• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1974-1981
• /
• 2004

This paper is concerned with the numerical investigation of the transfer characteristics of the landing impact force exerted on court sport shoes to the sport surface condition. The reaction force occurred by the impact between court sport shoes and sport surface is absorbed by shoes to some extent, but the remaining impact force is to transfer the human body from the sole of a foot. We consider four surface conditions, asphalt, urethane, clay and wood court surfaces. For the dynamic response analysis, we construct a coupled leg-shoes FEM model and create the multi-layered composite surface model. The numerical simulations are performed by an explicit nonlinear finite element method. Through the numerical experiments, we examine the transfer characteristics of the landing impact force to the surface condition.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.13.2-18
• /
• 1998

The purpose of this study was to investigate the attitude related to the purchasing and wearing dress shoes for Korean adult women. 480 adult women age from 18 to 86 years participated in the survey and they were recruited in Seoul and Taejeon. The results were as following; 1. The most common dress shoes sizes were 235 and 240. 2. The subjects age uder 30 years perceived that the fashion is mor important than the comfort when they purchase dress shoes. The suvjects age over 60 years preferred shoes design giving comfort than fashionably designed one. 3. The most frequent complainings with dress shoe design were narrow shoe width, the stiffness of material, and discomfortable sole shape. 4. The letter size designation of dress shoes was not fulled recognized by the consumers. The use of letter size designastion was extremely low when they purchased shoes that fit their foot.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1157-1160
• /
• 1996

Control of a biped robot which has compliant ankle joints is dealt in this paper. Simulated version of a human ankle joint is built using springs and mechanical constraints, which gives a flexibility of joint and compliance against the touching ground. The biped robot with compliant ankle joints proposed here gives a good contact between its sole and the ground and makes foot landing soft. As a result, installing force sensors for measuring the center of gravity of the biped becomes easier. A motor to drive an ankle joint is not needed which makes legs light. However, the control problem becomes more difficult because the torque of the ankle joint to put the biped in a desired walking gait cannot be provided from the compliant ankle joint. To solve this problem, we proposed a dynamic gait modification method by adjusting the position of a hip joint. Simulation results for the mathematical model of the SD-2 biped in the Ohio State University are given to show the validity of the proposed controller.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.2
• /
• pp.175-184
• /
• 2013

This study is to observe the effect of Korean medicine treatment combined with electro-acupuncture and chuna manual treatment on tarsal tunnel syndrome inpatient. The patient, diagnosed as tarsal tunnel syndrome, was treated by Korean medicine treatment in combination with electro-acupuncture and chuna manual treatment. We measured visual analogue scale(VAS). Neuropathic pain scale(NPS) was adopted as a method of measuring the treatment results of pain & hypoesthesia. Rt. sole numbness & pain decreased from VAS 10 to VAS 4. Rt. foot paresthesia decreased from VAS 10 to VAS 4 and Rt. ankle pain was disappeared. NPS score decreased from 80 to 62. Korean medicine treatment in combination with electro-acupuncture and chuna manual treatment is proved to be helpful to improve the symptoms of the tarsal tunnel syndrome patient.

• Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.9-13
• /
• 2019

We investigated the pollinators of Centipede's foot orchid (Cleisostoma scolopendrifolium) at five locations in southern Korea. Only one species of megachilid bee (Megachile yasumatsui) was observed at three of the sites (Mokpo, Haenam, and Wando). We assumed that the megachilid bee worked as a sole pollinator of C. scolopendrifolium based on the visiting behavior of the bees the attached pollinia. Fruits were observed at the three locations that bees visited: 74% fruit set at Mokpo, 59% at Wando, and 31% at Haenam. By contrast, at two of the locations where megachilid bees did not visit the plants (Naju and Jindo), there were no fruits set. The differences in fruit set rates at the three orchid populations where bees were observed appear to be related to bee abundance and flower visitation rate rather than to differences in flower abundance. The pollination interaction between C. scolopendrifolium and megachilid bees appears to involve sexual deception since only male bees were attracted to the flowers. The underlying mechanism involved in this interaction needs investigation.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.59-66
• /
• 2018

The utilized coefficient of friction (UCOF) as a ratio of the shear force to the normal force on the ground during walking is used to identify the point at which slip is likely to occur. Shoe walking will change the utilized coefficient of friction by shoe design such as sole thickness and hardness, heel shape, and outsole pattern. In this study, subjects are 21 adults (10 female, 11 male, age: $25.2{\pm}2.3yrs$, height: $165.6{\pm}7.2cm$), analysis variables were walking speed, GRF, when the UCOF is maximal, and Tangent of CoP-CoM angle, and correlation analysis with the utilized friction coefficient (UCOF). As a result, First, for the shod walking the time point which UCOF is maximum about heel strike was faster and the magnitude was larger than for barefoot walking. Second, the correlation between the tangent of CoP-CoM and UCOF of right foot was higher at the left heel striking point (UCOF2_h) which occurred in the post propulsion phase than at the right heel striking point (UCOF1_h). This suggests that the right foot UCOF is related to the braking phase of left foot( which is the propulsion phase of right foot) rather than the braking phase of right foot.

