Carbon-based nano materials have a significant effect on various fields such as physics, chemistry and material science. Therefore carbon nano materials have been investigated by many scientists and engineers. Especially, since graphene, 2-dimemsonal carbon nanostructure, was experimentally discovered graphene has been tremendously attracted by both theoretical and experimental groups due to their extraordinary electrical, chemical and mechanical properties. Electrical conductivity of graphene is about ten times to that of silicon-based material and independent of temperature. At the same time silicon-based semiconductors encountered to limitation in size reduction, graphene is a strong candidate substituting for silicon-based semiconductor. But there are many limitations on fabricating large-scale graphene sheets (GS) without any defect and controlling chirality of edges. Many scientists applied micromechanical cleavage method from graphite and a SiC decomposition method to the fabrication of GS. However these methods are on the basic stage and have many drawbacks. Thereupon, our group fabricated GS through Thermo-electrical Pulse Induced Evaporation (TPIE) motivated by arc-discharge and field ion microscopy. This method is based on interaction of electrical pulse evaporation and thermal evaporation and is useful to produce not only graphene but also various carbon-based nanostructures with feeble pulse and at low temperature. On fabricating GS procedure, we could recognize distinguishable conditions (electrical pulse, temperature, etc.) to form a variety of carbon nanostructures. In this presentation, we will show the structural properties of OS by synthesized TPIE. Transmission Electron Microscopy (TEM) and Optical Microscopy (OM) observations were performed to view structural characteristics such as crystallinity. Moreover, we confirmed number of layers of GS by Atomic Force Microscopy (AFM) and Raman spectroscopy. Also, we used a probe station, in order to measure the electrical properties such as sheet resistance, resistivity, mobility of OS. We believe our method (TPIE) is a powerful bottom-up approach to synthesize and modify carbon-based nanostructures.
In this paper, ZnO:Al thin films with c-axis preferred orientation were prepared on Soda lime glass substrates by RF magnetron sputtering technique. AZO thin film were prepared in order to clarify optimum conditions for growth of the thin film depending upon process, and then by changing a number of deposition conditions and substrate temperature conditions variously, structural and electrical characteristics were measured. For the manufacture of the AZO were vapor-deposited in the named order. It is well-known that post-annealing is an important method to improve crystal quality. For the annealing process, the dislocation nd other defects arise in the material and adsorption/decomposition occurs. The XRD patterns of the AZO films deposited with grey theory prediction design, annealed in a vacuum ambient($2.0{\times}10-3$Torr)at temperatures of 200, 300, 400 and $500^{\circ}C$ for a period of 30min. The diffraction patterns of all the films show the AZO films had a hexagonal wurtzite structure with a preferential orientation along the c-axis perpendicular to the substrate surface. As can be seen, the (002)peak intensities of the AZO films became more intense and sharper when the annealing temperature increased. On the other hand, When the annealing temperature was $500^{\circ}C$ the peak intensity decreased. The surface morphologies and surface toughness of films were examined by atomic force microscopy(AFM, XE-100, PSIA). Electrical resistivity, Gall mobility and carrier concentration were measured by Hall effect measuring system (HL5500PC, Accent optical Technology, USA). The optical absorption spectra of films in the ultraviolet-visibleinfrared( UV-Vis-IR) region were recorder by the UV spectrophotometer(U-3501, Hitachi, Japan). The resistivity, carrier concentration, and Hall mobility of ZnS deposited on glass substrate as a function of post-annealing.
