• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.974-979
• /
• 1990

The system discussed in this paper is an integrated stand-alone system with the full functional capabilities required of a telerobot system. It is complete with a force-reflecting 6-DOF hand controller, driving a PUMA 560 or 762 robot, with an integrated force-torque sensing wrist sensor and servo-driven parallel jaw gripper. A mix of custom and standard electronics, distributed computers and microprocessors, with embedded and downloadable software, have been integrated into the system, giving rise to a powerful and flexible teleautonomous control system.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.369-374
• /
• 2015

본 논문에서는 PSC 거더의 Prestress를 관리하기 위하여 EM 센서를 활용한 PSC 텐던 긴장력 손실 관리 기법을 소개한다. PSC 거더는 콘크리트 거더에 Prestress를 도입함으로써 기존 콘크리트 거더보다 높은 성능을 가지며 보다 저비용의 거더 설계가 가능해 짐으로 현재 많은 교량에 사용되고 있는 거더이다. 그러나 PS 텐던의 긴장력 관리는 거더 성능 관리에 있어 매우 중요한 항목이나 현재는 시공시 설계 긴장력의 도입 여부만을 검증한 후 공용시에는 그 관리가 이루어지지 않는 실정이다. 이에 본 연구에서는 강자성 재료가 인장력에 따라 비투자율이 변화하는 특성을 이용하여 EM 센서를 이용해 PS 텐던의 투자율을 계측하여 PS 텐던의 긴장력을 계측하는 기법을 제안하였다. PSC 거더 내부에서 PS 텐던의 투자율을 계측하기 위하여 EM 센서 시작품을 제작하였으며 MTS 실험을 통해 PS 텐던으로 주로 사용되는 7연선 1가닥의 0, 40, 80, 120, 160, 200kN의 긴장력에 따른 투자율 변화를 계측하였다. 계측 결과 각 긴장력 단계마다 EM 센서를 통해 계측된 B-H Loop가 정량적으로 변화하는 것을 확인하였으며 계측된 투자율과 긴장력을 회귀분석한 결과 투자율과 긴장력은 선형 관계를 나타내었다. 이를 활용하여 EM 센서를 이용하여 PS 텐던의 긴장력 관리가 가능함을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1642-1647
• /
• 2003

The market of the horizontal axis washing machine (drum washing machine) has been growing drastically in Korea by about 80% annually since 2000. As market grows fast, the customerTs demands concerning quality becomes more strict and various. Imbalance sensing is a key technology to reduce the NVH problem in a washing machine, because the laundry is time-variant and uncontrollable source of imbalance, which can cause more than 200kgf exciting force. In this paper, imbalance-sensing methods are briefly reviewed, new acceleration sensing circuits are examined, and finally the control algorithm of spinning process is proposed and validated.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.84-91
• /
• 2012

Single and few-layer graphene nanosheets (GNs) have successfully synthesized by a modified Hummer's method followed by chemical reduction of exfoliated graphene oxide (GO) in the presence of hydrazine monohydrate. GO and GNs were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), X-ray diffractions (XRD), Raman spectroscopy, Transmission electron microscopy (TEM), Atomic force microscopy (AFM), Optical microscopy (OM) and by electrical conductivity measurements. The result showed that electrical conductivity of GNs was significantly improved, from $4.2{\times}10^{-4}$ S/m for GO to 12 S/m for GNs, possibly due to the removal of oxygen-containing functional group during chemical reduction. In addition, the $NO_2$ gas sensing characteristics of GNs are also discussed.

• 산업기술연구
• /
• 제32권A호
• /
• pp.29-33
• /
• 2012

We demonstrated the viability of fully microfabricating SWCNT(single-wall carbon nanotube) film strain sensors for force and weight sensing. Our spray-deposited SWCNT film strain sensors showed good linearity over a range from 0 to 400 microstrain, and much higher sensitivity compared to commercial metal foil-type gauges. The number of grids and the thickness of the SWCNT film were found to have a significant effect on the strain sensing properties of the SWCNT film gauges. A strain sensing methode for the CNT-based strain gauges was also investigated using a binocular type beam load cells. Preliminary results indicate that the microfabrication method shown here is promising for developing a commercial strain gauge using a spray-coated SWCNT thin film. In the near future, various studies will be performed to further enhance the properties of the spray-coated SWCNT film strain sensors.

• 한국정보통신학회논문지
• /
• 제2권3호
• /
• pp.303-308
• /
• 1998

As the technology of industrial automation using robot system grows the rapid advance, productivity improvement and decrease in number of maintenance, management occur in many fields. Therefore, more various and intelligent robot motions are needed without human being help. Considering this situation, the need of robot with various, fast and safe acting sensors are demanded. In these sensings, the slippage sensing gives us specific information between ripper and object while grasps the object. In this paper, we proposed new slippage sensing algorithm for various and intelligent robot motion. So, optimal grasping force control and compensation of position error is possible for an adaptive task execution using adaptive control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1692-1695
• /
• 1997

In this paper, a new control scheme for master-slave control of telerobot is proposed. The porposed method can be classified into unilater master-slave control methods in the aspect of the data flow. But the master arm in the proposed control scheme can deliver operator the similar kinesthetic sense as other bilateral force reflecting master arms do. The principle concept is that the sensed operator's force/torque is used as the reference input for a damping controller type of telerobot controller which track the operators efforts. Master arm and master controller can be implemented in a simple form, and it needs not be driven by actuators, but force sensing capability.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.62-69
• /
• 2000

Uneven clearances in the left and right sides of a press die cause deformation of the punch in precision shearing process. This deformation results from the compression stress and bending moment from shearing force in vertical direction and from the side force in horizontal direction acting to the punch, In this study the behavior of punch deformation is investigated in order to clarify the deformation state of the punch by using strain gauge deformation to shearing force side force bending moment radius of curvature and shear plane of the punch. Also we presented the calculation method of deformation size for the punch.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.66-80
• /
• 2001

In brake systems, a proportioning valve(P. V), which reduces the brake line pressure on each wheel cylinder for the anti-locking of rear wheels, is closely related to the safety of vehicles. However, it is impossible for current P. V. s to completely control brake line pressure because, mechanically, it is an open loop control system. In this paper we describe an electronic brake force distribution system using a direct adaptive fuzzy controller in order to completely control brake line pressure using a closed loop control system. The objective of the electronic brake force distribution system is to change the cut-in-pressure and the valve slop of the P. V in order to obtain better performance of the brake system than with mechanical systems.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.418-429
• /
• 2018

This paper studies the decentralized position/force control problem for constrained reconfigurable manipulator without torque sensing. A novel joint torque estimation scheme that exploits the existing structural elasticity of the manipulator joint with harmonic drive model is applied for each joint module. Based on the estimated joint torque and dynamic output feedback technique, a decentralized position/force control strategy is presented. In order to solve the problem of controller parameter perturbation, the non-fragile robust technique is introduced into the dynamic output feedback controller. Subsequently, the stability of the closed-loop system is proved using the Lyapunov theory and linear matrix inequality (LMI) technique. Finally, two 2-DOF constrained reconfigurable manipulators with different configurations are applied to verify the effectiveness of the proposed control scheme in numerical simulation.