• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.49-58
• /
• 2011

The maximum drying shrinkage velocity was proposed to verify bulk and stiffness improvement mechanism during drying according to papermaking parameters. It was based on the wet-web shrinkage behavior without the restraint of wet-web during drying, so intact drying impact could be measured. Bulking agent reduced the drying shrinkage and the maximum drying shrinkage velocity, so paper bulk increased and paper strength decreased. When adding cationic starch to stock with the bulking agent for strengthening, the bulk was increased further with additional decreasing of the drying shrinkage and the maximum drying shrinkage velocity. Paper strength also increased except tensile stiffness index with decreasing the drying shrinkage and the maximum drying shrinkage velocity. When using additional strength additives for strengthening of fiber interfaces extended by bulking agent and cationic starch, amphoteric strength additive increased paper stiffness without loss of paper bulk. It was considered that the added amphoteric strength additives were cross-linked to the stretched cationic starch and this cross-linking increased elasticity of fiber-polymer-fiber interfaces without changing the drying behavior. Paper bulk could be increased with decreasing the maximum drying shrinkage velocity. The drying shrinkage of paper also could be controlled by fiber-to-fiber bonding interfaces by the bulking agent. In this case, paper strength including stiffness was decreased by reducing fiber-to-fiber bonding but it could be improved by strengthening fiber-to-fiber interfaces with polymer complex without loss of bulk.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.12-19
• /
• 2010

This study was carried out to explore the availability of seedling pots made from paper mill sludge using red pepper species called Nokkwang. The seedling pots were made by several conditions such as different mixing ratios between sludge and old newspaper (ONP), sterilizing treatment and latex coating. After 30 day cultivation in a green house, the growth condition of the red peppers was evaluated by comparison with those raised in the plastics seedling pots. The red peppers in the plastics pot showed a better growth than those in the sludge pots. Sterilizing treatment, latex coating and different mixing ratios between paper sludges and ONP did rarely affect a growth rate of the plant and the contents of inorganic elements. However, latex coating contributed to protection of physical structure of the sludge pots in spite of constant water feeding. Even though some inorganic elements from the sludge pots migrated into the bed soils, electronic conductivity of the bed soils was within the proper range for the plant growth. Finally it was confirmed that the seedling pots made from paper mill sludges could be used to cultivate horticultural plants as the alternative to the plastics pots.

• International Journal of Reliability and Applications
• /
• v.7 no.1
• /
• pp.27-39
• /
• 2006

Many real world cases in material failure analysis do not follow perfectly the normal distribution. Forcing of the normality assumption may lead to inaccurate predictions and poor product quality. We examine the failure process of the internal bond (IB or tensile strength) of medium density fiberboard (MDF). We propose a forced censoring technique that closer fits the lower tails of strength distributions and better estimates extremely smaller percentiles, which may be valuable to continuous quality improvement initiatives. Further analyses are performed to build an accelerated common-shaped Weibull model for different product types using the $JMP^{(R)}$ Survival and Reliability platform. In this paper, a forced censoring technique is implemented for the first time as a software module, using $JMP^{(R)}$ Scripting Language (JSL) to expedite data processing, which is crucial for real-time manufacturing settings. Also, we use JSL to automate the task of fitting an accelerated Weibull model and testing model homogeneity in the shape parameter. Finally, a package script is written to readily provide field engineers customized reporting for model visualization, parameter estimation, and percentile forecasting. Our approach may be more accurate for product conformance evaluation, plus help reduce the cost of destructive testing and data management due to reduced frequency of testing. It may also be valuable for preventing field failure and improved product safety even when destructive testing is not reduced by yielding higher precision intervals at the same confidence level.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.914-919
• /
• 2006

