• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.51-55
• /
• 2013

In this work, a new fluorescence emission measurement technology was introduced and experimentally compared with other measurement methods, such as the titration method and IR spectroscopy, to validate it for the oil oxidation measurement of electrical insulating oil. The oxidation characteristics of insulating oil were found to be fairly represented by the titration method and IR spectroscopy, and the results are comparable to a change in the fluorescence emission ratio that is defined as the shift in fluorescence intensity in the measured wavelength range. The result also shows that by the measurement of fluorescence emission ratio, it is possible to detect the oxidation of oil relatively earlier than by other methods. This study suggests that the developed technology can provide sufficient information for evaluating the insulating oil quality, and that the developed FER sensor can be used as an effective condition monitoring device of electrical insulating oil oxidation.

• Journal of Microbiology and Biotechnology
• /
• 제17권12호
• /
• pp.1922-1929
• /
• 2007

A simple whole-cell-based sensing system is proposed for determining the cell mass of H. pluvialis using ultraviolet fluorescence spectroscopy. An emission signal at 368 nm was used to detect the various kinds of green, green-brown, brown-red, and red H. pluvialis cells. The fluorescence emission intensities of the cells were highest at 368 nm with an excitation wavelength of 227 nm. An excitation wavelength of 227 nm was then selected for cell-mass sensing, as the emission fluorescence intensities of the cell suspensions were highest at this wavelength after subtracting the background interference. The emission fluorescence intensities of HPLC-grade water, filtered water, and HPLC-grade water containing a modified Bold's basal medium (MBBM) were measured and the difference was less than 1.6 for the selected wavelengths. Moreover, there was no difference in the emission intensity at 368 nm among suspensions of the various morphological states of the cells. A calibration curve of the fluorescence emission intensities. and cell mass was obtained with a high correlation ($R^2=0.9938$) for the various morphological forms of H. pluvialis. Accordingly, the proposed method showed no significant dependency on the various morphological cell forms, making it applicable for cell-mass measurement. A high correlation was found between the fluorescence emission intensities and the dry cell weight with a mixture of green, green-brown, brown-red, and red cells. In conclusion, the proposed model can be directly used for cell-mass sensing without any pretreatment and has potential use as a noninvasive method for the online determination of algal biomass.

• Journal of Biosystems Engineering
• /
• 제33권2호
• /
• pp.136-141
• /
• 2008

Fecal contaminations on poultry carcasses, not easily discemable by human eyes, are potential harbor sites of pathogenic Escherichia Coli (E. coli O157:H7). Development of sensitive detection methods for fecal contamination is essential to ensure safe production of poultry products. Fluorescence has been shown to be very sensitive in detecting fecal and other biological substances that can harbor pathogens. In this study, fluorescence excitation-emission spectra of poultry fecal matter were compared with spectra for poultry skin and meat. Results indicated that the combinations of fluorescence intensities at the wavelength of 520 nm, 579 nm, 625 nm, and 635 nm with 411 nm excitation showed above 97% accuracy for differentiation of the contaminants from poultry tissues. Excitation and emission bands determined could be used for constructing a real-time fluorescence imaging device for detection of harmful residues on poultry carcasses.

• Bulletin of the Korean Chemical Society
• /
• 제6권3호
• /
• pp.164-168
• /
• 1985

The fluorescence emission of polystyrene-acrylic acid copolymers containing $Eu^{3+}$ in tetrahydrofuran solution was investigated by spectrofluorimetry. The excimer emission increased linearly with the polymer concentration up to approximately $5{\times}10^{-3}$M. Benzene and toluene collisionally quenched the excimer fluorescence and thier rate constants of quenching were determined. Quenching efficiencies decreased in the order: naphthalene > toluene > benzene. Analyses of Rayleigh scattering and europium emission showed no measurable structural changes observed under the experimental conditions.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.223-230
• /
• 2017

Three super hydrophobic fluorescence dyes were selected to dye high molecular weight polyethylene fiber and their molar absorptivity, emission spectrum, and quantum yield were measured. From the results of color strength on the fiber, all the three dyes exhibited linear increase according to the dye concentration and Fluoro3 dye showed the highest color strength among them. Emission strength of the fluorescence dyes on the fiber was investigated according to the dye concentrations. The emission was increased with the increase of the dye concentration at relatively low dye concentration and then after showing the maximum emission strength the emission was decreased at higher dye concentrations. The highest emission was obtained in Fluoro2 dye. Color fastness to washing and rubbing was generally good enough, however, especially to light, only Fluoro3 dye exhibited rating 3 acceptable practically and Fluoro1 and 2 was ratings 1 which is unacceptable level.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.28-32
• /
• 2010

