• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.615-622
• /
• 2017

This study was conducted to evaluate the odor reduction efficacy of the dip injection wet scrubber (DIWS) using tap water as washing fluid. The $NH_3$ and $H_2S$ removal efficiency of 7 day batch operated DIWS was evaluated twice over a total of 14 days of experiment. The $NH_3$ removal efficiency ranged from 26 to 37%. The $H_2S$ removal efficiency was between 22 and 30%. The pH of the washing fluid maintained below 8 and the $NH_4{^+}$ concentration tended to keep constant around 350 ppm after 5 days of washing-fluid replacement. Therefore, the 5-day washing fluid replacement interval is more preferable than the 7-day interval. The $NH_4{^+}$ concentration and the electrical conductivity (EC) showed a high correlation. The EC measurement can be used as an alternative to conventional $NH_4{^+}$ concentration measurement method for real time monitoring of washing fluid condition.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.1007-1013
• /
• 2003

As environmental restriction kas continuously become more strict, machining technology has emphasized on development of environment-friendly technology. In cutting technology, it has been well recognized that cutting fluids might have undesirable effects on workers health and working environment. In this study, compressed cold air was used as a replacement for conventional cutting fluids. The cooling effect on cutting tool was analyzed using the finite element method and the computational fluid dynamics. This study focused on the temperature simulation of cutting tool by real flow analysis of cold air. The maximum flow rate and the minimum temperature of compressed cold air are 300ι/min and -30$^{\circ}C$ respectively. To compare the simulation and experimental results, inner temperature of the cutting tool was measured with the thermocouple embedded in the insert. The results show that the analysis of cutting temperature using FEM and CFD is resonable, and the replacement of cutting fluid with cold air is available.

• 한국해양공학회지
• /
• 제16권3호
• /
• pp.8-18
• /
• 2002

Formulation of the far-field method for the prediction of time-mean hydrodynamic force and moment acting on a 3-D surface-piercing body in waves is reviewed. It is found that the inequality between the weight of the floating body and its buoyancy force permits the replacement of the fluid particles inside the control surface by the fluid particles outside the control surface. Under such circumstances, momentum exchanges across the control surface make the time-mean value of the time rate of the momentum of the fluid inside the control surface non-vanishing. It is a second-order quantity which is hard to calculate by the far-field method. The drift forces and moments on half-immersed ellipsoids are calculated by both the far-field method and the near-field method. The discrepancy between two numerical results is presented and discussed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
• /
• pp.83-92
• /
• 2005

연안지역에서 해수침투대의 특성을 파악하기 위하여 전기전도도 검층을 수행하였다. 검층의 목적은 투수성 파쇄대 및 고염분 지하수가 유입되는 구간의 확인이다. 전기전도도 검층은 시추공 내의 지하수를 전기적으로 다른 성질을 갖는 지하수로 치환하고 일정 양수 또는 자연 상태에서 시간에 따른 전기전도도의 변화를 측정한다. 따라서 시추공과 교차하는 투수성 파쇄대 또는 다공성의 대수층에서 시추공내로 유입되는 지층수 전기전도도의 변화 특성을 일정 시간 간격에 따라서 측정하면 지하수가 유입되는 구간의 확인이 가능하다. 현장 시험에 적용한 공내수 치환 시스템은 주입과 양수, 유량측정이 가능하며 내경이 작은 모니터링 PVC 케이싱도 적용이 가능하도록 제작하였다. 전남 영광의 연안지역에 위치하는 3개 시추공에 공내수 치환기법을 적용하여 전기전도도의 변화 특성을 측정한 결과, 연안지역의 고염분지하수는 균열암반을 통한 해수침투는 물론 간척사업으로 인한 잔류염분의 영향을 동시에 받고 있음을 확인할 수 있었다. 공내수 치환기법과 추가적으로 수행될 정량적인 해석 결과는 연안지역에서 수리상수 추정, 최적의 양수설계, 해수침투 특성 평가 등에 활용될 것으로 예상된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2410-2414
• /
• 2008

Human heart valves diseased by congenital heart defects, rheumatic fever, bacterial infection, cancer may cause stenosis or insufficiency in the valves. Treatment may be with medication but often involves valve repair or replacement (insertion of an artificial heart valve). Bileaflet mechanical heart valves (BMHVs) are widely implanted to replace the diseased heart valves, but still suffer from complications such as hemolysis, platelet activation, tissue overgrowth and device failure. These complications are closely related to both flow characteristics through the valves and leaflet dynamics. In this study, the physiological flow interacting with the moving leaflets in a bileaflet mechanical heart valve (BMHV) is simulated with a strongly coupled implicit fluid-structure interaction (FSI) method which is newly organized based on the Arbitrary-Lagrangian-Eulerian (ALE) approach and the dynamic mesh method (remeshing) in FLUENT. The simulated results are in good agreement with previous experimental studies. This study shows the applicability of the present FSI model to the complicated physics interacting between fluid flow and moving boundary.

