• 한국연소학회지
• /
• 제7권1호
• /
• pp.52-57
• /
• 2002

A numerical investigation using a commercial CFD program of the Inter-Phase Slip Algorithm has been carried out for detail characteristics of particle motions and bubble behaviors in a two dimensional fluidized bed. The bed simulated has been operated with three different distributor geometries, such as bubble cap, nozzle, and perforated plate types. Experiments using a slit-type two-dimensional fluidized bed and a cylinder-type fluidized bed have been performed in order to confirm the simulation model. In addition, the numerical results are compared with the wellknown correlation of bubble sizes and bubble rising velocities by Mori and Wen [1]. The simulation model that we applied is shown to be useful to understand the relation between bubble behaviors and distributor geometries.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.54-61
• /
• 1998

This study was conducted in order to evaluate the treatment efficiencies of anaerobic packed and fluidized-bed biofilm and to investigate applicability in treating livestock wastewater. Biocarbonate alkalinity(BA) and volatile fatty acid(VFA) were about 3,230-3,270 mg/l, 3,790-3,126 mg/l(as CaCO$_3$) and 224-402 mg/l, 141-387 mg/l(as CH$_3$COOH), and VFA/BA ratio was about 0.069~0.12, 0.045-0.12 in packed and fluidized-bed biofilm. When COD loading rate was 6.0 kg COD/$m^3\cdot$ day in packed and fluidized-bed biofilm, methane gas production were 3.23 l/day and 4.38 l/day, respectively. In the same COD loading rate, methane gas production volumes per kg COD removal were 0.25 m$^3$ CH$_4$/kg COD$_{rm}$ and $0.28 m^3 CH_4/kg COD^{rm}$, respectively. At this time, it could be estimated that fluidized-bed biofilm was more high. In case of HRT 0.94 day(6.0 kg COD/$m^3\cdot$ day) and 11 day(0.5 kg COD/$m^3\cdot$ day), packed-bed biofilm showed 59% and 81% COD removal efficiency, respectively. While fluidized-bed biofilm showed 72% and 85% removal efficiency, respectively. It was showed that fluidized-bed biofilm was more efficient. Packed-bed biofilm was higher than fluidized in treatment efficiencies of organic matters, but required continuous treatment using combined system, because it was very exceeded over an environmental standard solidified from '96 year. In operating fluidized-bed biofilm, if farm house consider high power cost according to high circulation ratio in an economic point of view, it would have an effect that farm house use packed-bed biofilm as combined system in treating livestock wastewater.

• 한국환경과학회지
• /
• 제6권1호
• /
• pp.1-8
• /
• 1997

Varing the flow velocity of solution and particle diameter, the mass transfer coefficient of the local electrode on current feeder has been measured in an empty flow reactor, an inert fluidized bed electrode reactor, and an active fluidized bed electrode reactor. It had its maximium value when the bed porosity was 0.6 to 0.65 and decreased with in- creasing the height of local electrode. The mass transfer coefficient was found to be high especially when higher particle was fluidized. Electrochemical deposition of copper dissolved in the synthesized wastewater has been performed in the active fluidized bed electrode reactor. The deduction rate was higher than 90% and the residual concentration of copper decreased to less than 5ppm.

• Journal of Dairy Science and Biotechnology
• /
• 제40권3호
• /
• pp.134-142
• /
• 2022

Protein-enriched dairy powder is widely consumed to promote muscle synthesis. Recently, in Korea, elderly people have also begun consuming protein powder products to prevent muscle loss. However, these protein-enriched powders have poor flowability and hydration properties because of the fine particles of spray-dried milk protein powder. Therefore, in this study, the fluidized bed agglomeration process was used to solve these problems. The rheological and physical properties of milk protein isolate (MPI)/skim milk powder (SMP) mixtures were effectively improved via fluidized bed agglomeration. The particle size of the MPI/SMP mixtures significantly increased from 35.7-58 ㎛ to 118-136 ㎛, the flowability level improved from fair (21.4-26.3) to good (15.7-16.3), and the cohesiveness level changed from intermediate (1.27-1.36) to low (1.18-1.19) after fluidized bed agglomeration. In addition, the wetting time of the agglomerated MPI/SMP mixtures was effectively reduced to 4.67-58.3 s by fluidized bed agglomeration. These findings may be useful for manufacturing protein-enriched dairy powders with good instant properties.

• 한국축산식품학회지
• /
• 제42권6호
• /
• pp.915-927
• /
• 2022

Recently, protein-fortified milk powders are being widely consumed in Korea to prevent sarcopenia, and the demand for high-protein food powders is continuously increasing in the Korean market. However, spray-dried milk proteins have poor flowability and wettability owing to their fine particle sizes and high inter-particle cohesive forces. Fluidized bed agglomeration is widely used to improve the instant properties of food powders. This study investigated the effect of fluidized bed agglomeration on whey protein isolate (WPI)-fortified skim milk powder (SMP) at different SMP/WPI ratios. The fluidized bed process increased the particle size distribution, and agglomerated particles with grape-like structures were observed in the SEM images. As the size increased, the Carr index (CI) and Hausner ratio (HR) values of the agglomerated WPI-fortified SMP particles exhibited excellent flowability (CI: <15) and low cohesiveness (HR: <1.2). In addition, agglomerated WPI-fortified SMP particles exhibited the faster wetting time than the instant criterion (<20 s). As a result, the rheological and physical properties of the WPI-fortified SMP particles were effectively improved by fluidized bed agglomeration. However, the fluidized bed agglomeration process led to a slight change in the color properties. The CIE L^* decreased, and the CIE b^* increased because of the Maillard reaction. The apparent viscosity (η_a,10) and consistency index (K) values of the rehydrated solutions (60 g/180 mL water) increased with the increasing WPI ratio. These results may be useful for formulating protein-fortified milk powder with better instant properties.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.651-655
• /
• 2000

