• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.789-796
• /
• 2012

함정의 수중방사소음은 그 해석의 어려움이나 정확성에 있어서 매우 관심이 큰 문제이다. 본 논문에서는 구조물의 수중방사소음을 해석하기 위하여 유한요소/경계요소 연성해석법을 제안하였다. 제안된 방법은 헤름홀츠방정식에 대한 Burton-Miller 적분방정식에 기반하는 부가수 질량과 감쇠행렬을 이용하여 구조물의 구조-유체 연성응답을 해석하고 계산된 구조물의 응답으로부터 수중방사소음을 계산하는 순차적인 방법이다. 구조-유체연성작용의 구조해석은 상용소프트웨어인 MSC/NASTRAN 에 구조-유체연성효과 행렬을 추가하여 해석하는 방법으로 이루어졌고, 수중방사소음의 경우는 전용 소프트웨어를 개발하였다. 개발된 수중방사소음 해석법을 간단한 예제를 통하여 그 특성을 살피고, 실제 함정의 받침대 진동에 의한 수중방사소음의 계산에 적용하여 그 유용성을 보였다.

• 자동차안전학회지
• /
• 제8권2호
• /
• pp.24-29
• /
• 2016

A small-sized turbocharger is generally used in downsizing engine for various vehicles. When a centrifugal compressor, which is one of the crucial units of the turbocharger, is downsized, the compressor has much more possibilities of being damaged because of its high rotating speed, causing insecure structural soundness. Thus, it is of essential to study on the improvement of the structural soundness of a small-sized turbocharger. In this study, numerical analysis on the various blade geometries and mass flow rate of the compressor was performed using the commercial software ANSYS CFX. In addition, the evaluation on the structural soundness of a compressor impeller for respective cases was conducted using ANSYS Mechanical. As a result, it was shown that the compressor had higher efficiency with increasingly secured structural soundness.

• International Journal of Aerospace System Engineering
• /
• 제8권1호
• /
• pp.1-13
• /
• 2021

Contra-rotating fan is comprised of two rotors which are rotating in the opposite direction. The fan stages are named rotor-1 and rotor-2. Benefits from the use of contra rotation are in terms of better efficiency and improved thrust to weight ratio. Failure of contra-rotating fan stage blade in-service results in safety risks, repair costs, and revenue losses. This paper focuses on the vibration analysis and one way fluid-structure interaction of high aspect ratio, low speed contrarotating fan rotors. Modal analysis and modal pre-stress analysis of contra-rotating fan rotors were carried out to calculate the natural frequencies, One way fluid-structure interaction (FSI) was carried out where the computational analysis of the blades was performed using ANSYS CFX. The boundary conditions for CFD analysis were considered from the actual experimental velocity flow field at the inlet and pressure outlet. Based on the results obtained from the CFD analysis, the structural analysis such as deformation and Von-Misses stresses was carried out by using the finite element method (FEM) with ANSYS. The results provide necessary guidelines for the safe running of the contra-rotating fan. The analysis also will be helpful to understand the change of flow behavior due to a rotor deformation.

• 한국공간구조학회논문집
• /
• 제14권4호
• /
• pp.47-54
• /
• 2014

This paper presents the structural model development and verification processes of wind turbine blade. The National Renewable Energy Laboratory (NREL) Phase VI wind turbine which the wind tunnel and structural test data has publicly available is used for the study. The wind turbine assembled by blades, rotor, nacelle and tower. The wind blade connected to rotor. To make the whole turbine structural model, the mass and stiffness properties of all parts should be clear and given. However the wind blade, hub, nacelle, rotor and power generating machinery parts have difficulties to define the material properties because of the composite and assembling nature of that. Nowadays to increase the power generating coefficient and cost efficiency, the highly accurate aerodynamic loading evaluating technique should be developed. The Fluid-Structure Interaction (FSI) is the emerging new way to evaluate the aerodynamic force on the rotating wind blade. To perform the FSI analysis, the fluid and structural model which are sharing the associated interface topology have to be provided. In this paper, the structural model of blade development and verifying processes have been explained for Part1. In following Part2 paper, the processes of whole turbine system will be discussing.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.24-31
• /
• 2006

