• Korean journal of food and cookery science
• /
• v.20 no.4
• /
• pp.387-395
• /
• 2004

The effect of commercial Doenjangs (Korean soybean pastes) on sponge cake making was studied. When Doenjang was added to e99 foams at levels of 5, 10, 15 and 20%, there were no big differences in viscosity or stability of egg foams up to 15%, and thus in cake volume index, compared to those of control (without Doenjang). In the results of preference rank test, cake with 10% Doenjang was preferred to the other cakes. Therefore, it was decided that the addition of 10% Doenjang was suitable for sponge cake making. When seven commercial Doenjang products were used at 10%, there were differences in physical and sensory properties. The decreased viscosity of egg foams reduced their stability and so decreased the quality of the sponge cakes with low volume index and low texture scores. The use of Doenjangs improved the flavor of sponge cake and so countervailed the undesirable egg flavor. Especially, “C” Doenjang product, which increased the viscosity and stability of egg foams, produced good foaming ability and the highest physical and sensory quality, thus the higher overall acceptable scores than the control. It was probably due to its high amount of protein hydrolysate above 10-KDa. Consequently, the suitable amount of Doenjang was fixed at 10% and “C” Doenjang product was chosen as the best among the commercial products for sponge cake making.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.261-266
• /
• 2003

This study is to investigate the heating value and noxious gases generation such as CO, NO and $SO_2$ known as dangerous gas for human from specimen made of cement and lightweight aggregate. The most quanity of CO gas is generated in EPS(Expanded Poly Styrene), core of commercial sandwich panel. Although specimens mainly composed of cement discharged the relatively less CO gas than organic core such as EPS, specimens which SBR was added discharged the very much amount of CO gas similar to EPS and especially, specimens including foaming agent, gas foaming agent or redipersible powder of VA/VeoVa showed the good properties in the generation of CO gas. From the standpoint of the generation of NO and $SO_2$ gas, both the core of commercial sandwich panel such as EPS, Glass wool and specimens made with polymer dispersion such as St/BA and SBR discharge the very much amount of NO and $SO_2$ gas in comparison of the other specimens. From this study, it was confirmed that organic materials such as core of commercial sandwich panel dischared much more noxious gas than specimens composed of cement and inorganic lightweight aggregate.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.2
• /
• pp.35-40
• /
• 1993

Alkaline cleaning agent(ACA) was prepared by blending of POE(4)octadecylmine(S-204), $Na_2CO_3$, sodium orthosilicate(Na-OSi). Tetronix T-701(T-701), and MJU-100A. The physical properties of ACA tested with steel specimen showed the following results. The cleaning powers of ACA-6(S-204 80g/$Na_2CO_3$, 160g/Na-OSi, 80g/T-701, 60g/MJU-100A, 20g mixture) for press-rust preventing oil was 98% and 99% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively : for quenching oil, the cleaning power of ACA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From these results, it was ascertained that ACA-6 exhibited a good cleaning power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 3wt%. $60^{\circ}C$ were 17mm and 40mm, respectively. As the result, ACA-6 was proved a good low foaming cleaning agent.

• Composites Research
• /
• v.18 no.3
• /
• pp.47-52
• /
• 2005

Pultrusion process of phenolic foam composite is investigated. Phenolic foam composites provide heat and flame resistance with less weight. When made into foam, a variety of properties can be obtained with different bubble size and number density. In this study, effect of process variables on the foaming characteristics of phenolic resin composites during pultrusion process has been studied experimentally. The process variables considered are the heating temperature and the pulling speed as well as the mass fraction of blowing agent. Experiments were performed using a laboratory scale pultrusion apparatus. Optimal process condition was found by observing the micro-morphology.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.2
• /
• pp.95-102
• /
• 2001

Recently, there has been considerably interested in the development to new functional gemini type anionic surfactant, sodium bis-n-alkyl sulfonatosuccinate, had been synthesized through the addition reaction of sodium bisulfite to bis-n-alkyl maleate, in which water was azeotropically distilled by adding benzene to the reaction system, gave a good yield. All the surface activities including krafft point, surface tension, emulsion power and foaming were measure and cmc was evaluated in dilute solution. This results showed a lower ability in $27{\sim}30dyne/cm$ than single-chain surfactant with $32{\sim}35dyne/cm$ to surface tension. Also its cmc value much smaller in $(6.5{\sim}10){\times}10^{-4}mca{\ell}/{\ell}$ than single-chain surfactant with $(40{\sim}45){\times}10^{-4}mca{\ell}/{\ell}$ concentration. In foaming ability and foam stability of gemini surfactant had especially a good ability in approximately $100{\sim}150ml$, and in emulsing power they exhibited a good emulsing phase and stability, and Krafft points were $0{\sim}10^{\circ}C$.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.52-61
• /
• 1990

