• 원예과학기술지
• /
• 제34권3호
• /
• pp.414-423
• /
• 2016

본 연구는 환경오염 감소와 암면 배지의 대체를 위해 새롭게 개발된 생육배지인 phenolic foam의 토마토 육묘용 배지로써의 이용가능성을 구명하기 위해 수행되었다. 토마토 'Madison' 품종을 4종류의 펠릿형 Grodan rockwool(GRW), UR rockwool(URW), phenolic foam LC(LC), phenolic foam LC-lite(LC-lite) 인공배지에 파종하여 육묘 후 19일 후에 4종류의 큐브형 인공배지에 이식하였다. 종자는 식물생장 챔버에($25{\pm}2^{\circ}C$, 상대습도 $90{\pm}5%$, 암발아) 4일 동안 발아시켰고, 발아가 시작 된 후에는 유리온실로 옮겨 두상 관수로 양액을 관수하였다. 토마토의 초장, 엽수, 엽면적, 생체중 및 건물중은 LC-lite 펠릿에서 육묘한 후 URW 큐브로 이식한 묘에서 생육이 우수하였다. 뿌리 등급은 LC 펠릿에서 육묘 후 LC와 LC-lite 큐브로 이식한 처리에서 가장 우수하였다. 배지의 화학성은 모든 배지에서 토마토의 생육에 안정적인 범위였다. URW의 물리성은 용기 용수량, 기상률, 총 공극에서 높은 값을 나타냈다. 그러므로, 신개발 배지인 phenolic foam은 토마토 묘의 초기 육묘와 뿌리 발달에 적합하여 암면 대체 가능성을 입증하였다.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.37-44
• /
• 2006

Solvent-free low foaming scouring agents (LFSC) were prepared by blending of 2-ethylhexylaminoethyl sulfate (2-EHAS), POE(10) octadecylbenzyl- ammonium chloride (POBAC) and Sedlan FF-200 (FF-200). As the results of several tests, 2-EHAS/POBAC/FF-200/water (8g/12g/20g/60g) mixture (LFSC-5) showed good cleaning power, penetrating ability and stability to alkali, and gave less problem in water pollution. The foaming power of LFSC-5 measured by Ross and Miles method was 8mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 18mm at $80^{\circ}C$. As a result, LFSC-5 proved a good low foaming scouring agent for fiber.

• 한국응용과학기술학회지
• /
• 제21권2호
• /
• pp.156-163
• /
• 2004

Low foaming scouring agents (LSSA) were prepared by blending of amine salt of dodecylbenzene sulfone, poly (PO-b-EO) glycol, Newpol PP-2000, MJU-100, ethylene glycol and organic solvent. As the results of several tests, LSSA-2 showed good scouring effect, penetrating ability and emulsifiability, and showed not much water pollution. The foaming power of LSSA-2 measured by Ross & Miles method was 11mm foam height immediately after foaming. And the foaming power of LSSA-2 measured by Ross & Clark method were less than 310mm foam height at $30^{\circ}C$, 17mm at $80^{\circ}C$. As a result, LSSA-2 was proved as a good foaming scouring agent.

• 공업화학
• /
• 제4권2호
• /
• pp.358-364
• /
• 1993

2-Ethylhexylaminoethyl sulfate, Na-dioctyl sulfosuccinate, Newpol PP-2000, MJU-100, 에틸렌글리콜 및 유기용제 등을 블렌딩하여 저기포성 정련제(SLFS)를 제조하였다. SLFS로서 여러가지 물성시험을 해 본 결과, SLFS-2는 정련효과, 침투력, 유화력, 내알칼리성 등이 양호하였으며, 수질오염에 대한 영향이 크지 않았다. 또한 SLFS-2는 Ross & Miles법에 의한 거품생성 직후의 기포력이 포고 8mm로 나타났고, Ross & Clark법에 의한 기포력이 $30^{\circ}C$에서는 포고 300mm 이하로, $80^{\circ}C$에서는 15mm를 각각 나타내어 양호한 저기포성 정련제임이 입증되었다.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.306-312
• /
• 2004

An acid cleaning agent (AACA) for aluminum was prepared by blending of sorbitol, n-octanoic acid, MJU-100A, Tetronix T-701, PPA-23, C8-83 and phosphoric acid. With the prepared AACA, degreasing, foam height, etching and derusting tests were carried out. As a result, AACA-4 and AACA-7 showed better cleaning ability than commercial acid cleaning agents.