본 연구에서는 완전 내재적 기법을 이용한 2계 자유도 모델에 대한 플러터 해석을 수행하였다. 유동해석을 위하여 2차원 Navier-Stokes 지배방정식을 ε-SST 난류모델과 DP-SGS 병렬화 기법을 이용해 구성하였다. 구조해석을 위하여 피치 와 플런지의 2계 자유도를 갖는 모델을 구성하였으며 시간영역에서의 해석을 위하여 유동해석과 마찬가지로 이중 시간 전진 기법을 이용하였다. 가상 시간 전진에서 유체-구조 결합을 통해서 강성결합을 구현하였으며 이를 천음속 플러터 예측에 적용하였다. 플러터 해석의 전형적인 응답인 감쇠응답, 중립응답, 발산응답 및 limit cycle oscillation (LCO) 등을 계산하였으며, 더불어 플러터 속도 경계곡선을 작성하였다. 천음속 플러터 해석은 난류모델 뿐만 아니라 유체-구조 결합 방법에 따라 다른 특성을 보임을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.652-653
• /
• 2009

In this study, flow-induced vibration (FIV) analyses have been conducted for a 3D compressor blade model. Advanced computational analysis system based on computational fluid dynamics (CFD) and computational structural dynamics (CSD) has been developed in order to investigate detailed dynamic responses of designed compressor blades. Fluid domains are modeled using the computational grid system with local grid deforming and remeshing techniques. Reynolds-averaged Navier-Stokes equations with $\kappa-\varepsilon$ turbulence model are solved for unsteady flow problems of the rotating compressor model. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3D compressor blade for fluid-structure interaction (FSI) problems. Detailed dynamic responses and instantaneous pressure contours on the blade surfaces considering flow-separation effects are presented to show the multi-physical phenomenon of the rotating compressor blade.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.80-86
• /
• 2016

In this study, The watertight damper was designed to improve conventional DN 350A butterfly valve. The FSI(Fluid-Structure Interaction) analysis has performed to investigate the safety factor for the watertight damper. When watertight damper of disk was closed, the disk of pressure value is constant. However depending on the opening angle of disk, the flow velocity and pressure are changed. The maximum velocity was appeared at the end of disk on the small outlet area of duct. When the opening angel of disk is $90^{\circ}$, the maximum velocity was appeared at the center of ending disk. So we were found the opening angle of disk is bigger, the flow rate is increased and velocity is also increased from the result of FSI analysis. We can find the least deformation and stress when the opening angel of damper is $90^{\circ}$. When the $45^{\circ}$ opening angle of disk, the largest deformation and stress was found and the minimum safety factor 1.3 was calculated. As a result, we found that the structure of watertight damper is safe enough irrespective of opening angel.

• 한국소음진동공학회논문집
• /
• 제19권6호
• /
• pp.551-559
• /
• 2009

In this study, flow-induced vibration(FIV) analyses have been conducted for a 3D compressor blade model. Advanced computational analysis system based on computational fluid dynamics(CFD) and computational structural dynamics(CSD) has been developed in order to investigate detailed dynamic responses of designed compressor blades. Fluid domains are modeled using the computational grid system with local grid deforming and remeshing techniques. Reynolds-averaged Navier-Stokes equations with $\kappa-\epsilon$ turbulence model are solved for unsteady flow problems of the rotating compressor model. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3D compressor blade for fluid-structure interaction(FSI) problems. Detailed dynamic responses and instantaneous pressure contours on the blade surfaces considering flow-separation effects are presented to show the multi-physical phenomenon of the rotating compressor blade.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.519-522
• /
• 2010

블레이드 구조변형 효과를 고려한 스테이터-로터의 케스케이드 모델의 상호간섭의 평가를 위하여 유체-구조 연계 해석 시스템을 수행하였다. 고정된 스테이트와 회전하는 로터는 상호 간섭 영향이 유동해석에 고려되었다. 또한 정적인 유체-구조 연게해석과 수렴률 증진을 효과적으로 수행하기 위하여 큰 인공감쇠를 가지는 Newmark 시간 적분 기법을 적용하였다. 수치 실험을 통해 탄성축 위치에 따른 구조 변형 효과가 케스케이드 성능에 미치는 영향을 파악하였다. 구조 변형 효과가 고려된 경우 일반적인 강체 블레이드모델에 대한 성능 예측 결과와 다소 차이가 유발될 수 있음을 보였으며 공력 탄성학적 영향을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.154-164
• /
• 2019

A rotor dynamic analysis is mandatory for stability and design optimization of submerged propellers and turbines. An accurate simulation requires a proper consideration of fluid-induced reaction forces. This paper presents a bi-directional coupling of a bond graph method solver and an unsteady vortex lattice method solver where the former is used to model the rotor dynamics of the power train and the latter is used to predict transient hydrodynamic forces. Due to solver coupling, determination of hydrodynamic coefficients is obsolete and added mass effects are considered automatically. Additionally, power grid and structural faults like grid fluctuations, eccentricity or failure could be investigated using the same model. In this research work a fast, time resolved dynamic simulation of the complete power train is conducted. As an example, the rotor dynamics of a tidal stream turbine is investigated under two inflow conditions: I - shear flow, II - shear flow + water waves.