• Journal of the KSME
• /
• v.35 no.7
• /
• pp.620-637
• /
• 1995

이 글에서는 유동층소각로와 관련된 기술적 사항을 정리하고자 한다. 일부 교과서적인 내용이 서술되어 있으나, 자세한 이론적 고찰보다는 현상적인 이해에 중점을 두고, 실제 유동층 소각로와 관련된 분야에서 연구를 수행하는 연구자들과의 토론 및 설계시 고려하여야 할 사항들을 간략히 포함한다. 일반적으로 유동층은 효울적인 화학반응로로서 주로 이용되고 있으나, 이 글에서는 환경 및 에너지분야와 일정한 관계가 있는 폐기물 소각로 및 석탄연소로로서의 유동층의 응용에 초점을 맞추고 있다. 우선 환경 및 에너지산업의 현황을 이해함으로써 유동층의 핵심적 역할 담당 가능성을 밝힌다. 그리고 소각로의 종류 및 유동층의 역사와 응용에 대하여 각략히 설명 한다. 여타의 소각로와는 다른 특성인 기포유동특성 및 유동화에 대하여 논함으로써 유동층에 대한 기본현상을 파악한다. 유동층 소각로의 중요한 기능인 공해물질의 노내처리에 대하여 논 의하고, 기포유동층보다 효율적인 순환유동층 및 가압유동층의 특성과 역할을 소개한다. 그리고 유동층 소각로의 예로 일본의 폐기물소각로 및 하수슬러지 소각로개발 현황을 소개한다. 최종 적으로는 유동장 소각로의 실제 설계과장에 대하여 간략히 해설한다.

• Microbiology and Biotechnology Letters
• /
• v.11 no.3
• /
• pp.169-174
• /
• 1983

The study was concerned with the biological denitrification of wastewater using the fluidization of biofilm-coated carbon particles. And the effect of Glucose and biofilm thickness on denitrification was mainly investigated. Experimental results showed that biofilm thickness increased with the growth of bacteria and 14 days after the beginning of operation, the thickness approached 300-310${\mu}{\textrm}{m}$. It was found that biofilm thickness was directly concerned with the removal efficiency of NO$_3$$^{[-10]}$ -N. As the results of experiments to find out the influence of Glucose on denitrification, Glucose, 60% excess from stoichiometric quantity was adequate and sufficient to react the bacteria with NO$_3$$^{[-10]}$ -N.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.354-357
• /
• 2008

본 연구는 광전자촉매 시스템(PECS) 적용을 위하여 광촉매 금속판과 코팅비드를 제조하여 특성을 고찰하였다. 광촉매 물질의 회수가 용이하고, 실용화하기 위하여 티타늄 금속판을 $400^{\circ}C$에서 $700^{\circ}C$까지 $50^{\circ}C$에서 $100^{\circ}C$간격으로 토치를 사용하여 산화처리 하였으며, 비드의 경우 alumina, glass, silica gel beads에 TTIP([Ti$(OC_3H_7)_4$], Aldrich)을 전구체로 사용하여, 유동층 화학기상증착공정(Fluidized Bed Chemical Vapor Deposition, FB-CVD)으로 박막코팅을 하였다. 광촉매 금속판의 경우 산화처리 후 외관상태와 성분분석 시 최적조건은 $400^{\circ}C{\sim}500^{\circ}C$ 60분간 토치로 산화하였을 때였으며, 광촉매 코팅비드의 경우 silica gel beads가 본연의 다공구조를 나타내며 박막코팅이 되어, 상대적으로 alumina, glass beads에 비해 반응표면적이 크게 나타났다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.15-18
• /
• 1995

내경 0.1 m, 높이 0.9 m 의 draft tube 를 갖는 직경 0.3 m, 높이 2.7 m 인 내부순환유동층가스화 반응기에서 생성가스분리대를 설치하여 가스화구역에서 생성된 생성가스를 분리하여 중열량가스를 얻었다. 석탄공급량 4.3 - 8.6 kg/hr, $O_2$/C 의 비 0.25 - 0.35, $H_2O$/C 의 비 0.75 - 1.35 의 조업변수 변화조건에서 생성가스의 조성과 발열량이 측정되었다. 반응 온도가 증가함에따라 H$_2$ 와 CO가 증가하고 $CO_2$ 와 $N_2$는 감소하여 생성가스 발열량이 10 - 11.5 MJ/㎥ 으로 증가하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.121-131
• /
• 1996