• Korean Journal of Community Nutrition
• /
• v.2 no.2
• /
• pp.179-186
• /
• 1997

A new bioelectrical impedance method has been developed and evaluated. The electrodes; were made of stainless steel and electrical interfaces were created by an upright subject gripping hand electrodes and stepping onto foot electrodes. Eight tactile electrodes were in contact with surfaces of both hands and feet; thumb, palm and fingers, front sole, and rear sole. Automatic on-off switches were used to change current pathways and to measure voltage differences for target segments. Segmental body resistances and whole body resistance(RWHOLE)were measured in 60 healthy subjects. Segmental resistances of right arm(RRA), left arm(RLA), trunk(RT), right leg(RRL) and left leg(RLL)were310.0$\pm$61.6$\Omega$, 316.9$\pm$64.6$\Omega$, 25.1$\pm$3.4$\Omega$, 236.8$\pm$31.2$\Omega$ and 237.6$\pm$30.4$\Omega$, respectively. Individual segmental impedance indexes(Ht2/RRA, Ht2/RT, and Ht2 /RLA) were closely related to lean body mass(LBM)as measured by densitometry ranged from r=0.925 to 0.960. Ht2/(RRA+RT+RLA) predicted LBM slightly better(r=0.969) than the traditional index, Ht2/RWHOLE(r=0.964), supporting the accuracy of the segmental measurement. A multiple regression equation utilizing Ht2/RRA, Ht2/RT and Ht2/RRL predicted LBM with r=0.971. Ht2/RRA term of the regression contributed to more than 40$\%$ of the LBM prediction, indicating that lean mass of arm represented whole body LBM more closely than other body segments. The new bioimpedance method was characterized by upright posture, eight tactile electrodes, segmental measurements and utilization of electronic switches in comparison with the traditional method. The measurement with this new method was extremely reproducible, quick and easy to use.

• Physical Therapy Korea
• /
• v.18 no.1
• /
• pp.18-27
• /
• 2011

This study was to investigate the positive effects of specially designed trunk-stabilization exercise program on lower extremity balance of elderly with history of leprosy. In this participants, lower extremity functions has been undermined by the development of damage in peripheral nerves. A total of 40 elderly with history of leprosy were divided into 2 groups of equal size ($n_{1,\;2}=20$): a group that participated in the exercise program, and a control group that did not exercise but did continue to engage in normal daily activities (including walking). The exercise group exercised for 60 minutes 2 days a week for 12 weeks. Static balance ability was measured by asking study participants to a one leg standing test: dynamic balancing ability was measured with a tandem walking test and a timed up-and-go test. The participants in the exercise program and the control group were tested before and after completion of the exercise program for comparison, and then divided according to their ability to feel sensory in the soles of their feet into the categories of normal sensory group: group with sensory loss in one foot: and group with sensory loss in both feet. The participants in the exercise program showed a positive, statistically significant difference in static balance compared with the control group (p<.05) as measured using the one leg standing test. Similarly, the participants in dynamic balance (p<.05) as measured using the tandem walking and timed up-and-go tests. Finally, these improvements were related to the severity of sensory loss in the soles of the feet for all study participants.

• Advances in concrete construction
• /
• v.16 no.6
• /
• pp.291-302
• /
• 2023

As the first part of the body that strikes the ground during running, sports shoes are especially important for improving performance and reducing injuries. The use of new nanotechnology materials in the shoe's sole that can affect the movement angle of the foot and the ground reaction forces during running has not been reported yet. It is important to consider the material of the sole of the shoe since it determines the long-term performance of sports shoes, including their comfort while walking, running, and jumping. Running performance can be improved by polymer foam that provides good support with low energy dissipation (low energy dissipation). Running shoes have a midsole made of ethylene propylene copolymer (EPP) foam. The mechanical properties of EPP foam are, however, low. To improve the mechanical performance of EPP, conventional mineral fillers are commonly used, but these fillers sacrifice energy return. In this study, to improve the magnificence of physical education training with nanotechnology, carbon nanotubes (CNTs) derived from recycled plastics were prepared by catalytic chemical vapor deposition and used as nucleating and reinforcing agents. As a result of the results, the physical, mechanical, and dynamic response properties of EPP foam combined with CNT and zinc oxide nanoparticles were significantly improved. When CNT was added to the nanocomposites with a weight percentage of less than 0.5 wt%, the wear resistance, physical properties, dynamic stiffness, compressive strength, and rebound properties of EPP foams were significantly improved.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.182-189
• /
• 2006

Consumers can choose suitable shoes for their feet in off-line shopping. However, in on-line shopping, because they can not wear shoes, compare to the off-line shopping, there are many problems in internet shopping. And the solution of user-oriented internet shopping is development of new type of prototype which is accessible to user and to offer visual information through 3D-virtual reality. We made this Prototype that the consumer can measure their own shoes size. And the consumer can print out their foot size in the internet database and measure their own foot size and type. And we maximized the visual experience though it is indirect and then we wanted to overcome a emotional experience in the real world. we visualized first, 'the softness' of shoes meterial, second 'the drainage' in the realtion of shoes meterial and water, third 'the close adhesion' in the realtion of shoes and consumer's their own foot and last 'the elasticity' in the relation of the shoes outer sole and surface. The result of this research can solve the problem in the existing on-line shoes' shop and it will become an alternative plan. And this prototype just will not become the localization at the on-line shoes' shop. In true sense, it will be an important example in the whole internet industry.