• 지질공학
• /
• 제30권4호
• /
• pp.557-575
• /
• 2020

유류오염 토양의 투수성 및 정화효율을 개선하기 위하여 고전압 아크 방전에 의한 플라즈마 블라스팅을 토양에 적용하였다. 이 연구를 위하여 고전압 발생장치를 새로 제작하였고, 실트질 모래인 토양시료, 토양시료에 소석회를 혼합한 시료와 토양시료에 시멘트를 혼합한 세 종류의 토양시료를 다져서 소형 토조와 대형 토조를 제작한 후 각각의 토조내에서 플라즈마 블라스팅을 시행하여 유체확산의 범위와 투수성의 변화를 측정하였다. 플라즈마 블라스팅이 시행된 토양시료에서는 플라즈마 블라스팅이 시행되지 않은 대조군에 비해 유체의 확산 부피가 약 11~71% 증가하였다. 낮은 전압하에서 플라즈마 블라스팅이 시행되면 토양 내에서는 구조적 취약면(다짐면)을 따라 수평적 확산이 우세하게 나타났으나 높은 전압에 의한 플라즈마 블라스팅은 토양 내에 구형의 입체적인 확산을 발생시켰다. 플라즈마 블라스팅은 투수성 또한 증가시켰으며, 소석회 및 시멘트가 혼합된 토양에서 더욱 뚜렷하게 관찰되어, 플라즈마 블라스팅이 시행된 시료들은 대조군 시료에 비해 투수계수가 450~1,052% 범위로 증가하였다. 플라즈마 블라스팅이 1회만 실시된 토양시료의 투수계수는 방전 전압이 높아질수록 증가하였으나 동일한 전압으로 여러 번의 블라스팅이 시행된 토양시료의 투수계수는 증가하거나 감소하였다. 토양시료에 경유를 이용하여 인위적으로 오염시킨 토양시료에 플라즈마 블라스팅을 실시하여 정화효율을 측정하였다. 플라즈마 블라스팅이 시행되면, 방전지점 근처의 토양에서는 평균 393%, 방전지점으로부터 20 cm 이상 이격된 하부 토양에서는 평균 239% 정도의 정화효율이 개선되었으나 방전 전압과 정화효율은 상관성을 보이지 않았다. 위의 결과는 플라즈마 블라스팅이 토양의 투수성과 정화효율을 상당히 개선하므로, 유류오염 토양의 원위치 정화에 효율적으로 이용될 가능성을 보여주었다.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.382-388
• /
• 2002

Compomer is composed of matrix and filler : matrix is made of the combination of resins and polycarboxylic molecules that are light-cured, and a filler is a glass component which is capable of ion-release. The resin content of compomers produces polymerization shrinkage which can adversely affect marginal adaptation. Pretreatment is a fundamental step which is treated with conditioner or primer in the use of these materials. Microleakage of restorative materials has been investigated mostly by dye penetration method. Dye penetration method was not quantitative and not measured repeatedly. Fluid filtration method, introduced and developed by Pashley's group, has been extensively used for 20 years for research purpose to understand the physiology of dentin, as well as the effects of various restorative treatments on dentin permeability. It permits quantitative, nondestructive measurment of microleakage in a longitudinal manner. The purpose of this study was to evaluate the change of dentin permeability according to the process of compomer restoration. In this study. Cl V cavities were prepared on buccal surface of thirty extracted human molars. The prepared cavities were etched by 37% phosphoric acid. The experimental teeth were randomly divided into three groups. Each group was treated with following materials Group 1 : Prime & Bond NT/Dyract AP, Group2： Single Bond/F2000 compomer, Group 3 : Syntac Single Component/Compoglass. The bonding agent and compomer were applied for each group following manufacturers information. Dentin permeability of each group was measured at each process by fluid filtration method; Step 1 : preparation(smear layer). Step 2 : etching(smear layer removal), Step 3 : applying the bonding agent, Step 4 : filling the compomer. Dentin permeability was expressed by hydraulic conductance ($\mu\textrm{l}$ min$^{-1}$cm$H_2O$$^{-1}$). The data were analysed statistically using One-way ANOVA and Sheffe's method. The results were as follows : 1. Dentin permeability differences between each process were significant except between step 1 and step 2(p<0.01). 2. Dentin permeability after removal of smear layer was highly increased(p<0.01). 3. In most case, decrease of dentin permeability was obtained by applying bonding agent(p<0.01). 4. Dentin permeability differences among the experimental groups were not significant(p>0.05). 5. None of compomers used in this study showed perfect seal at the interface.

• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.173-183
• /
• 2021

Objectives: This study evaluated the skin permeability of lawsone in henna hair dyes to understand the exposure characteristics of henna hair dyes in the human body. It examined the protective effects of protectants by applying protectants A, B, and C to test skin. Methods: Skin absorption tests were conducted using Franz diffusion cells according to OECD test guideline 428. After applying one kind of natural henna hair dye and chemical henna hair dye, respectively, to a standardized pig skin model, samples of receptor fluid were collected at 1h, 3h, 6h, and 24h. The skin permeation of lawsone was determined using HPLC. After the skin absorption experiment, the skin to which hair dye was applied was analyzed to determine the residual amount of lawsone in the skin. Results: The cumulative permeation of both natural and chemical henna hair dyes increased over time, and the natural henna hair dye had a flux value (t=3.194, p<.05) high both in the K_p value (t=3.207, p<.05) and the residual amount (t=22.701, p<.001). For skin treated with a protectant, the cumulative permeation of natural henna hair dye 24h control and the cumulative permeation of protectant A, B, and C increased over time. Flux and K_p values were in the order control > protectant A > protectant C > protectant B. The residual amount (F=4.469, p<.05) was in the order of protectant C > protectant A > protectant B > control. At 3h, the dye application time of natural henna hair dye, the lawsone flux value (F=4.454, p<.05) and K_p value (F=4.455, p<.05) were higher in the control group than in the protectant groups. The 24h cumulative permeation of the chemical henna hair dye increased with time in both the control and the protectant groups, and the flux and K_p values were in the order of protectant A > protectant C > protectant B > control. The residual amount (F=7.901, p<.01) was in the order of protectant B > protectant A> protectant C > control. Conclusions: Within the normal dyeing time for henna hair dye (three hours for natural henna hair dyes and 30 minutes for chemical henna hair dyes) lawsone skin penetration was not observed even when no protective agent was applied. After that time, however, evidence of skin penetration and retention of lawsone and the protective effect of protective agents were observed.

• 한국환경과학회지
• /
• 제10권1호
• /
• pp.65-71
• /
• 2001

HRP(high rate pond) which had kept the manufactured clay of 3cm-thickness as benthic clay in reactor and the 6 flat-blade turbine as impeller for agitation was named HRASP(high rate algae stabilization pond). And the experiment for treatment of artificial synthesis wastewater containing COD :300mg/$\ell$, NH$_3$-N : 300mg/$\ell$, T-P : 9mg/$\ell$ as nutrients was been performed successfully. This reactor was been operated under conditions : 24hrs.-irradiation and water temperature, $25^{\circ}C$ and pH 7 and agitation velocity, 15, 30, 45rpm and the effect of agitation velocity on algal bioaccumulation of nutrients was been studied with view point of fluid dynamics. The next followings could be obtained as results. 1. The agitation with a turbine impeller blade in HRASP makes clay particle indicate superior suspension effect by means of forming of excellent curl/shear flow in reactor. 2. The excessive suspension of clay particle which is created at 45rpm as rotation velocity of impeller blade of turbine disturbs the light penetration and algal photosynthesis reaction. 3. Efficiencies for removal of nutrients come out as COD : 93.9%~94.3%, ($NH_3-N + NO_3-N$) : 81.9%~99.0%, T-P : 46.8%~53.6%. 4. Kuo values of $K_1$for algal growth come out seperately as 15rpm : $1.876{\times}10^{-2}, 30rpm : 4.618{\times}10^{-3}$. 5. Kuo values of $K_2$for removal of N, P come out seperately as 15rpm : $8.403{\times}10^{-1}$ and $1.397{\times}10^{-1}$, 30rpm : $4.823{\times}10^{-1} and 2.052{\times}10^{-1}$. 6. It can be guessed easily that the excessive agitation can inhibit the algal and bacterial symbiotic reaction if it is considered that micro organism\` sense to preservation of life is relied on natural function of metabolism. Therefore the studies for this matter should be followed continuously.

• Pediatric Infection and Vaccine
• /
• 제23권3호
• /
• pp.236-239
• /
• 2016

길랭-바레 증후군은 약 3분의 2에서 선행 감염이 원인이 되며 면역반응 때문에 발병하는 것으로 알려져 있는데, 그 중 인플루엔자 바이러스는 비교적 드문 원인이다. 발병 기전과 관련된 항체들에 대한 보고들은 몇 차례 있었지만 길랭-바레 증후군 환자의 뇌척수액에서 인플루엔자 바이러스가 직접 검출된 증례는 없었다. 6세 여아가 내원 1주 전 인플루엔자 A로 진단된 후 oseltamivir를 복용하며 증상이 호전되었고, 내원 2일 전 두통 및 하루 전 양하지 위약감이 생겨서 응급실로 왔다. 신체 진찰, 뇌척수액 검사, 신경전도 검사, 척수 자기공명영상 등의 결과를 토대로 길랭-바래 증후군으로 진단하였고, 뇌척수액중합효소 연쇄반응 검사에서 인플루엔자 A 바이러스가 검출되었으며, 면역글로불린 정맥 투여 후 점차 증상이 호전되었다. 본 증례를 통하여 저자들은 인플루엔자 바이러스가 뇌척수액 내로 직접 침투한 것이 길랭-바레 증후군의 발생과 연관이 있을 것이라고 판단하며, 향후 그 기전에 대한 연구가 필요하겠다.

