• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.767-775
• /
• 2011

In this study we verified if the electro-coagulation process can treat properly the nitrate and fluoride that are not removed well in the conventional small water treatment plants which usually employ chlorination and filtration only. As we gave a change of electrode material and gap-distance between electrodes, removal efficiency of the nitrate and fluoride was determined by electro-coagulation process which were equipped with aluminum and stainless steel (SUS304) electrodes. In addition, electrode durability was investigated by determination of electrodes mass change during the repetitive experiments. Removal efficiency was great when aluminum was used as an anode material. Nitrate removals increased as electric density and number of electrodes increased, but fluoride removal was less sensitive to both parameters than nitrate. After 10 minutes of contact time with the current density from $1{\times}10^{-3}$ to $3{\times}10^{-3}A/cm^{2}$, nitrate and fluoride concentration ranged from 9.2 to 1.2mg/L and from 0.02 to 0.01mg/L, which satisfied the regulation limits. Regardless of the repeating number of experiments, removal efficiency of both ions were almost similar and the change of electrode mass ranged within ${\pm}$0.5%, indicating that the loss of the electrode mass is not so much great under the limited circumstances.

• Environmental Analysis Health and Toxicology
• /
• v.13 no.1_2
• /
• pp.19-26
• /
• 1998

In Korea, fluoride was first introduced into the drinking water of residents of Jinhae, KyungNam in 1981 for the prevention of dental caries. Ever since, growing numbers of communities favor fluoridation. The mechanism of F prevention of tooth decay is well known: fluoride ions substitute for hydroxyl ions in hydroxyapatite of hard tissues, which result in crystal perfection, with consequent reduction in dental caries. Soluble fluorides such as sodium fluoride are almost completely absorbed from the gastrointestinal tract. However, the presence of divalent or trivalent cations such as aluminum, magnesium, and calcium that can complex with F can reduce the degree of absorption. In U.S.A., over 7000 communities are now adding F to their drinking water. However, some portion of population oppose fluoridation, voicing both concern about the safety of fluoridation as well as for personal choice. Thus, This paper reviews the interaction of fluoride and cations as well as fluoride and suggests possible problems associated with fluoridation, a controversial issue.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1931-1938
• /
• 2021

Uranium ingot is produced by metallothermic reduction of uranium tetrafluoride using magnesium or calcium as reductant. Presence of oxygen containing compounds viz. uranyl fluoride and uranium oxide in the starting uranium fluoride has a significant effect on the firing time, final temperature of the charge, slag-metal separation and hence the metal recovery. As reported in the literature, the maximum tolerable limit for uranyl fluoride in the UF₄ is 2.5 wt% and limit for uranium oxide content is in the range 2-3 wt%. No theoretical or experimental basis is available till date for these limits. Analyses have been carried out in this study to understand the effect of UO₂F₂ concentration in the starting fluoride on the final temperature of the products and thus the reduction characteristics. UF₄ having uranyl fluoride concentration, less than as well as more than 2.5 wt%, have been investigated. Thermodynamic calculations have been carried out to arrive at a general expression for the final temperature attained by the products during calciothermic reduction of UF₄. Finally, an upper limit for the oxygen containing impurities has been estimated using the CaO-CaF₂ phase diagram.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.3
• /
• pp.14-22
• /
• 2024

This study established risk-based fluoride soil contamination standards according to the Korean Soil Contaminant Risk Assessment Guidelines (SRAG). Ten exposure scenarios were evaluated, broadly categorized into Scenario 1, which used the default parameters from the current SRAG, and Scenario 2, which used the latest exposure factors and bio-concentration factors. Fluoride soil standards corresponding to a total hazard index (HI) of 1.0 were determined for each scenario. For children in agricultural areas, the derived risk-based soil fluoride standard was 70 mg/kg for Scenario 1 and 27 mg/kg for Scenario 2. In industrial areas, the risk-based fluoride soil standard was 2200 mg/kg in Scenario 1 and 2300 mg/kg in Scenario 2. This study clearly demonstrated that the crop ingestion exposure pathway exerted predominent influence on the estimated human health risk standards. Additionally, using the Added Risk Approach and considering soil background concentrations, the total fluoride soil standards for residential areas ranged from 232 mg/kg to 444 mg/kg, while the standards for industrial areas ranged from 2405 mg/kg to 2674 mg/kg.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.159-165
• /
• 2001