We investigated the catechin content in green tea leaf (GTL) and green tea seed (GTS), the antiproliferative and detoxifying phase II enzyme-inducing activities of the methanolic (80%, v/v) extracts from GTL and GTS. GTL and GTS contained $8,685{\pm}1,061$ and $108{\pm}32\;{\mu}g/g$ epigallocatechin gallate (EGCG), $11,486{\pm}506$ and $116{\pm}72\;{\mu}g/g$ epigallocatechin (EGC), $3,535{\pm}308$ and $821{\pm}95\;{\mu}g/g$ epicatechin gallate (ECG), and $1,429{\pm}177$ and $37{\pm}44\;{\mu}g/g$ epicatechin (EC), respectively. The methanolic extract of GTS showed a greater increase in quinone reductase activity and antiproliferation potential against mouse hepatoma cells than GTL extract did. GTS treatment resulted in the accumulation at sub-G1 phase of mouse hepatoma hepa1c1c7 cells as assessed by flow cytometry. Enhancement of phase II enzyme activity by GTS extract was shown to be mediated, directly or indirectly, via interaction with the antioxidant response element (ARE) sequence in the genes encoding the phase enzymes. As the catechin content in GTS was significantly lower than that in GTL, components other than catechins appear to be responsible for the anticarcinogenic activity of the seed. In summary, these results suggest that the 80% methanolic extract of GTS deserves further study to evaluate its potential as an anticarcinogenic agent and to investigate its mechanism of action.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.429-436
• /
• 2011

The selected physical and mechanical properties of non-certificated LVL circulated in domestic lumber market were investigated and compared to relevant standards. The tested LVL passed the moisture content and the soaking delamination rate limit as per domestic (KS) and Japanese standard (JAS). The evaluated mechanical properties were flatwise/edgewise bending strength, modulus of elasticity (MOE), horizontal shear and compressive strength. The 30 mm-thick LVL showed significantly higher bending strength than that of the 25 mm-thick LVL. The modulus of elasticity (MOE) showed same tendency in the results of bending strength. The edgewise bending strength and MOE were higher than that of flatwise bending strength and MOE. The horizontal shear strength values were also showed similar results to bending strength values. The tested results were compared each other and each products were graded according to JAS 701 grade specification. The failure mode of LVL in bending test showed the similar failure mode of solidwood that failed in a simple tension manner (splintery tension). The glue line failure was severe in 25 mm-thick specimens due to concentration of shear stress in layer discontinuity containing small voids and starved glue lines. In horizontal shear strength test, failure mode of LVL showed the typical horizontal shear failure. Compressive specimens failed with fiber crushing in company with apparent delamination that splitted along the length of the specimens. From the results, the complete bonding between lamination and consistency in thin veneer layer were considered as a critical factor in the mechanical properties of LVL. Moreover, the standard test procedure and specification for non-certificated LVL should be required to check the performance of uncertificated materials.

• Journal of the Korea Furniture Society
• /
• v.22 no.2
• /
• pp.101-111
• /
• 2011

The intention is to explore the differentiation or evolution of the chest of drawers in traditional Korean, Western, and Japanese furniture in order to know how the drawers currently becoming popular in Korea were developed historically. The Korean furniture centered in $Jang$, $Nong$, and $Bandazi$ used in the tradition generally, the Western furniture involved in drawers, and the Japanese furniture called $Tansu$ in Japanese called the chest of drawers were focused on the study because the Western and Japanese drawers affected the development of the chest of drawers in Korean furniture during the late 19th century and the Japanese Ruling Era, respectively. As a result, the Korean furniture was not shown the chest of drawers but only small drawers that store small items located in the upper part of $Jang$, $Nong$, and $Bandazi$ mostly used as wardrobe, while the traditional Japanese furniture developed from Edo period (1607-1868) had showed a wide variety of chest of drawers like $Isho-dansu$, $Mizuya-dansu$, $Kusuri-dansu$, $Cho-dansu$, $Funa-dansu$, $Kaidan-dansu$, $Nagamochi-dansu$, $Kuruma-dansu$, and so on, for specialized storage. And in the traditional Western furniture were presented the chest like a large-box form, mule chest, chest of drawers, cabinet, commode, highboy, tallboy, wardrobe, secretary drawer and bureau with document drawer invented and evolved throughout the 15th-18th century. Therefore, the chest of drawers in contemporary Korean furniture is supposed to adopt the Japanese and Western drawer form and to ensure the continual production from the obvious utility of the design with decoration for our current everyday lives.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.11-19
• /
• 2014

