as wholesale and retail businesses, lodging industry, food industry, real estate business and leasing service, business service industry, public administration, etc., which provide basic livelihood services for the residents. (3) industries that had the positive RSE and negative IME were agriculture, forestry and fishery industry, mining industry, construction industry, and educational service industry. (4) industries that had the negative RSE and positive IME were info-communications industry, financial and insurance businesses, health industry, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.415-422
• /
• 2018

Terpenoids have a wide range of biological functions and have extensive applications in the pharmaceutical, cosmetic, and flavoring industry. The white-rot fungus, Polyporus brumalis, is able to synthesize terpenoids via terpene synthase, which catalyzes an important step that forms a large variety of sesquiterpene products from farnesyl pyrophosphate (FPP). To improve the production of sesquiterpenes, the terpene synthase gene was isolated from Polyporus brumalis and was heterologously transformed into a Pichia pastoris strain. The open reading frame of the isolated gene (approximately 1.2 kb) was inserted into Pichia pastoris to obtain a recombinant enzyme. Five transformants were obtained and the expression of terpene synthase was analyzed at the transcript level by reverse transcription PCR (polymerase chain reaction) and at the protein level by SDS-PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis). Expression of the terpene synthase gene product was elevated in the transformants and as expected the molecular weight of the protein was approximately 45 kDa. These recombinant enzymes have potential practical applications and future studies should focus on their functional characterization.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.315-322
• /
• 2018

Bamboo culm comprises internodes and nodes and is tapered from the bottom to the top. Anatomically, bamboo culm comprises vascular bundles and parenchymal base tissue. The gross anatomical structure of a transverse section of any culm internode is determined by the shape, size, arrangement, and number of vascular bundles. The purpose of this research was to examine the morphology of culm and the distribution and shape of vascular bundles in Ampel bamboo (Bambusa vulgaris). Bamboo culms were harvested from the base. Test samples were obtained from a central 2-cm long segment of each internode across the entire length of the culm. Results showed an uneven spread of vascular bundles in the internode cross-section. Transitioning from the outer to the inner layer of the internode, the number of vascular bundles per unit area decreased and their shape was variable. The size of vascular bundles in the middle layer of the internode was greater than that of those in the outer and inner layers. The shape of vascular bundles was circular in the outer layer, which gradually transformed into vertical oval toward the middle layer and horizontal oval toward the inner layer. Vascular bundles were of type III and IV in the bottom of the culm and type III in the middle to the top of the culm.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.275-294
• /
• 1987

In the United States, forest administration is a constantly changing complex of policies, programs, and management regulations. Forest administration is the product of a brief but tumultuous history during which much of the forests which once covered half the land were coutover for farms, industry, and cities. In the last 15 years, forest administration has been increasingly dominated by concerns for maintaining an ecological balance. Current forest administration is deeply rooted in the American traditions of decentralized federalism and free enterprise, yet combines state socialism and private capitalism. The major elements of U.S. forest administration consist of : 1) programs and policies on taxation, professional education and research, and "cooperative forestry", 2) state controls on forest practices for privately owned lands, and of federal policies and regulations for the management of federal lands. The federal Forest Service has played a lead role in developing and implementing national forest policies and programs. Since the end of World War II, the national forests managed by the Forest Service for multiple use have provided and ever growing fraction of domestic timber needs. In the coming decades, cultural and social trends may force a change in management policy on federal land, reducing the importance of timber harvesting in relation to amenity values.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.352-358
• /
• 2018

This research paper investigates available options for implementing clean development mechanism (CDM) project in Sarawak state, Malaysia. To investigate economic feasibility, data was collected using survey and field research methods. Also, economic analysis was estimated using net present value (NPV), internal rate of return (IRR) and payback period (PBP) during the 30 years CDM: afforestation and reforestation periods. The result of economic analysis indicated that, the payback period was estimated at 9 years with 18 percent of internal rate of return (IRR). This study also highlighted that CDM biomass supply project have a lot of challenges due to the reduction and exclusion of bio-Solid Recovered Fuel (SRF), supply and demand scenario, and impact of restriction of illegal logging in Malaysia. This study results demonstrate the methodology and guideline for future CDM investment and projects.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.361-369
• /
• 1998

Recently, the improvement of on-board satellite sensors covering hyperspectral image sensors, high spatial resolution sensors provide data on earth in diverse aspect. The application field relating remotely sensed data also varies depending on what type of job one wants. The various resolution of sensors from low to extremely high is also available on the market with a user defined specific location. The expense to purchase remote sensed data is going down compare to the cost it need past few years ago in terms of research or private use. Now, the satellite remote sensed data is used on the field of forecasting, forestry, agriculture, urban reconstruction, geology, or other research field in order to extract meaningful information by applying special techniques of image processing. There are many image processing packages available worldwide and one common aspect is that they are expensive. There need to be a advanced satellite data processing package for people who can not afford commercial packages to apply special remote sensing techniques on their data and produce valued-added product. The study was carried out with the purpose of developing a special satellite data processing package which covers almost every satellite produced data with normal image processing functions and also special functions needed on specific research field with friendly graphical user interface (GUI). And for the people with any background of remote sensing with windows platform.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.503-512
• /
• 2020

Using Na₂CO₃ versus NaCl as chemical activator, we compared the quality of activated carbon produced from oil palm fronds as raw material. These activators were selected for comparison because both are readily available and are environmentally friendly. In the manufacturing, we used Indonesian National Standard (SNI 06-3730-1995) parameters. For the quality comparison, we determined activated-carbon yield, moisture, ash, volatiles, and fixed-carbon contents; and adsorption capacity of iodine. The best characteristics, assessed by morphological surface analysis and Fourier transform infrared (FTIR) spectral analysis, were observed in the carbon activated by Na₂CO₃ at an activator concentration of 10% and carbonization temperature of 400 ℃. The results were as follows: activated-carbon yield, 84%; water content, 8.80%; ash content, 2.20%; volatiles content, 14.80%; fixed-carbon content, 68.60%; and adsorption capacity of iodine, 888.51 mg/g. Identification using the FTIR spectrophotometer showed the presence of the functional groups O-H, C=O, C=C, C-C, and C-H in the Na₂CO₃-activated carbon.