Fluoride has been used widely for the prevention of dental caries. Many dental professionals applicated acidulated phosphate fluoride(APF) gel for the purpose of prevention of dental caries in recent years. However, the topical application of fluoride varnish is growing and getting much recognition in many parts of Europe and Scandinavia. The main purpose of this study was to compare the effect of fluoride varnish and acidulated phosphate fluoride gel on artificial caries lesion. The artificial caries lesion was caused on the sound bovine enamel and divided 60 specimens into three groups each containing twenty for the purpose of study. No application was done on group 1, which acted as control group. Group 2 was treated with the topical application of fluoride varnish and removed after 1 hour Group 3 was treated with APF gel and removed after a minute. The cycle of remineralization/demineralization went on in vitro and the microhardness was measured for the each group after 5 and 15days. The following results were obtained : 1. According to the results after 5 days, the microhardness of groups 2 and 3 were significantly higher than group 1, the control group(p<0.05) Similar results was also noticed after 15 days(p<0.05) 2. In comparison of microhardness between groups 2 and 3 after 5days, there were no significant differences between them. The results after 15 days was also similar 3. Much difference in microhardness wasn't present in groups 2 and 3 after 5 and 15days. However, the microhardness of the group 1 dropped significantly in the result of 15 days and 5 days(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.25-34
• /
• 2006

Fluoride released from dental restorative materials effectively declines the incidence and activity of dental caries and inhibits tooth demineralization. This study investigated the fluoride release and uptake characteristics of one composite resin $(Z-250^{TM})$ three glass ionomer-based restorative material ($Dyract^{(R)}$ AP, Fuji II $LC^{(R)}$, Fuji IX GP $Fast^{(R)}$) Forty discs(6mm diameter and 1mm height) were prepared for each material. Each disc was immersed in 5ml of distilled water within polyethylene vial and stored at $37^{\circ}C$. The distilled water was changed every 24 hours and the release of fluoride was measured for 31 days. At the end of this period, each specimen was subjected to one of four treatments : (A) no fluoride treatment (control), (B) application of a fluoride dentifrice (500ppm) for three minutes three times; (C) application of the 1.23% acidulated phosphate fluoride(APF) foam for one minute once, (D) the same regimen as (B), plus application of the APF foam for one minute once. Then, all samples were reassessed for an additional 7 days. For all samples, the greatest fluoride release was observed after the first day of the study but diminished with time. On the 7th day of the study, fluoride release level was stabilized. Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$ released higher amount of fluoride than other materials ; however, no statistically significant difference was found from Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$. The amount of fluoride of $Dyract^{(R)}$ AP, Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$ was increased after fluoride treatment, and diminished with time.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.909-914
• /
• 2007

Fluorine compounds are the essential chemicals for wet processes of semiconductor and LCD production line. Problems of conventional treatments for fluoride wastewater are their high operation costs and low fluoride removal capacity. In this study, cement paste containing various Ca-bearing hydrates such as portlandite, calcium silicate hydrate(CSH), and ettringite was investigated for fluoride removal. The objectives of this study are to assess the feasibility of using cement paste cured mixture of cement and water as an alternative agent for treatment of fluoride wastewater and to investigate fluoride removal capacity of the cement paste. The performance of cement paste was comparable to that of lime in the kinetic test. In column experiment where the effluent fluoride concentrations were below 0.5 mg/L. Then the leached calcium reached the maximum level of 800 mg/L. The nitrate reduced to the level of less than 10 mg/L. Nitrate in the wastewater was exchanged with interlayer sulfate of these cement hydrate LDHs. Phosphate concentration could be reduced to 10 mg/L by forming calcium phosphate. These results indicate that the cement paste generally has advantageous characteristics as an economical and viable substitute for lime to remove fluoride.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.367-376
• /
• 2009

