• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.55-61
• /
• 2014

Fe-Cr-Al powder porous metal was manufactured by using new electro-spray process. First, ultra-fine fecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid (0.05~0.5% powders) was dispersed on Polyurethane foam through the electro-spray process. And then degreasing and sintering processes were conduced. In order to examine the effect of cell size ($200{\mu}m$, $450{\mu}m$, $500{\mu}m$) in process, pre-samples were sintered for two hours at temperature of $1450^{\circ}C$, in $H_2$ atmospheres. A 24-hour thermo gravimetric analysis test was conducted at $1000^{\circ}C$ in a 79% $N_2$ + 21% $O_2$ to investigate the high temperature oxidation behavior of powder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased with increasing cell size. In the $200{\mu}m$ porous metal with a thinner strut and larger specific surface area, the depletion of the stabilizing elements such as Al and Cr occurred more quickly during the high-temperature oxidation compared with the 450, $500{\mu}m$ porous metals.

• 폴리머
• /
• 제39권2호
• /
• pp.210-218
• /
• 2015

본 연구에서는 아민계 젤화 촉매 dimethylcyclohexyl amine(DMCHA)과 칼륨계 젤화 촉매 potassium octoate(PO)가 경질 폴리우레탄 발포체의 반응거동에 미치는 영향에 대해 연구하였다. Polymeric 4,4'-diphenyl methane diisocyanate, 폴리에스터 폴리올, 실리콘 유화제, 발포제 그리고 젤화 촉매를 사용하여 경질 폴리우레탄 발포체를 제조하였다. DMCHA 촉매의 함량이 0에서 2.0 g으로 증가함에 따라 반응 시간이 약 330초에서 약 35초로 감소하였고, 발열 반응으로 최대 반응온도는 약 217에서 약 $234^{\circ}C$로 증가하였다. PO 촉매의 함량이 0에서 2.5 g으로 증가할수록 반응 시간은 약 79초에서 약 38초로 감소함을 보였고, 특히 젤 타임, 택 프리 타임의 단축에 기여하였으며, 최대 반응온도가 약 182에서 약 $271^{\circ}C$로 증가하였다. 단열 온도 상승법을 이용하여 전환율을 구하였고, 반응식의 상수들을 계산하였다. 반응속도상수 $k_0$는 DMCHA 촉매의 양이 증가할수록 큰 값을 갖는 것을 확인하였고, PO 촉매의 경우 촉매량 증가와 큰 관계없이 유사한 값을 나타냈다.

• 접착 및 계면
• /
• 제12권3호
• /
• pp.81-87
• /
• 2011

본 연구에서는 자동차 조립공정에 적용 할 수 있는 아크릴폼테이프를 합성하기 위하여 UV 중합 및 가교 공정을 도입하였다. 중합된 점착제를 폼에 합지하고 폼의 두께를 변화시켜 가며 시험편을 제조하였다. 기본물성을 측정하기 위해 stainless steel 표면에서의 강도를 측정하였으며 이때 peel, dynamic shear and t-block을 사용하였다. 일반적인 점착제에 비해 우수한 결과를 보여 주었으며 외부 요인 - 두께, 젖음시간 - 등에 의해 물성이 크게 변화하는 것을 확인 할 수 있었다. 본 연구에 활용된 아크릴폼점착제의 자동차 공정 활용성을 평가하기 위해 다양한 플라스틱 피착제에서 물성 측정을 진행하였다. 저표면에너지그룹으로 분류되는 PP와 PE에서는 그 물성이 전혀 발현되지 못했으나 기작 차이에 의해 dynamic shear 시험에서는 일부 물성이 발현됨을 확인 할 수 있었다.