• 한국산업융합학회 논문집
• /
• 제16권3호
• /
• pp.95-102
• /
• 2013

It is indispensable to modern society metal processing since the industrialized rapidly, but it is a metalworking cutting fluid immediately. In addition, this means selecting a emulsion on the basis of quality criteria processing method, the material of the material, cutting depth, cutting speed, Djourou fence Liang, and surface roughness, cutting oil, the shape of the device based on the emulsion, I will be the structure of the tank, filtration equipment also changes. In particular, acting bacteria is now breeding in response to the passage of time due to metal ion degradation due to heat generated hydraulic fluid leakage, humidity tung, during processing, seep from processing material at the time of processing the water-soluble cutting oil for generating the malodor by dropping significantly the performance of the cutting oil to corruption from, sometimes by introducing various additives to suppress spoilage in advance. In this study, we expect the effect of the cost reduction in the extension of fluid replacement cycle through the application of the management apparatus and deep understanding in the management of cutting fluid, the working environment through the understanding and interest of workers in the production site more than anything I try to become useful for the improvement.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.136-138
• /
• 2013

현재 해상교통안전시설인 표준등부표의 종류는 10가지이며, 가장 작은 등부표가 4.4m로 대형인 것이 현실이다. 따라서 제작, 교체 및 수리가 용이한 부유형의 소형 등부표를 제안하고자 하였다. 한편 부유형의 경우 환경적 외력에 의한 위치 신뢰도가 떨어지며, 특히 유실 등의 사고에 대비하기 위한 안정성 검토가 필요하다. 이 논문에서는 새로운 등부표의 운동성(Heave, Sway, Pitch)을 상용프로그램을 사용하여 Encounter Frequency별 분석하고, 2차원 경계요소법(Boundary Element Method, BEM)을 이용하여 부유체의 단면형상에 따른 유체력을 수치시뮬레이션하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.453-458
• /
• 2002

The feasibility study on supporting a turbocharger rotor on air foil bearing is investigated. Based on finite difference method and Newton-Raphson method, the static equilibrium position of a turbocharger rotor is predicted. And using finite difference method and perturbation method, dynamic characteristics of air foil bearings are calculated. Rotordynamic analysis is performed by finite element method, with collaboration of calculated stiffness and damping of foil bearing. The effect of compliance and clearance of bump foil bearing on the oil-free turbocharger is investigated in terms of rotordynamics. And the critical speeds, eccentricity ratio, vibration amplitude, and stability are considered. It is demonstrated that foil bearings offer a rlausible replacement for oil-lubricated bearings in turbocharger.

• 한국농공학회논문집
• /
• 제56권3호
• /
• pp.75-81
• /
• 2014

Fossil energy is needed for a whole year greenhouse cropping due to climate in South Korea. Because the most of the fossil energy resources is imported, it is necessary to develop technology to be able to reduce the energy cost in order to manage greenhouse profitably. The greenhouse commonly consume less amount of energy as compared to other industrial sectors. Replacement of fossil fuel with solar thermal storage, therefore, can be an economical as well as environmentally sustainable option for greenhouse heating. The fluid flow, heat storage and radiation characteristic of the gravel bed model were analyzed to provide basic data for design of the experimental solar heated greenhouse with underground thermal storage using gravel. The air flow velocity in the gravel storage bed was proven to be affected from the capacity of circulation fan and the circulation method and the positive pressure method was proven to be the best among the different air circulation methods. The initial air temperature of the thermal storage bed of 1.2 m $wide{\times}9$ m $long{\times}0.9$ m deep was $10^{\circ}C$. After the thermal storage bed is heated by air of the mean temperature $4^{\circ}C$ during 9 hours, the temperature has increased about $20.3^{\circ}C$ and the storage of heat was about 33,000 kcal. The important factors should be taken into consideration for design of the solar heated greenhouse with underground thermal storage using gravel are insulation of rock storage, amount of storing heat, inflow rate and direction of inlet and outlet duct.

• 중환자간호학회지
• /
• 제9권1호
• /
• pp.40-50
• /
• 2016

Purpose: Continuous renal replacement therapy (CRRT) has become the preferred dialysis method to support critically ill children and neonates with acute kidney injury. Using CRRT on neonates has increased, but reports about experience are limited. The aim of this study is to describe the clinical application, outcomes, and complications of CRRT in children and neonates. Methods: A retrospective review was performed in 135 children and 36 neonates who underwent CRRT at a tertiary hospital from 2008 to 2015. Results: At the initiation of CRRT, the median age of children was 72 months and the corrected age of neonates was 37.1 weeks. Median body weight of neonates was 3.2 kg. In neonates, initial degree of fluid overload [FO%], blood flow rate [BFR] and ultrafiltration rate [UFR] rate during CRRT were higher than in children. Median real time of CRRT was 90.5 and 53.5 hours in children and neonates, respectively. Downtime of CRRT was 0.7 and 1.3 hours/day. Median mortality rates (44.4% vs.47.2%) and complication rates were similar between the groups. Conclusion: CRRT can be used for a wide range of critically ill children and neonates. Different application methods of CRRT can contribute to increased survival of neonates.