In this clinical research, the fluoride tape(SCMC-T-5) using fluoride(NaF) was developed and manufactured and the treatment effect of the fluoride tape in dentin hypersensitivity patients was evaluated and compared with the effect of existing fluoride varnish($CavityShield^{TM}$). Twenty two healthy adult patients(88 teeth) having dentin hypersensitivity participated in this clinical research and they were divided into two groups. The fluoride product was applied according to the manufacturer's instruction and the level of pain in the tooth after giving irritation using compressed air and ice stick was measured just after the application, after 3 days, after a week and after 4 weeks each using visual analog scale(VAS). In the experimental group, compared with the early VAS scores, all other VAS scores showed the significant decreases statistically. In the control group, all VAS scores except the VAS score of 34.091(air) measured 3 days after(using the irritation examination by the compressed air) showed the significant decreases statistically when compared with the early VAS scores. The fluoride tape and fluoride varnish used in this clinical research were able to treat the dentin hypersensitivity effectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.4
• /
• pp.397-405
• /
• 2020

The aim of this study is to compare cariogenic characteristics of fluoride-sensitive Streptococcus mutans [fluoride-sensitive (FS) S. mutans ] and fluoride-resistant Streptococcus mutans [fluoride-resistant (FR) S. mutans] in the presence of sucrose, and to evaluate its effect on cariogenic biofilm formation. S. mutans ATCC 25175 was continuously cultured in trypticase soy broth (TSB) containing NaF (70 ppm) for 40 days to generate FR S. mutans. FS and FR S. mutans were inoculated in TSB with or without 2% sucrose, and optical density and pH were measured every hour. An oral biofilm was formed using saliva bacteria and analyzed through confocal laser scanning microscopy and CFU count. Finally, the expression of glucosyltransferases genes of both S. mutans was investigated through RT-PCR. FR S. mutans exhibited slower growth and lower acidogenicity in the presence of sucrose compared to FS S. mutans . Both cariogenic and single species biofilm formation was lower in the presence of FR S. mutans, along with reduced number of bacteria. FR S. mutans showed significantly low levels of gtfB, gtfC, and gtfD expression compared to FS S. mutans . On the basis of results, FR S. mutans may be less virulent in the induction of dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.428-435
• /
• 1997

For the purpose of investigating the continuous fluoride releasing from acrylic resin using removable appliances by incorporating fluoride into polymethylmethacrylate during the construction of the appliances, two kinds of fluoride were blended with acrylic powder and devided into five groups as follows. Group 1 : no fluoride (control) Group 2 : NaF 5 wt% Group 3 : NaF 10 wt% Group 4 : $CaF_2$ 5 wt% Group 5 : $CaF_2$ 10 wt% Resin specimens were tested in vitro for fluoride release with fluoride electrode and flexural strength with Instron. The results were as follows ; 1. After 24 hrs, released fluoride concentration(ppm) was the most in group 3($126.5{\pm}14.15$) then, next, group 2($49.5{\pm}4.92$), group 5($2.67{\pm}1.08$), group 4($0.81{\pm}0.30$), group 1($0.03{\pm}0.01$) in order, but after 28 days, group 3($3.37{\pm}0.31$), group 5($1.25{\pm}0.25$), group 4($0.74{\pm}0.19$), group 2($0.68{\pm}0.07$), group 1($0.03{\pm}0.01$). 2. Fluoride releasing of NaF groups were faster and more amount than $CaF_2$ groups initially but decreased significantly, later. 3. Flexural strength ($kg/cm^2$) was the biggest in group 1($602.90{\pm}69.32$), and then group 4($568.98{\pm}20.16$), group 5($556.19{\pm}5.26$), group 2($536.12{\pm}30.35$), group 3($508.44{\pm}26.16$) in order, the differences between control group and NaF groups were statistically significant (p<0.05).