• 한국농공학회논문집
• /
• 제56권1호
• /
• pp.81-88
• /
• 2014

Accurate wind data is essential for predicting airborne spread of virus. OpenFOAM was used for computational fluid dynamics (CFD) simulation procedure which is under GNU GPL (General Public License). Using complex terrain, DEM (Digital Elevation Map) that was prepared from GIS information covering a research site is converted to a three dimensional surface mesh that is composed by quad and full hexahedral space meshes. Around this surface mesh, an extended computational domain volume was designed. Atmospheric flow boundary conditions were used at inlet and roughness height and was considered at terrain by using rough wall function. Two different wind conditions that was relatively stable during certain periods were compared in 3 different locations for validating the accuracy of the CFD computed solution. The result shows about 10 % of difference between the calculated result and measured data. This procedure can simulate a prediction of time-series data for airborne virus spread that can be used to make a web-based forecasting system of airborne virus spread.

• 한국식품조리과학회지
• /
• 제24권4호
• /
• pp.473-479
• /
• 2008

The principal objective of this study was to evaluate the sensory properties and physical characteristics of muffins produced using different fats(butter, grape seed oil) and mixing methods(Creaming method, Foam method, Single-stage method). The muffins weighed between $63.25{\sim}64.50$ g and were $5.77{\sim}6.42$ cm in height. In a texture analyzer test, muffins prepared via the single-stage method with butter evidenced the highest hardness, gumminess, and chewiness values among the five kinds of muffin prepared in these experiments. The springiness value was highest in the muffin prepared via the foam method with grape seed oil. In the sensory evaluation, we detected no significant differences among the muffins in terms of flavor($4.76{\sim}5.24$), taste($4.65{\sim}5.29$), softness ($4.65{\sim}5.41$), and overall acceptability ($4.47{\sim}5.29$). In the chemical composition analysis, moisture and crude protein contents were found to be higher in the control group(p<0.05) than in the muffin prepared via the foam method with grape seed oil(p<0.01). We noted no significant differences among the muffins in terms of crude lipids or crude ash content.

• Steel and Composite Structures
• /
• 제16권3호
• /
• pp.325-337
• /
• 2014

The strength and buckling problem of a five layer sandwich beam under axial compression or bending is presented. Two faces of the beam are thin aluminium sheets and the core is made of aluminium foam. Between the faces and the core there are two thin binding glue layers. In the paper a mathematical model of the field of displacements, which includes a share effect and a bending moment, is presented. The system of partial differential equations of equilibrium for the five layer sandwich beam is derived on the basis of the principle of stationary total potential energy. The equations are analytically solved and the critical load is obtained. For comparison reasons a finite element model of the beam is formulated. For the case of bended beam the static analysis has been performed to obtain the stress distribution across the height of the beam. For the axially compressed beam the buckling analysis was carried out to determine the buckling load and buckling shape. Moreover, experimental investigations are carried out for two beams. The comparison of the results obtained in the analytical and numerical (FEM) analysis is shown in graphs and figures. The main aim of the paper is to present an analytical model of the five layer beam and to compare the results of the theoretical, numerical and experimental analyses.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.78-84
• /
• 2016

In this paper, turbulence models for considering roughness in the open source code(OpenFOAM) was investigated. Wall function in the RANS(Reynolds-averaged Navier - Stokes) turbulence model was modified considering roughness on the flat plate by using roughness function. Correlation between the first layer height in the CFD model and roughness height of the plate was observed, and the most proper roughness function, and the first layer height from the plate wall in the CFD analysis was suggested in this paper.

• Environmental Analysis Health and Toxicology
• /
• 제23권3호
• /
• pp.201-211
• /
• 2008

This study was performed to find the atmospheric concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) at four different heights (l0, 50, 150 and 1,500 cm) using low volume polyurethane foam (PUF) plug air sampler in semi-rural area. ${\alpha}-/{\beta}-/{\gamma}-HCH$ with low molecular weights and Koa (octanol-air partitioning coefficient) in OCPs were similarly high concentrations at all heights, but the other OCPs (p,p'-DDE, p,p'-DDD, p,p'-DDT, Heptachlor epoxide, ${\gamma}$-CHL, ${\alpha}$-CHL, Trans-nonachlor) with high molecular weights and Koa decreased with increasing heights. However, the concentrations of PCBs increased with increasing height.