Reliability of the novel automatic system capable of measuring both St$\ddot{o}$ckigt sizing degree and contact angle at a time was evaluated through the calculation of its repeatability and reproducibility based on TAPPI Standard Method T 1200. As the basis weight of paper specimen increased, the repeatability and reproducibility of the automatic system became more improved than those from Hercules sizing test and contact angle test designated on TAPPI Standard Method T 530 and T 558. The more improved repeatability and reproducibility implies that a single tester can obtain the similar results under similar test conditions in spite of repetitive testing using the automatic system, and likewise that multiple testers can respectively reproduce similar data without big variation from the same paper specimen using the automatic system. In conclusion, this study is greatly meaningful in having developed the world's first automatic system to measure both St$\ddot{o}$ckigt sizing degree and contact angle simultaneously with excellent repeatability and reproducibility.

• The Korean Journal of Applied Statistics
• /
• v.30 no.5
• /
• pp.681-690
• /
• 2017

Various imbalanced binary classification problems exist such as fraud detection in banking operations, detecting spam mail and predicting defective products. Several sampling methods such as over sampling, under sampling, SMOTE have been developed to overcome the poor prediction performance of binary classifiers when the proportion of one group is dominant. In order to overcome this problem, several sampling methods such as over-sampling, under-sampling, SMOTE have been developed. In this study, we investigate prediction performance of logistic regression, Lasso, random forest, boosting and support vector machine in combination with the sampling methods for binary imbalanced data. Four real data sets are analyzed to see if there is a substantial improvement in prediction performance. We also emphasize some precautions when the sampling methods are implemented.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.41-47
• /
• 1998

Some white-rot fungi, screened at the Laboratory of Forest Products Microbiological Chemistry, Chungbuk National University were cultured and added the inducer of laccase enzyme, 2,5-xylidine. The fungi named by CB-13, CB-20, CB-99, CB-100 and CB-123 strains showed positive results in the decolorization of aromatic compounds, carminic acid and Rhemazol brilliant blue R. Concerned to the inducing effect of 2,5-xylidine on laccase activity, CB-20, CB-100 and CB-123 strains showed very high activity by addition of 2,5-xylidine, whilst CB-13, CB-99 and CB-124 strains produced relatively high laccase enzymes, regardless of inducer addition. There were no any laccase activities on CB-25, CB-64 and CB-139, even in addition of inducer. It is confirmed that some screened fungi have decolorizing ability on aromatic compounds, carminic acid and Rhemazol brilliant blue R. Also, the addition of inducer, 2,5-xylidine, has increased the activity of laccase enzyme which is secreted from some white-rot fungi.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.209-213
• /
• 1999

In the society of the 21\ulcorner century under multiphase media conditions, the rapidly glowing electronic media will replace the conventional paper media in a variety of areas. However, if human being still has an affinity for paper media and an instinct for hardcopy from electronic-based text or image, the new market will be created for the paper industry. To what extent the consumer choses paper media for output will depend upon the availability of functions of paper media appealing to human senses; i.e., "sensory functions of paper". As a whole, on-demand type personal as well as business communications will increase in the next century and this trend will lead certainly to a rapidly expanding "contents hardcopy market". The technological progress of the paper industry in the 21\ulcorner century depends upon the market needs for higher products quality and higher efficiency of manufacturing process as well as an endeavour to overcome constraints from forest resource, energy, and environmental issues. Under the conditions with above constraints, the paper media will be polarized into two categories; (1)paper for higher image reproduction capability for original image or text and (2)paper for lower reproduction but with higher appeals for human senses. To cope with these trends, psycho-physical analysis and a sensory engineering approach for developing new paper media is vitally required. Also newly emerged roles of paper physics in the multimedia age is pointed out associated with sensory functions of paper that are not well-understood so far.