• Composites Research
• /
• v.29 no.4
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF) as a representative polymer with the piezoelectric property has been studied since the 1960s. Crystalline structure of poly(vinylidene fluoride) polymer is composed of five different crystal structure of the polymer as a semi-crystalline. Among the various crystal structures, ${\beta}-type$ crystal exhibits a piezoelectricity because the permanent dipoles are aligned in one direction. Generally ${\beta}-form$ crystal structure can be obtained through the transformation of the ${\alpha}-form$ crystal structure by the stretching and it can increase the amount through the after treatment as poling process after stretching. ${\beta}-form$ crystal structure the PVDF fibers produced by wet spinning is formed through a diffusion mechanism of a polar solvent in the coagulation bath. However, it has a disadvantage that the diffusion path of the solvent remains as pores in the fiber because the fiber solidification occurs simultaneously with the diffusion of the polar solvent. These pores play a role in reducing effect of poling process owing to effect of disturbances acting on the polarization by the electric field. In this work, the drying method using the microwave was introduced to remove more effectively the residual solvent and the pore within PVDF fibers produced through wet-spinning process and piezoelectric PVDF fibers was produced by transformation of the remaining ${\alpha}$ form crystal structure into ${\beta}-crystal$ structure through the stretching process.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.605-609
• /
• 2011

Composite nanofibers were prepared by electrospinning and thermal treatment from poly (vinylidene fluoride) (PVDF)-$SiO_2$ blend solution. The nanofibers were stacked on layers to produce fully interconnected pores. TEM micrographs and EDX spectra confirmed the presence of $SiO_2$ in the composite nanofibers. The porosity of nanofibers was effectively enhanced by the introduction of electrospinning technique. ATR-FTIR and XRD results revealed that PVDF in the composite nanofibers exhibited the mixture crystal structure of ${\alpha}$-phase and ${\beta}$-phase. The crystal structure of ${\alpha}$-phase and crystallinity increased by the thermal treatment. In addition, the mechanical properties, thermal stability and hydrophobicity were markedly amplified by the thermal treatment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.16-23
• /
• 2016

Purpose: The aim of this study was to evaluate whether fluorides at various pH cause changes in the surface roughness of titanium implants that alter the adherence of bacterial biofilms. Materials and Methods: The titanium disks were assigned randomly to the following seven groups according to the fluoride agents and application time (1 minute or 30 minute) used: control (no treatment); group 1 (1.23% acidulated phosphate fluoride [APF] at pH 3.5 for 1 minute); group 2 (1.23% APF at pH 3.5 for 30 minute); group 3 (1.23% APF at pH 4.0 for 1 minute); group 4 (1.23% APF at pH 4.0 for 30 minute); group 5 (2% NaF gel at pH 7.0 for 1 minute); group 6 (2% NaF gel at pH 7.0 for 30 minute). The surface roughness of the titanium disks and the amount of adherent bacteria were measured. Results: Group 2 showed a significantly greater surface roughness than the control group (P < 0.0001). No significant differences in the amount of surface bacteria were observed between the treated samples and the controls. In addition, there were no significant differences in bacterial adherence relative to the incubation period between the treated samples and the controls. Conclusion: The surface roughness of the titanium disks was significantly greater after treatment with APF at pH 3.5 for 30 min compared with that of the controls. In addition, we found that the amount of Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibactor actinomycetemcomitans was similar among all groups

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.855-859
• /
• 2011

The main pollutants from zirconium alloy tubing manufacturing process in nuclear industry are nitrate ($NO_3-N$) and fluoride (F-)Nitric acid, and hydrofluoric acid is used for acid pickling. The process for the removal of nitrate and fluoride is composed of 1st chemical coagulation, SOD (Sulfur Oxidation Denitrification) process using sulfur-oxidizing denitrification, and 2nd chemical coagulation. The characteristic of the wastewater treatment is an application of SOD process. The SOD Process is highly received attention because it is significantly different from existing processes for sulfur denitrification. A JSC (JeonTech-Sulfur- Calcium) Pellet is unification of sulfur and alkalinity material. According to result of SOD process in wastewater treatment plant, the removal efficiency of T-N was over 91% and the average concentration of T-N from influent was 147.55 mg T-N/L and that from effluent was 12.72 mg T-N/L. Therefore, SOD process is a useful to remove nitrogen from inorganic industrial wastewater and a new development of microbial activator was shown to be stable for activation of autotrophic bacteria.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.3
• /
• pp.293-300
• /
• 2019