The effects of resin on the respiratory health have been investigated in 309 workers from four iron and steel foundries and the results compared with those from 122 workers who were not significantly exposed to resin gas and silica dust at the same industries. Phenol-formaldehyde resin was used in the core making and molding processes and workers were exposed to their decomposition products as well as to silica dust containing particulates. The subjects were grouped according to formaldehyde, dust and other gas exposures, and smoking habits were considered also in thi analysis. Standardized respiratory symptom questionnaire was administered by trained interviewers. Chest radiograph, pulmonary funtion tests, and methacholine challenge tests were done. Environmental measurements at the breathing zone were carried out to determine levels of formaldehyde, respiable dust and total dust. Foundry workers had a higher prevalence of symptoms of chronic bronchitis with chronic phlegm and chronic cough when exposed to dust. Exposure to gas was significantly associated with lowered $FEV_1$ and obstructive pulmonary function changes. Exposure to formaldehyde and phenol gas was associated with wheezing symptom among workers, but $FEV_1$ changes after methacholine challenge were not significantly different among different exposure groups. When asthma was defined as the presence of bronchial hyperreactivity with more than 20% decrease in $FEV_1$ after methacholine challenge, 17 workers out of 222 tested had asthma. Fewer asthmatic welters were found among groups exposed to formaldehyde, gas and dust, which indicates a healthy worker effects ill a cross-sectional study. The concentration of formaldehyde gas ranged from 0.24 to 0.43 ppm among studied foundries. The authors conclude that formaldehyde and phenol gas from combusted resin is probably the cause of asthmatic symptoms and also a selection force of those with higher bronchial reactivity away from exposures.
본 논문에서는 브리징 스케일 분해를 기반으로 멀티스케일 문제에 대한 설계민감도 해석법을 개발하였다. 나노 기술의 급속한 발전으로 인해 나노 수준의 해석의 필요성이 지속적으로 증가하고 있다. 최근 분자동역학과 연속체역학의 연성문제에서 많은 해석 방법들이 개발되었다. 본 논문에서는 연성시스템 해석을 위해 브리징 스케일 기법을 사용한다. 전체 영역의 분자동역학 시스템의 해석은 많은 양의 계산 비용이 들기때문에 분자동역학과 연속체 시뮬레이션의 연성시스템을 선호한다. 분자동역학과 연속체 수준 사이의 정보 교환은 분자동역학과 연속체의 경계에서 일어난다. 브리징 스케일 법에서 일반화된 랑지벵 방정식은 축소된 영역의 분자동역학 시스템 해석을 위하여 요구되고, 시간이력 커널을 사용하여 구한 GLE 힘은 분자동역학 시스템에서 경계에 있는 원자들에 작용한다. 그러므로 분자동역학과 연속체 수준의 시뮬레이션을 분리해서 해석할 수 있으며 계산 과정을 가속시킬 수 있다. 연성문제의 시뮬레이션 이후에는 설계의 최적화를 위해 설계민감도 해석의 필요성이 자연스럽게 나타나며 전체 시스템의 성능은 나노 스케일의 효과를 고려해서 최적화된다. 설계구배 기반 최적화에서 설계민감도가 요구되지만 유한차분법으로 구한 민감도는 문제가 대형화될 때 계산비용의 제한때문에 비실용적이나 해석적 설계민감도는 효율적인 강점을 갖는다. 본 연구에서는 연성된 분자동역학-연속체 멀티스케일 문제에서 해석적 설계민감도를 유도하여 정확성과 향후 최적설계로의 활용 가능성을 확인하였다.
Photoconductive poly crystalline lead oxide coated on amorphous thin film transistor (TFT) arrays is the best candidate for direct digital x-ray detector for medical imaging. Thicker films with lessening density often show lower x-ray induced charge generation and collection becomes less efficient. In this work, we present a new methodology used for the high density deposition of PbO. We investigate the structural properties of the films using X-ray diffraction and electron microscopy experiments. The film coatings of approximately $200\;{\mu}m$ thickness were deposited on $2"{\times}2"$ conductive-coated glass substrates for measurements of dark current and x-ray sensitivity. The lead oxide (PbO) films of $200\;{\mu}m$ thickness were deposited on glass substrates using a wet coating process in room temperature. The influence of post-deposition annealing on the characteristics of the lead oxide films was investigated in detail. X-ray diffraction and scanning electron microscopy, and atomic force microscopy have been employed to obtain information on the morphology and crystallization of the films. Also we measured dark current, x-ray sensitivity and linearity for investigation of the electrical characteristics of films. It was found that the annealing conditions strongly affect the electrical properties of the films. The x-ray induced output charges of films annealed in oxygen gas increases dramatically with increasing annealing temperatures up to $500^{\circ}C$ but then drops for higher temperature anneals. Consequently, the more we increase the annealing temperatures, the better density and film quality of the lead oxide. Analysis of this data suggests that incorporation and decomposition reactions of oxygen can be controlled to change the detection properties of the lead oxide film significantly. Post-deposition thermal annealing is also used for densely film. The PbO films that are grown by new methodology exhibit good morphology of high density structure and provide less than $10\;pA/mm^2$ dark currents as they show saturation in gain (at approximate fields of $4\;V/{\mu}m$). The ability to operate at low voltage gives adequate dark currents for most applications and allows voltage electronics designs.