Fish protein was acylated with acetic anhydride(AA), succinic anhydride(SA) and maleic anhydride(MA) in order to improve the functional properties of the protein. The surface hydrophobicity and functional properties of protein were measured to study the relationship between them. It was found that the extented acylation of nucleophilic groups such as amino and sulfhydryl groups of the amino acid residues of fish protein was higher than other groups when acylated with AA, and the degree of acylation was 89.5 % for amino groups and 72.2 % for sulfhydryl groups. The surface hydrophobicity of fish protein was decreased by succinylation and maleylation, whereas acetylation caused tittle change. The acylated fish protein concentrate(FPC) showed higher surface hydrophobicity than the acylated fish myofibrilla protein(FMP). Acylation with AA, SA and MA of fish protein resulted in a significant increase in protein solubility, emulsifier properties, foaming properties, water adsorption capacity and oil adsorption capacity. These properties of acylated FMP were more improved than those of acylated FPC. Decrease in protein hydrophobicity was highly correlated with increase in protein solubility, and emulsifier properties and foaming properties were largely dependent on the solubility as well as surface hydrophobicity. The water adsorption capacity of the protein was significantly affected by solubility. Surface hydrophobicity had greater influence on oil adsorption capacity, whereas it had tittle effect on water adsorption capacity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.04a
• /
• pp.11-15
• /
• 1990

Results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced fly ash-cement composites are presented in this paper. The carbon fiber reinforced fly ash-cement composites using silica powder and a small amount of Ethylene vinyl acetate emulsion are prepared with carbon fiber, foaming agents and curing conditions. As a result, the manufacturing process technology of carbon fiber reinforced fly ash-cement composites is developed. And the mechanical properties such as compressive, tensile and flexural strengths and drying shrinkage of lightweight carbon fiber reinforced fly ash-cement composites are improved by using a small amount of Ethylene vinyle acetate emulsion. The development and applications of precast products and the design systems of lightweight carbon fiber reinforced fly ash-cement composites are expected in the near future.

• Journal of the East Asian Society of Dietary Life
• /
• v.3 no.2
• /
• pp.129-137
• /
• 1993

This study was attempted to determine the effect of reduction of phytate and phenol compound on the functional properties of sesame protein concentrate. The concentrates were prepared by using dist-water, HCI and butanol. The content of phytate and phenol compound in defatted sesame meal were 4.55% and 3.42% respectively. Considerable amount of phytate was reduced by using HCI, and butanol was effective in removing phenol compounds, Higher bulk density and fat absorption were found in sesame protein concentrate prepared by butanol but higher water absorption was found in the concentrate prepared by dist-water. Also, emulsifying and foaming properties were improved by butanol treatment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1362-1367
• /
• 2012

High porous silica aerogel/polyurethane polymer composite was manufactured by cross-linking polymerization of polyurethane foaming process. The properties of microstructure, mechanical strength, and thermal properties were investigated for its various applications. The superhydrophobic silica aerogel powders were used for highly thermal insulation filler materials. The thermal conductivities can be resulted 0.07 W/mK to 0.13 W/mK, by decreasing the contents of silica aerogels in composite materials. It is found that the polymerization formulation by organic binders can be applied to heavy industires, building materials, and various industries.

• Journal of Wetlands Research
• /
• v.16 no.4
• /
• pp.433-441
• /
• 2014

It has been known that sewage containing high-concentration nitrogen affects the efficiency of municipal wastewater treatment plants harmfully. Therefore, research has been actively conducted to treat sewage containing high-concentration nitrogen. The current study has analyzed organic compounds, conducted foaming tests, and operated a laboratory-level nitritation reactor with the subjects of anaerobic digester supernatant and livestock wastewater which are the typical kinds of sewage containing high-concentration nitrogen. According to the results of analyzing organic compounds, soluble inert components form the largest part of anaerobic digester supernatant while particle biodegradable components occupy the most part of livestock wastewater. About the retention time proper for the reaction of nitritation, anaerobic digester supernatant shows 2 days while livestock wastewater indicates 6 days. It seems that the difference in the proper retention time is resulted from the difference of properties in organic compounds and ammonium nitrogen concentration. In addition, livestock wastewater's reactor foam is generated comparatively more than anaerobic digester supernatant's, but it tends to be eliminated faster. It is expected that the findings of this study can be utilized as foundational data afterwards in applying the reaction of nitritation to municipal wastewater treatment plants.