The objective of present work is to investigate experimentally the characteristics of heat transfer. A fluidized bed combustion has advantages of pollution control, fuel flexibility and excellent heat transfer. The present study investigates fundamental phenomena of bed-to-surface heat transfer in high temperature fluidized beds to improve design of immersed tube surface. The tested operating variables are bed temperature, supeficial velocity, mean size of bed material, and the rake angle of fin. Generally, heat transfer rates between the fluidized bed and immersed finned-tube are much higher than those of a smooth tube. A life time of finned-tube is generally longer than that of smooth tube.

• 한국식품과학회지
• /
• 제41권1호
• /
• pp.27-31
• /
• 2009

식품의 원료인 참기름을 캡슐화하기 위해 전보(11)에서 최적화한 model system을 기초로 피복물질을 선정하고 이에 3%의 gellan gum을 첨가한 후 유화압력을 20.7 MPa로 하여 유화액을 제조하였다. 이를 top spray dryer와 fluidized bed granulator에 의한 공정으로 캡슐을 제조하여 캡슐화 수율, surface oil, 수분함량, 입자 크기, 캡슐의 저장 안정성 및 제품 응용성을 비교하였다. Fluidized bed granulator에 의한 캡슐은 top spray dryer에 의한 캡슐보다 상대적으로 surface oil 함량이 낮고 수율이 높으며 입자 크기가 컸다. 제조한 캡슐을 $37^{\circ}C$에서 저장하면서 flavor retention을 측정한 결과 참기름 원료 자체를 저장한 경우 향기 성분은 1% 이하의 잔존 함량을 나타내어 대부분의 향기 성분이 소실되었다고 보았으나, top spray dryer와 fluidized bed granulator에 의한 캡슐은 각각 37%, 42%의 향기성분을 보유하여 향기 성분 포집성 및 보존성이 우수하였다. 또한 쇠고기 죽 제품에 응용한 후 관능검사 결과에서도 참기름 캡슐을 사용한 제품들이 모두 참기름 원료 자체를 사용한 제품보다 풍미의 강도 및 기호도면에서 모두 높았고 특히 fluidized bed granulator를 이용하여 제조한 캡슐을 사용한 제품이 가장 우수하게 평가되었다. 따라서 참기름 원료와 같이 향기 성분이 소실 되기 쉬운 소재를 fluidized bed granulator를 이용하여 저온 미세 캡슐화하면 풍미의 안정성 증대에 효과가 있을 것으로 판단된다.

• 한국연소학회지
• /
• 제14권3호
• /
• pp.1-15
• /
• 2009

The circulating fluidized bed (CFB) boiler has some problems to scale up. Several engineering solutions have been proposed by a few suppliers which had advanced CFB technology. Large-scale CFB design concepts from different suppliers were reviewed and compared. Points of the hydrodynamic and heat recovery were summarized and discussed for developing the guideline of the large-scale circulating fluidized bed boilers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.115-116
• /
• 2023

In this study, it was confirmed whether kaolin can play a role as a bed materials and a role in reducing clinkers by using kaolin with a bed materials for the purpose of removing clinkers such as slagging and fouling generated in circulating fluidized bed combustion furnaces using solid fuel.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.81-87
• /
• 2014

고체가 연속적으로 주입되고 배출되는 상온 상압 2단 기포 유동층(내경 0.1 m, 높이1.2 m)의 흐름특성을 조사하고, 운전유속범위를 고찰하였다. 고체는 상부 기포 유동층으로 주입되고, 넘쳐서 기계적 혹은 비기계적 밸브가 없이 단순히 농후상 고체 층으로 이루어진 고체 수송관(standpipe, 내경 0.025 m)를 통하여 하부 기포 유동층의 층으로 주입되며, 하부 유동층을 넘쳐서 고체가 배출되었다. 기체는 하부 유동층을 유동화하고 배출된 후 다시 상부 유동층을 유동화하였다. 기체로는 공기를 사용하였고, 고체로는 입도가 큰 입자(< $1000{\mu}m$, 겉보기 밀도 $3090kg/m^3$)와 입도가 작은 입자(< $100{\mu}m$, 겉보기 밀도 $4400kg/m^3$)를 혼합한 입자를 사용하였으며, 혼합비를 변수로 하였다. 하부 유동층 기체가 고체수송관의 고체흐름을 비우고, 우회하는 조건일 때 하부 유동층 유동화 속도를 붕괴속도로 정의하였다. 본 공정의 운전이 가능한 최대기체유속으로 붕괴속도가 사용될 수 있었다. 붕괴속도는 작은 입자 혼합비가 증가함에 따라 증가하여, 30%에서 가장 큰 값을 나타낸 후, 감소하였다. 붕괴속도의 경향은 고체수송관 상단과 하단 사이의 압력차 경향과 유사하였다. 붕괴속도는 벌크밀도(bulk density)와 정체층 공극률의 함수로 나타내졌으며, 벌크밀도가 증가하면 증가하고, 정체층 공극률이 증가하면 감소하였다.