Recently, circulating liquid fluidized bed heat exchangers are widely used in a number of places - chemical, process, food concentration, waste water treatment facilities, etc. In a circulating heat exchanger, solid particles circulate with the liquid, thereby increase the heat transfer and reduce the fouling potential of the heat exchanger. In this study, glass beads were circulated through a vertical tube. The pressure loss and the heat transfer coefficient were measured. At low flow velocities, glass beads enhanced the heat transfer considerably. The enhancement increased as the volume fraction of the glass beads increased. It also increased as the particle diameter increased. The pressure loss showed a similar trend. From the observed particle behavior near tube wall, a possible explanation of the trend is provided.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.45-49
• /
• 1999

Seaweed alginate was acetylated by activated carbon immobilized Pseudomonas syringae in a fluidized bed, up-flow reactor. The acetylation degree of seaweed alginate was about 30%. Calcium-acetylated seaweed alginate gel bead was made and compared to calcium-seaweed alginate gel bead by the scanning electron microscopy (SEM). Structural difference of two gel beads may results from increased viscosity and decreased affinity of acetylated seaweed alginate for calcium ion. On the basis of interior and exterior structure of calcium-acetylated seaweed alginate gels and property of acetylated seaweed alginate, it seems that acetylated seaweed alginate is used for the supporter for electrophoresis and packing materials for liquid chromatography and gel filtration.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.11a
• /
• pp.92-95
• /
• 1993

실험실 규모의 유동층 반응기(0.8 m H $\times$ 0.08 m I.D.) 에서 반응온도(700 -80$0^{\circ}C$), 유동화속도(1.5 - 3 Umf)의 영향에 따른 생성물의 수율, 생성가스의 조성, 생성가스의 발열량의 변화를 질소 분위기하에서 조사하였다. 반응온도를 700 에서 850 $^{\circ}C$로 증가시킬 때 촤의 수율은 36% 정도로 온도에 따라 큰 차이를 보이지 않은 반면 가스의 수율은 온도가 증가함에 따라 22 %에서 800 $^{\circ}C$까지 30%가량 증가하다 그 이상의 온도에서는 증가하지 않았다. 또한 수소와 메탄은 온도가 증가함에 따라 그 생성량이 증가하는 반면 에탄과 프로펜은 감소하였으며 단위 부피당 가스의 발열량은 감소하였다.

• Solar Energy
• /
• v.6 no.1
• /
• pp.3-11
• /
• 1986

Minimum fludizing velocities and voidages were investigated for closely sized sand and magnesia particles with mean diameters in the range of $297-841\;{\mu}m$ over the temperature between 15 and $1.000^{\circ}C$. Boundaries between changing behaviour at $Re_{mf}=14$ and Ar=17,000 were observed. In beds of fine particles in Geldart's group "B", the minimum fluidizing velocity ($U_{mf}$) decreased as temperature increased, but not as much as expected on account of the gas viscosity increase, furthermore the increase in the minimum fluidizing voidage (${\in}_{mf}$). With larger particles in group "D", $U_{mf}$ increased, first, with temperature increase because of reduced gas density, and depending on the particle size, $U_{mf}$ reduced as flow conditions moved from turbulent to laminar. Among the correlations predicting $U_{mf}$, Ergun equation agreed best with the experimental data providing that the change in ${\in}_{mf}$ according to temperature is allowed for.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.35-36
• /
• 2018

Korea has many problems due to the asphalt pavement or impermeable pavement. Many methods are being implemented to improve water circulation. Among them, permeable packaging materials are used. However, existing permeable packaging materials have a problem of causing efflorescence and clogging the pores. The pores of the permeable packing material are clogged and the permeability is lost. This leads to economic problems and product problems. The purpose of this study was to develop a block to prevent efflorescence.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.156-157
• /
• 2014

Inorganic binding material was made by recycled resource and its applicability as pile-filling material was examined. The result was that the material had same liquidity with the liquidity of OPC and high reactivity with site soil. According to dynamic/static loading tests by site test-construction, the inorganic binding material met both design bearing capacity and settlement. Since the inorganic binding material showed same or better performance than OPC, the utilization possibility of the inorganic binding material made of recycled resource as pile-filling material was verified.