As a common side effect of fixed orthodontic treatment, demineralization of the enamel adjacent to the bracket and band occurs in patients with poor oral hygiene. The purpose of this study was to investigate what is the most effective method to prevent demineralization around the fixed orthodontic appliance among various methods using fluoride. 80 extracted bovine incisors with a healthy surface were classified into four groups as experimental materials: (Group I) Control group, (Group II) V $varnish^{TM}$, (Group III) Tooth Mousse $Plus^{(R)}$, (Group IV) $Vanish^{TM}$ XT. After treatment for each group, mineral loss and Vickers surface microhardness were measured at 0, 30, 60 and 90 days after demineralization in artificial carious solution. Mineral loss was the lowest in group IV, followed by group II and group III, which showed a significant difference. The surface microhardness was the lowest in group IV, followed by group II and group III, which showed a significant difference. Through this study, group IV showed the best effect to prevent enamel demineralization around the bracket. Group III showed significant prevention of enamel demineralization compared with the control group, but the effect was less than that of the other groups.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.123.2-123.2
• /
• 2016

Mg alloys have been developed for automobile and mobile equipments because of their low density of $1.7g/cm^3$. One of the main problems of Mg alloys is their poor corrosion resistance which has limited their wide applications. Plasma electrolytic oxidation (PEO) method is one of the promising surface treatment methods for Mg alloys. In this presentation, experimental data about the effects of solution composition and form of current are presented and discussed in view of dielectric breakdown and reformation of PEO films The role of various anions of phosphate, silicate, fluoride, carbonate and hydroxide ions is discussed in view of film breakdown and reformation of PEO films.

• Journal of Yeungnam Medical Science
• /
• v.16 no.2
• /
• pp.155-168
• /
• 1999

Osteoporosis is one of the most important public health problems facing the aging population. Drug therapy for osteoporosis can be divided operationally into two main categories: drugs that inhibit bone resorption, and thus reduce bone turnover, and those that stimulate bone formation, exerting an anabolic effect. Antiresorptive agents such as estrogens, calcitonin, and bisphosphonates are most effective in the prevention of osteoporosis. Formation-stimulating agents such as sodium fluoride or monofluorophosphate, parathyroid hormone fragments, and anabolic steroids are of potential value in the treatment of established osteoporosis, where bone mass is already low and benefit from antiresorptive drugs is likely to be small Recently, raloxifene, a selective estrogen receptor modulator, has become available in various countries for clinical use in the treatment of involutional osteoporsis. This paper will review the use of these drugs in postmenopausal woman.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.196-204
• /
• 1994

The purpose of this clinical trial was to study the effectiveness of 5% potassium nitrate dentifrice as a daily home treatment of dentinal hypersensitivity. Thirty subjects with dentinal hypersensitivity were included in a 4-week, double-blind, parallel, comparative study. Stimuli used included mechanical, cold water and compressed air blasts. A subjective assessment of the degree of hypersensitivity for each stimulus was recorded. The results indicated that 5% potassium nitrate dentifrice, in comparision with a conventional fluoride dentifrice, reduced dentinal hypersensitivity to a significant degree. The therapeutic response to potassium nitrate was apparent within 2 weeks and increased continuously for the length of the study period. We conclude that 5% potassium nitrate dentifrice is an effective agent for the daily home treatment of dentinal hypersensitivity.

• BMB Reports
• /
• v.28 no.6
• /
• pp.552-555
• /
• 1995

Treatment of microsomal vesicles isolated from etiolated Pisum sativum L cv. Alaska epicotyl tissue with agents inhibiting protein dephosphorylation, namely NaF and/or ATP, resulted in increased binding of the phytotropin NPA to the putative auxin efflux carriers localized on the plasma membrane. The phytotropin effect was especially conspicuous if the vesicles were simultaneously treated with Triton X-100. Kinetic analysis of the binding indicated the existance of two distinct sites for NPA, each having different affinities. Increased binding of the phytotropin to the membrane where protein dephosphorylation was inhibited was attributable to the increased ligand affinity of both sites. Treatment of tissue segments with flubride was found to enhance in vivo auxin transport. Implications of covalent modification of the auxin efflux carrier complex for the regulation of membrane transport of auxin molecules are discussed.

• Membrane Journal
• /
• v.27 no.1
• /
• pp.68-76
• /
• 2017

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, non-toxicity, and incombustibility. The spiral wound module was manufactured with the flat membrane and a woven paper. Hybrid water treatment process was composed of the PVdF nanofibers spiral wound microfiltration and granular activated carbon (GAC) adsorption column. Effect of GAC packing mass was investigated by comparing the case of recycling or discharging the treated water using the synthetic solution of kaolin and humic acid. After each filtration experiment, water back-washing was performed, and recovery rate and filtration resistances were calculated. Also, effect of GAC adsorption was compared by measuring turbidity and $UV_{254}$ absorbance. As a result, there was no effect of GAC packing mass on turbidity treatment rate; however, the treatment rate of $UV_{254}$ absorbance was 0.7~3.6% for recycling the treated water, and increased to 3.2-5.7% for discharging the treated water. In the case of recycling the treated water, reversible filtration resistance ($R_r$) and irreversible filtration resistance ($R_{ir}$) trended to decrease as increasing GAC packing mass; however, total fitration resistance ($R_t$) was almost constant, and recovery rate of water back-washing trended to increase a little.