Thiophene-derivatized pentiptycenes were synthesized and characterized by NMR and UV-Vis spectroscopy. Aggregation behavior of thiophene-derivatized pentiptycenes was monitored by the measurement of fluorescence. Fluorescence intensities for the thiophene-derivatized pentiptycenes and thiophene-derivatized pentiptycenes aggregates were compared. There is no shift in the maximum of the emission wavelength. In the range of water fraction between 20% and 40%, the emission intensity of thiophene-derivatized pentiptycene aggregates remains almost identical. Fluorescence efficiency incresaed by about 5 times higher when the thiophene-derivatized pentiptycenes forms the aggregates in solution.

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.158-162
• /
• 1996

The steady-state emission and fluorescence lifetimes of 1,3-dipyrenylpropane were measured in silicate sol-gel and xerogel matrices. In sol solution, the fluorescence emission spectra of monomer and excimer resemble those in hydrocarbon solvents. In gel and xerogel condition, however, the fluorescence spectra exhibit significant change, largely confirming the intramolecular motions in gel pores are influenced by microviscosity. The rate constants for intramolecular excimer formation were obtained from the measured fluorescence lifetimes and the rate processes for excimer forming in silicate sol-gel are described by a simple kinetic scheme.

• Journal of Photoscience
• /
• 제2권1호
• /
• pp.13-18
• /
• 1995

The steady-state emission spectra of dicoumarol (DC) in ethanol and EPA have been examined at various temperatures (77-298 K). At room temperature, a fluorescence spectrum of DC in ethanol shows a emission maximum at 350 nm. In EPA a Stokes-shifted emission band appears around 470 nm in addition to the 350 nm emission, and its intensity is enhanced as temperature decreases. This emission is attributed to a zwitterionic tautomer of DC formed by a single excited-state intramolecular proton transfer (ESIPT) along the internal hydrogen-bonding. The fluorescence lifetimes have been measured at 350 and 450 nm as a function of temperature. The fluorescence decay at 350 nm is single exponential at any temperature, whereas the one at 450 nm becomes biexponential at temperatures below 250 K. These results are discussed in terms of a conformational change followed by the ESIPT. The activation energy barrier for the conformational change has been determined to be 3.7 $\pm$ 0.2 kJ/mole.

• Bulletin of the Korean Chemical Society
• /
• 제23권9호
• /
• pp.1315-1327
• /
• 2002

The model compounds, 8-methoxypsoralen-CH2O(CH2)n-adenine (MOPCH2OCnAd, n=2, 3, 5, 6, 8, and 10) in which 5 position of 8-methoxypsoralen (8-MOP) is linked by various lengths of polymethylene bridge to N9 of adenine. UV absorption spectra are identical with the sum of MOPCH2OC3 and adenine absorption spectra. Solvent effects on the UV absorption and fluorescence emission spectra indicate that the lowest excited singlet state is the $(\pi${\rightarrow}$\pi*)$ state. The spectral characteristics of the fluorescence of MOPCH2OCnAd are strongly dependent upon the nature of the solvents. The fluorescence emission spectra in aprotic solvents are broad and structureless due to the excimer formation through the folded conformation accelerated by hydrophobic ${\pi}-{\pi}$ stacking interaction. Increasing polarity of the protic solvents leads to higher population of unfolded conformation stabilized through favorable solvation and H-bonding, and consequently to an increase in the fluorescence intensity, fluorescence lifetime, and a shift of fluorescence maximum to longer wavelengths. The decay characteristics of the fluorescence in polar protic solvents shows two exponential decays with the lifetimes of 0.6-0.8 and 1.6-1.9 ns in 5% ethanol/water, while MOPCH2OC3 shows 0.5 and 1.7 ns fluorescence lifetimes. The long-lived component of fluorescence can be attributed to the relaxed species (i.e., the species for which the solvent reorientation (or relaxation) has occurred), while the short-lived components can be associated with the unrelaxed, or only partially relaxed, species.

• 대한화학회지
• /
• 제26권4호
• /
• pp.224-228
• /
• 1982

chl-b를 소중합체로서 용매에 녹였을 때 친핵성 n-prOH를 첨가함에 따라 흡광도와 fluorescence emission의 세기는 증가하였지만 단위체로 녹은 다음에 n-prOH의 농도증가에 따라 점차 감소하였다. chl-b는 소중합체의 생성때문에 Beer 법칙에 따르지 않았으며 용매의 극성변화에 따라 stockes shift를 나타냈다. 이러한 경향성은 chl-b의 정량에 고려하여야될 점이다.