• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.42-52
• /
• 2017

In this modern world of drastic change, folding architecture was an alternative that offered a novel architectural insight. Today, the folding technique is being used above and beyond architecture, spreading to fashion, lighting, medicine, etc. Especially in the interior space design field, the folding technique is in the limelight as an alternative to create an original space for modern society. However, research and experiments into folding mainly remains at philosophical interpretation or architectural examples, and even these were mostly before the 2000s. Therefore, the present study determined it necessary to look deeply into the post-2000s folding technique focusing on interior space. In this paper, 33 cases of indoor space where folding technique appears are derived, and classified them again by use. The folding technique which was the first step of Sophia Vyzoviti's experiment on her book, "Folding Architecture" was extracted and used as the framework. We summarizes the range of application of folding techniques (interior space in general, floor, wall, ceiling, etc.) and major folding techniques by combining photographs, drawings, and descriptions of the works of the architects. This paper summarizes the characteristics of the space described comprehensively, and draws out the spatial characteristics of the modern interior space where the folding technique appears.

• Structural Engineering and Mechanics
• /
• v.11 no.2
• /
• pp.211-219
• /
• 2001

This paper presents the tangent stiffness method for 3-D geometrically nonlinear folding analysis of a reversal arch. Experimental tests are conducted to verify the numerical analysis. The tangent stiffness method can accurately evaluate the geometrical nonlinearity due to the element translating as a rigid body, and the method can exactly handle the large rotation of the element in space. The arch in the experiment is made from a thin flat bar, and it is found that the folding process of the arch may be captured exactly by the numerical analysis with a model consisting of only 18 elements with the same properties.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.12a
• /
• pp.185-189
• /
• 2003

최근 스마트카드에 대한 수요가 증가함에 따라 스마트카드에 대한 보안상의 문제가 대두되고 있다. 스마트카드의 안전성을 위협하는 공격 방법 중 전력공격은 가장 강력한 공격으로 많은 연구가 되고 있다. 본 논문에서는 전력분석 공격의 한 방법인 MESD 공격에 대해 알아보고 이에 대한 대응 방법으로 제안된 RSM 알고리듬에 대해 알아본다. 또한 이 알고리듬의 연산 속도 향상을 위해 folding 기법을 사용한 알고리듬에 대해서도 알아보고 MESD 공격에 안전한지를 실험을 통해 검증한다.

• BMB Reports
• /
• v.34 no.2
• /
• pp.102-108
• /
• 2001

A time-dependent folding process was used to determine whether or not protein disulfide isomerase (PDI) plays an important role in the maturation of nascent lactoferrin polypeptides. Interaction between lactoferrin and PDI was analyzed according to the co-immunoprecipitation of the two proteins. The results indicate that lactoferrin folding requires a significant interaction with PDI and its binding is relatively brief compared to other nascent polypeptides. The amount of lactoferrin interacting with PDI increases up to half a minute and sharply decreases beyond this time point. During the refolding process that follows reduction by DTT, lactoferrin polypeptides heavily interact with PDI and the interaction period was extended compared to the normal folding process. In terms of the temperature effect on PDI-lactoferrin interaction, PDI binds to lactoferrin polypeptides longer at a lower temperature (here, $25^{\circ}C$) than $37^{\circ}C$. The lactoferrin-PDI interaction was also studied in vitro. According to the in vitro experiment data, PDI was still functional in cell lysates assisting lactoferrin folding into the mature form. PDI interacts with lactoferrin polypeptides for an extended period during the folding in vitro. During the refolding process in vitro, intermolecular aggregates and refolding oligomers matured into a functional form after PDI binds to the lactoferrin. These results suggest that PDI provides a prolonged chaperoning activity in the refolding processes and that there appears to be a greater requirement for PDI chaperone activity in the refolding of lactoferrin polypeptides.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.42-55
• /
• 1985

The study is concerned with the investigation of curved line folding of developable surface from flat sheets of metal. General geometric relations among folding line, folded surface, folded angle are derived. From the derived geometric relations, the required plastic work and punch force are derived for the first approximation. Five methods of forming are suggested and the experiment is carried out using two chosen methods for the prismatic developable surfaces of which cross-sections have 103.deg.arc, 180.deg.arc, sinusoidal shape. In the die design for the tolding of prismatic developable surfaces, a stack of sheets were used to form shapes of the dies by which acceptable folded surfaces were obtained. The computed plastic work and punch force turned out to be in reasonable agreement with the experimental result.