태평양 클라리온-클리퍼톤 균열대 지역내 KODOS(Korea Deep Ocean Study)-89 지 역에 분포하는 퇴적물중 색상차이가 뚜렸한 표층의 밝은 황색(light yellow brown) 층 과 그 하부의 어두운 갈색(dark brown) 층의 지구화학적 특성 및 원인을 규명하였다. 연구 결과 주로 4기에 퇴적된 표층의 황색 퇴적물 (unit A)에 비해 3기에 퇴적된 하부 의 갈색 퇴적물 (unit B)중 smectite 함량, 함수량, 미세망간 단괴 및 금속함량은 높 고, 반면 POC(particulate organic carbon) 함량은 낮다. 이러한 smectite와 POC의 함 량차이 unit B 에서는 unit A에 비해 상대적으로 자생 smectite의 형성시간이 길고, 유기물 분해가 장기간 이루어져 발생한 것으로 사료된다. 또한 unit B에서 함수량이 높은 원인은 unit B 중 높은 smectite 함량에 따른 점토광물간 전기적 반발력과, 난용 성 spicule 또는 spine의 많은 잔존에 의한 성진 조직으로 커진 공극율 때문으로 생각 된다. 그리고 unit B에서 망간, 니켈, 구리 등의 금속함량이 높은 원인은 퇴적물내의 높은 미세망간단괴 함량 때문이다. 위의 결과들을 종합적으로 볼 때 unit A와 unit B 의 지구화학적 특성차이는 속성작용의 지속시간 차이에 기인했으리라 생각된다.
옥타칼슘포스페이트(OCP, Ca8H2(PO4)6·5H2O)는 골전도성과 생체적합성을 가진 생분해성 인산칼슘계 재료 중 하나이다. 기질세포를 자극하여 조골세포로 분화하는 성질을 가지고 있어 빠른 골형성 및 재흡수되는 장점을 가지고 있다. 그러나 OCP가 체내에 삽입되면 분말 사이의 약한 응집력으로 인해 지지체의 형태를 유지하지 못하고 빠르게 분해된다. 반면, OCP와 유사한 결정구조를 갖는 수산화인회석(HA, Ca10(PO4)6(OH)2)은 골결손이 회복된 이후까지도 분해되지 않고 체내에 남아있다. 이 연구에서는 SBF(simulated body fluid) 용액에 HA 첨가량이 다른 OCP/HA disc을 침적한 후 기간에 따른 Weight loss, pH 변화 및 미세구조 변화의 측면에서 분해거동을 조사하였다. 그 결과 OCP/HA disc는 HA 함량에 관계없이 2주 동안 형태를 유지하였다. 특히, 40HA 시편의 표면이 균일하게 용해되는 양상을 보였고 SBF 용액 침적 후 7일 후부터 disc의 표면에 CDHA(calcium deficient hydroxyapatite)가 형성되었다. 이러한 결과는 40HA 시편이 골결손부의 회복을 위한 지지체로 적합하다는 것을 보여준다.
플럭스의 활성제 종류에 따른 솔더페이스트의 인쇄성 및 젖음성을 평가하였다. 활성제는 디카르복실산 계열로 탄소기의 개수가 0인 옥살산, 1인 말론산, 2인 숙신산, 3인 글루타르산, 4인 아디프산, 5인 피메릭산이 사용되었다. SMT scope로 $250^{\circ}C$에서 용융솔더를 실시간 관찰했을 때, 글루타르산을 사용한 솔더가 가장 매끈한 표면을 갖고, 젖음성도 우수함을 알 수 있었다. 슬럼프율은 탄소기 개수가 1, 2, 3인 말론산, 숙신산, 글루타르산을 활성제로 사용했을 때 작았고, 퍼짐성은 활성제의 탄소기 개수가 2 이상인 숙신산, 글루타르산, 아디프산, 피메릭산을 사용했을 때 우수하였다. 웨팅밸런스로 젖음성을 분석한 결과 탄소기 개수가 3이상일 때, 제로크로스타임이 1초 이하로 우수함을 알 수 있었다. 탄소기 개수가 0, 1인 옥살산, 말론산을 플럭스 활성제로 사용하였을 때, 제로크로스 타임이 길고 최대 젖음력이 낮았다. DSC와 TGA를 통해 옥살산과 말론산을 활성제로 사용한 플럭스는 솔더링 시 분해가 발생되고, 이로 인해 활성도가 떨어져서 디웨팅 등이 발생하였다. 글루타르산은 재산화가 적고, 높은 젖음성과 낮은 슬럼프 특성을 보여 주었다.