• 센서학회지
• /
• 제13권5호
• /
• pp.378-382
• /
• 2004

A micromachined fluidic structure for the introduction of liquid samples into a chip-based sensor array composed of individually addressable polymeric microbeads has been developed. The structure consists of a separately attached cover glass, a single silicon chip having micromachined channels and microbead storage cavities, and a glass carver. In our sensor array, transduction occurs via colorimetric and fluorescence changes to receptors and indicator molecules that are covalently attached to termination sites on the polymeric microbeads. Data streams are acquired for each of the individual microbeads using a CCD. One of the key parts of the structure is a passive fluid introduction system driven only by capillary force. The velocity of penetration of a horizontal capillary for the device having a rectangular cross section has been derived, and it is quite similar to the Washburn Equation calculated for a pipe with a circular cross section having uniform radius. The test results show that this system is useful in a ${\mu}$-TAS and biomedical applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.416-421
• /
• 2002

This paper dealt with an experimental study on the hydro-elastic vibration of clamped perforated rectangular plates submerged in water. The penetration of holes in the plates had a triangular pattern with P/D (pitch to diameter) 1.750, 2.125, 2.500, 3.000 and 3.750. The natural frequencies of the perforated plates in air were obtained by the analytical method based n the relation between the reference kinetic and maximum potential energy and compared with the experimental results. Good agreement between the results was found for the natural frequencies of the perforated plates in air. It was empirically found that the natural frequencies of the perforated plate in air increase with an increase of P/D, on the other hand, the natural frequencies of the perforated plate in contact with water decrease with an increase of P/D. Additionally, the effect of the submerged depth on the natural frequency was investigated.

• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.70-78
• /
• 2003

This paper dealt with an experimental study on the hydroelastic vibration of clamped perforated rectangular plates submerged in water. The penetration of holes in the plates had a triangular pattern with P/D (pitch to diameter) 1.750, 2.125, 2.500, 3.000 and 3.750. The natural frequencies of the perforated plates in air were obtained by the analytical method based on the relation between the reference kinetic and maximum potential energy and compared with the experimental results. Good agreement between the results was found for the natural frequencies of the perforated plates in air. It was empirically found that the natural frequencies of the perforated plate in air increase with an increase of P/D, on the other hand, the natural frequencies of the perforated plate in contact with water decrease with an increase of P/D. Additionally. the effect of the submerged depth on the natural frequency was investigated.

• The Journal of the Acoustical Society of Korea
• /
• 제29권1E호
• /
• pp.38-44
• /
• 2010

This paper is based on our comments and proposed amendments to the documents, Annex A, Phantom for determining Maximum Depth of Penetration, and Annex B, Local Dynamic Range Using Acoustical Test Objects 87/400/CDV. IEC 61391-2 Ed. 1.0 200X, prepared by IEC technical Committee 87; Ultrasonics. The documents are concerned with the influence of microstructure of reference target material on the ultrasonic backscattering. Previous works on the attenuation due to backreflection and backscattering of reference target materials are reviewed. The drawback to the use of ungraded stainless steel and metallic materials without microstructural data such as, crystal structure, basic acoustic data of sound velocity and attenuation, grain size, roughness and elastic constants has been discussed. The analysis suggested that the insightful conclusion can be made by differentiating the influence arising from target size and microstructure on the backscattering measurements. The microstructural parameters are associated with physical, geometrical, acoustical and mechanical origins of variation with frequency. Further clarification of such a diverse source mechanisms for ultrasonic backscattering would make the target material and its application for medical diagnosis and therapy simpler and more reliable.

• Corrosion Science and Technology
• /
• 제6권1호
• /
• pp.18-23
• /
• 2007

DLC coatings have been deposited onto substrate of STS 316L and Ti alloy using r.f. PACVD (plasma-assisted chemical vapor deposition) with a mixture of $C_{6}H_{6}$ and $SiH_{4}$ as the process gases. Corrosion performance of DLC coatings was investigated by electrochemical techniques (potentiodynamic polarization test and electrochemical impedance spectroscopy) and surface analysis (scanning electron microscopy). The electrolyte used in this test was a 0.89% NaCl solution of pH 7.4 at temperature $37^{\circ}C$. The porosity and protective efficiency of DLC coatings were obtained using potentiodynamic polarization test. Moreover, the delamination area and volume fraction of water uptake of DLC coatings as a function of immersion time were calculated using electrochemical impedance spectroscopy. This study provides the reliable and quantitative data for assessment of the effect of substrate on corrosion performance of Si-DLC coatings. The results showed that Si-DLC coating on Ti alloy could improve corrosion resistance more than that on STS 316L in the simulated body fluid environment. This could be attributed to the formation of a dense and low-porosity coating, which impedes the penetration of water and ions.