• Journal of the Korean Chemical Society
• /
• v.58 no.6
• /
• pp.560-568
• /
• 2014

The contribution of electrostatic interactions to protein folding reaction was studied by using mutant ubiquitin with lysine to alanine mutation at residue position 29. Based on the three dimensional structure of ubiquitin, lysine 29 is located close to negatively charged glutamate 16 and aspartate 21 and considered to stabilize the native state of ubiquitin by electrostatic interactions between these residues. The equilibrium unfolding experiment showed that the native stability was decreased by about ~20% upon mutation. This observation indicates lysine 29 indeed forms electrostatic interactions with nearby residues. Folding kinetics measurements using stopped-flow device and quantitative analysis of kinetics data indicate that ubiquitin folds from unfolded state to native state via intermediate state as observed previously. This intermediate state was observed to form immediately after the initiation of folding reaction. The folding intermediate was shown to be destabilized considerably upon lysine to alanine mutation. These observations indicate that electrostatic interactions can form early stage of protein folding and hence lead the folding reaction.

• Journal of Aerospace System Engineering
• /
• v.11 no.3
• /
• pp.16-21
• /
• 2017

In this paper, we propose a new folding method (the blossom method) to increase storage efficiency of drag-sail. To resolve the issue caused by increase in the thickness of the sail, we allowed margin space (offset) along the folding line and made holes at the intersection of offset lines to prevent distortion of film. In addition, to verify applicability of the blossom method, we fabricated quarter of the sail by using Mylar film and conducted a deployment experiment. If the blossom method is applied, storage ratio (storage volume: deployed area) is 1: 68.64, that is approximately 1.88 times more than the z-fold method of folding sailing.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.9-20
• /
• 2011

Most of domestic expansion joint system was applied by exposed expansion joint system. There are cases where it is damaged by driving. As the result noise and impact happened, and the social cost due to frequent repair works is increasing. So based on the Asphalt Plug Joint(APJ) system that applied in the United States and Europe, new buried expansion joint system was lately developed a system of Buried Folding Lattice Joint(BFLJ) that changed substructure. In this research, we have tested for durability and flexibility performance of buried expansion joint system that based on the type of asphalt mixture. Also we have evaluated for durability of BFLJ system against vehicle load using accelerated pavement testing. As a result of the experiment, the developed BFLJ system gives high flexibility performance and resolves transformation concentration along the joint section more than APJ system. Also it could be seen that the BFLJ system could overcome the disadvantages of APJ and prevent early damage. Because surface deflection of BFLJ system against vehicle load was measured low, and sub system in the buried expansion joint system was not damaged against vehicle load.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.106-113
• /
• 2004

The purpose of this study is to present the dwelling space by attaching or inserting the mobile space unit to the fixed building by providing the temporary dwelling space for those suffering from flood disaster, natural disaster or solitary old people or the space and program that the completed building in the city can not provide such as temporary events in the bridge, passage space, walking space for the handicapped, stores located between street blocks, and plaza. Therefore, this study was intended to investigate temporary dwelling space through the composition of space and the experiment of the applicability of the program through the methods of movement, folding, module, expansion and evolution of mobile space. An attempt was made to apply the concept of ‘mobile space’ to the dwelling space not only with a focus on the freedom of variable and changeable physical movement but also with a focus on the existence of the nomad and the way of thinking that bleaks away from a given value system and code, creates a new value and continues to move to a new domain. This study attempted to analyze how the concept of ‘mobile space’ has been developed in what form and method they have been applied and interpreted in the historical background. It attempted to resolve the concepts of movement and mobility through the experiment so that they might apply to the space of contemporary city. This study attempted to experiment this possibility using the mobile space unit and apply it.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.535-539
• /
• 2022

This study analyzed the efficient hose loading method for indoor fire hydrants, and the experimental results are as follows. An effective fire hose loading method is to be derived through an experiment comparing the fire hose loading method of an indoor fire hydrant and the speed of fire suppression. When the fire hose was loaded by folding, it took an average of 33 seconds to load the fire hose, and for the hangyeopsal, it took an average of 69 seconds to load the fire hose, showing a significant difference. First, in the folding hose deployment experiment, subjects A, C, D, and E showed similar values from 34 seconds to 37 seconds, respectively. The reason seems to be the result of the fact that the fire hose was not twisted when unfolding, and that it was possible to deploy the hose smoothly. Subject B showed the lowest deployment time at 25 seconds, which seems to be the result of B's experience in deploying the fire hose. Second, in the hose unfolding experiment, subjects A, B, C, and E had a similar time period of 44 to 76 seconds, respectively. However, the test subject D was significantly higher at 110 seconds. The reason is that the attempt to prevent hose kinking when deploying the fire hose and the unstable psychological state through tension are judged to increase the fire hose deployment time.