본 논문에서는 다양한 차종의 영향을 반영할 수 있고, 차량과 교량의 연성 운동방정식을 구성하여 시간 단계별 직접해를 산정할 수 있는 수치해석기법을 제시하였다. 운동방정식의 해는 직접적분법인 Newmark ${\beta}$을 이용하여 해석 단계별로 구성된 유효강성행렬과 유효하중벡터를 바탕으로 정적평형방정식의 해를 구하는 원리와 동일하게 산정하였다. 또한 해석의 효율성을 증진시키기 위하여 유효강성행렬은 Skyline 법에 의해 재구성하였으며, Cholesky의 행렬 분해기법을 동시에 적용하여 직접적인 역행렬 계산에서 야기되는 오차의 발생을 최소화 하였다. 또한 기존선 철도차량인 새마을 PMC 열차와 디젤 견인 무궁화 열차에 대한 3차원 정밀수치해석 모델을 개발하였고, 각 차량은 차체와 전 후방 대차에 각각 6자유도씩 고려하여 총 18자유도로 수치모델을 작성하였다. 교량은 3차원 공간뼈대 요소를 이용하여 모델링하였고, 차륜과 레일 접촉면의 불규칙성은 미국의 FRA에서 규정하고 있는 연직방향 및 횡방향틀림에 대한 PSD 함수를 이용하여 궤도틀림을 수치적으로 구현하였다. 제시된 수치해석 기법은 12 m, 18 m형 판형교의 실측결과를 이용하여 타당성을 검증하였으며, 실측 및 수치해석결과는 교량의 1차 휨 고유진동수의 2.0배를 기준으로 Low pass filtering 하였다.
본 연구는 논 직파재배 인삼포에서 발생되는 월동병해의 경종적 방제기술 개발과 효과를 구명하기 위하여 실험하였던 바, 얻어진 결과를 요약하면 다음과 같다. 인삼포장의 월동기간동안에 발생하는 부패의 원인은 Botrytis cinerea 균에 의한 잿빛곰팡이병으로, 10월이나 11월에 발생되며 이듬해 2, 3월에 집중적으로 발생하는 경향을 보였다. 해가림 자재별 잿빛곰팡이병 발생은 차광지 해가림에서 6.5%, PE차광망은 16.8% 및 볏짚 해가림자재는 29.5% 순으로 발생하였고, 잿빛곰팡이병균의 감염은 월동 전에 잎에 감염되고, 이후 줄기로 2차감염이 이루어지는 것으로 나타났다. 인삼 지상부의 잿빛곰팡이병 균핵형성은 10월 20일에 26.6%, 11월 20일에 33.7%, 12월 20일에는 41.8%로 증가되는 경향이었다. 고사한 인삼의 잎과 줄기를 제거하는데 필요한 힘은 1, 2년생은 각각 0.2 kg, 0.94 kg, 3년생은 2.5 kg, 4년생 및 5년생은 5 kg의 많은 힘이 필요하였고, 월동 후에는 1 kg 내외로 쉽게 탈락되어 제거가 가능하였다. 년생별로 잎과 줄기 제거 후 병 발생율은 4, 5, 6년생에서 각각 2.5%, 1.2% 및 2.2% 의 병 발생주율을 보인 반면, 무제거시에는 8.8%, 13.0% 및 18.2%의 높은 병 발생주율을 보였다. 이식재배포장과 직파재배포장 모두 해가림자재를 걷어 놓은 경우, 두둑상면에 복토나 비닐을 피복한 경우 결주율이 감소되고, 출아본수는 증가하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.