• 한국수산과학회지
• /
• 제15권4호
• /
• pp.283-290
• /
• 1982

Sardine and mackerel so called dark muscled fish have been underutilized due to the disadvantages in bloody meat color, high content of fat, and postmortem instability of protein. Recent efforts were made to overcome these defects and develope new types of product such as texturized protein concentrates and dark muscle eliminated minced fish. Approach of this study is based on the rapid dehydration of foamed fish-starch paste by dielectric heating. In process comminuted sardine meat was washed more than three times by soaking and decanting in chilled water and finally centrifuged. The meat was ground in a stone mortar added Ivith adequate amounts of salt, foaming agent, and other ingredients for aid to elasticity and foam stability. The ground meat paste was extruded in finger shape and heated in a microwave oven to give foamed, expanded, and porous solid structure by dehydration. Dielectric onstant $(\varepsilon')$ and dielect.ic loss $(\varepsilon")$ values of sardine meat paste were influenced by wavelength and moisture level. Those values at 100 KHz and 15 MHz were ranged 2.25-9.86; 2.22-4,18 for E' and 0.24-19.24; 0.16-1.20 for E", respectively, at the moisture levels of $4.2-13.8\%$. For a formula for fish-starch paste preparation, addition of $20-30\%$ starch (potato starch) to the weight of fish meat, $2-4\%$ salt, and $5-10\%$ soybean protein was adequate to yield 4-5 folds of expansion in volume when heated. Addition of e99 yolk was of benefit to micronize foam size and better crispness. In order to provide better foaming and dehydration, addition of $0.2-0.5\%$sodium bicarbonate, foaming agent, was proper to result in foam size of 0.5-0.7 mm and foam density of $200-400\;/cm^2$ which gave a good crispness. Heating time was depended upon the moisture level of fish-starch paste. For a finger shaped paste (1.0cm. $D\times10cm.L$) heating for 150-200 sec. in a microwave oven (700W. 2.45GHz) was sufficient to generate foams, expand, and solidify the porous structure of fish-starch paste. When the moisture content was above $55\%$ browning and scorching was deepened due to over-expansion and over-heating whereas the crispness was hardened by insufficient expansion at lower moisture content. In quality evaluation of the product, chemical composition of $30\%$ starch and $3\%$ salt added product was moisture $8.8\%$, lipid $2.4\%$, carbohydrate $46.7\%$, protein $36.1\%$, and ash $6.0\%$. Eleven membered panel test evaluated that fish-starch paste was acceptable in color, crisp-ness, taste, except a trace of fishy odour which could be masked by the addition of spice extracts.

• 한국건축시공학회지
• /
• 제20권3호
• /
• pp.245-252
• /
• 2020

합성수지 거푸집은 내부식성이 우수한 경량의 고밀도 폴리에틸렌(HDPE)를 재료로 사용한다. 합성수지 거푸집의 전과정 평가를 위하여 ISO FDIS 13352에서 요구하는 시스템 경계를 만족하도록 공정 흐름도를 고려하였다. 이에 따라 고려된 시스템 경계는 Cradle-to- Product shipmen이다. 고려된 시스템 경계에서 투입 에너지원, 사용재료, 운송수단, 제작공정 등으로부터 산정한 전과정 목록(LCI) 데이터베이스를 분석하였다. 합성수지 거푸집의 LCI 데이터 분석으로 부터 환경부의 환경영향평가지수 방법론에 기반하여 분류화, 정규화, 특성화 및 가중치 과정을 거쳐 환경영향평가를 수행하고, 그 결과는 유로폼의 환경영향 평가값과 비교하였다. 실험결과, 전용횟수를 고려한 CO₂ 배출량은 유로폼 대비 2배 이상의 전용성을 갖는 합성수지 거푸집이 약 32 % 가량 낮았다. 이는 합성수지 거푸집 사용은 유로폼 대비 자재 생산을 1/2로 줄일 수 있으며, CO₂ 배출량 저감으로 이어질 수 있다.

• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.60-66
• /
• 2012

본 연구에서는 건설현장 등에서 주로 사용되는 용접 절단기의 작업시 화재위험성을 평가하였다. 실험에는 인버터 AC/DC TIG 용접기와 인버터 에어프리즈마 절단기가 사용되었다. 용접 절단 작업시 비산되는 불티의 온도를 측정하였다. 작업높이와 입력전류의 변화에 따라 비산된 불티의 크기 및 비산범위를 측정하였다. 또한, 용접 절단기 화재원인 중 가장 높은 비율을 차지하는 가연물 근접방치에 의한 화재위험성을 평가하였다. 가연물로는 건초, 방진막, 우레탄폼, 비닐, 종이, 유류가 사용되었다. 용접 절단 작업시 불티의 온도가 최대 $450^{\circ}C$까지 상승하였다. 2.5 m 높이에서 절단 작업시 불티가 최대 4.7 m까지 비산되었다. 용접 절단 작업시 주위에 가연물이 존재할 경우 비산된 불티에 의해 가연물에 착화되어 화재로 발전할 가능성이 매우 높다.

• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.219-230
• /
• 2004

Most of the low-level liquid radioactive wastes generated from PWR plants are classified into high or low total suspended solid(HTDS or LTDS), and into radiochemical and radioactive laundry waste. Although the evaporation process has a high decontami- nation ability, it has several problems such as corrosion, foam, and congestion. A new liquid waste disposal process using the ion-exchange demineralizer(IED), instead of the current evaporation process, has been introduced into the Yonggwang NPP #5 and 6. These two methods have been compared to understand the differences in this study. Aspects compared here were the released radioactivity amount of the liquid radioactive wastes, the dose of off-site residents, the decontamination factor, and the amount of the solid radioactive wastes. The IED system is designed to discharge higher radioactivity about 20% than the evaporating system, and the actual radioactivity released from the evaporating and IED system were 0.473mCi and 1.098mCi, respectively. The radioactivity released from the IED was 2.32 times higher than that of the evaporating system. The dose of off-site residents was $2.97{\times}10^{-6}$mSv for the evaporating system, and $6.47{\times}10^{-6}$mSv for IED. The decontamination factor(DF) of the evaporator is, in most cases, far lower than the lower limits of detection(LLD) with the Ge-Li detector. Due to the low concentration of the liquid wastes collected from the liquid waste system, the decontamination factor of IED is very low. Since there is not enough data on the amount of solid radioactive wastes generated by the evaporation system, the comparison on these two systems has been conducted on the basis of the design, and the comparison result was that the evaporating system generated more wastes about 40% than IED.

• Journal of Microbiology
• /
• 제37권2호
• /
• pp.66-72
• /
• 1999

Mycolic acid-containing actinomycetes associated with extensive foaming in the aeration basin of the activated sludge process were isolated and analyzed by phenotypical, chemotaxonomical and phylogenetic methods. Whole cell sugar patterns of two isolates were pattern A. The nearly complete sequences of the 16S rRNA genes (rDNAs) of the isolates were determined and compared by using several tree-making algorithms. With polyphasic methods, strain SCNU1 was identified as Gordona sputi, and strain SCNU5 assigned to the genus Tsukamurella. The presence of opportunistic pathogens of chronic lung infections within foams can cause public health problems and render waste-treatment processes inefficient.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3177-3183
• /
• 2012

The carbon nanofibers (CNFs) used in this study were synthesized with an iron catalyst and ethylene as a carbon source. A concentration of 30 wt % iron(III) acetylacetonate was dissolved in resol type phenol resin and polyurethane foam was put into the solution. The sample was calendered after being cured at $80^{\circ}C$ in air for 24 h. Stabilization and carbonization of the resol type phenol resin and reduction of the $Fe^{3+}$ were completed in a high-temperature furnace by the following steps: 1) heating to $600^{\circ}C$ at a rate of $10^{\circ}C/min$ with a mixture of $H_2/N_2$ for 4 h to reduce the $Fe^{3+}$ to Fe; 2) heating to $1000^{\circ}C$ in $N_2$ at a rate $10^{\circ}C/min$ for 30 minutes for pyrolysis; 3) synthesizing CNFs in a mixture of 20.1% ethylene and $H_2/N_2$ at $700^{\circ}C$ for 2 h using a CVD process. Finally, the structural characterization of the CNFs was performed by scanning electron microscopy and a synthesis analysis was carried out using energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Specific surface area analysis of the CNFs was also performed by $N_2$-sorption.

• KSBB Journal
• /
• 제27권4호
• /
• pp.207-214
• /
• 2012

Emulsions are mixture of immiscible liquids in which one is dispersed in all over the other. They have been applied to many applications including cosmetics, foods, drug delivery system (DDS), fine chemicals, and chemical separations. Especially, emulsion technology is one of the most useful technique to formulate cosmetics such as eye cream, foundation, and foam cleansing. In general, the emulsions can be generated by mechanical agitation of two immiscible fluids. However, the emulsions obtained by conventional method have limited in stability, monodispersity, and complicate process. We describe here preparation techniques of representative cosmetic emulsions such as liposome, liquid crystal emulsion, nanoemulsion, multiple emulsion, and pickering emulsion. Furthermore, various factors which can control the physical properties of each cosmetic emulsions are briefly discussed.