• 한국식품영양과학회지
• /
• 제22권6호
• /
• pp.785-791
• /
• 1993

변온 조건하에서 백미를 저장했을때 수분활성에 따른 과당의 변화를 고찰한 결과를 요약하면 다음과 같다. 과당은 저장 초기에 0차반응으로 증가하다가 일정시간 이후 1차반응으로 감소하였다. 반응속도는 수분 활성과 자장온도가 높을수록 빨랐고, 각 수분활성에서의 활성화에너지는 과당 증가시 10.76~19.56, 감소시는 4.53~8.40kcal/mole이었다. 그리고 $Q_{10}$값은 증가시 1.74~2.74, 감소시는 1.26~1.54였다. Accelerated shelf-life test로 부터 구한 $25^{\circ}C$에서의 shelf-life는 수분활성 (0.44, 0.52, 0.65, 0.75)에 따라 252, 212, 193, 162일의 범위였으며, 온도와 수분활성이 증가함에 따라 단축되었다. 변온조건에서의 실측치와 예측치를 비교한 결과 유효 온도차는 과당 증가시 0.49~2.52, 감소에서는 1.03~2.02의 차이를 보였다.

• Wind and Structures
• /
• 제19권4호
• /
• pp.443-465
• /
• 2014

Hyperbolic thin-shell cooling towers have complicated vibration modes, and are very sensitive to the effects of group towers and wind-induced vibrations. Traditional aero-elastic models of cooling towers are usually designed based on the method of stiffness simulation by continuous medium thin shell materials. However, the method has some shortages in actual engineering applications, so the so-called "equivalent beam-net design method" of aero-elastic models of cooling towers is proposed in the paper and an aero-elastic model with a proportion of 1: 200 based on the method above with integrated pressure measurements and vibration measurements has been designed and carried out in TJ-3 wind tunnel of Tongji university. According to the wind tunnel test, this paper discusses the impacts of self-excited force effect on the surface wind pressure of a large-scale cooling tower and the results show that the impact of self-excited force on the distribution characteristics of average surface wind pressure is very small, but the impact on the form of distribution and numerical value of fluctuating wind pressure is relatively large. Combing with the Complete Quadratic Combination method (hereafter referred to as CQC method), the paper further studies the numerical sizes and distribution characteristics of background components, resonant components, cross-term components and total fluctuating wind-induced vibration responses of some typical nodes which indicate that the resonance response is dominant in the fluctuating wind-induced vibration response and cross-term components are not negligible for wind-induced vibration responses of super-large cooling towers.

• Wind and Structures
• /
• 제28권5호
• /
• pp.299-313
• /
• 2019

In order to examine the effects of different wind deflectors on the wind load distribution characteristics of extra-large cooling towers, a comparative study of the distribution characteristics of wind pressures on the surface of three large cooling towers with typical wind deflectors and one tower without wind deflector was conducted using wind tunnel tests. These characteristics include aerodynamic parameters such as mean wind pressures, fluctuating wind pressures, peak factors, correlation coefficients, extreme wind pressures, drag coefficients and vorticity distribution. Then distribution regularities of different wind deflectors on global and local wind pressure of extra-large cooling towers was extracted, and finally the fitting formula of extreme wind pressure of the cooling towers with different wind deflectors was provided. The results showed that the large eddy simulation (LES) method used in this article could be used to accurately simulate wind loads of such extra-large cooling towers. The three typical wind deflectors could effectively reduce the average wind pressure of the negative pressure extreme regions in the central part of the tower, and were also effective in reducing the root of the variance of the fluctuating wind pressure in the upper-middle part of the windward side of the tower, with the curved air deflector showing particularly. All the different wind deflectors effectively reduced the wind pressure extremes of the middle and lower regions of the windward side of the tower and of the negative pressure extremes region, with the best effect occurring in the curved wind deflector. After the wind deflectors were installed the drag coefficient values of each layer of the middle and lower parts of the tower were significantly higher than that without wind deflector, but the effect on the drag coefficients of layers above the throat was weak. The peak factors for the windward side, the side and leeward side of the extra-large cooling towers with different wind deflectors were set as 3.29, 3.41 and 3.50, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.102-115
• /
• 2020

In this study, the SST k - ω turbulence model and the sliding mesh technology based on RANS method have been adopted to simulate the exciting force and hydrodynamic of a pump-jet propulsor in different oblique inflow angle (0°, 10°, 20°, 30°) and different advance ratio (J = 0.95, J = 1.18, J = 1.58).The fully structured grid and full channel model have been adopted to improved computational accuracy. The classical skewed marine propeller E779A with different advance ratio was carried out to verify the accuracy of the numerical simulation method. The grid independence was verified. The time-domain data of pump-jet propulsor exciting force including bearing force and fluctuating pressure in different working conditions was monitored, and then which was converted to frequency domain data by fast Fourier transform (FFT). The variation laws of bearing force and fluctuating pressure in different advance ratio and different oblique flow angle has been presented. The influence of the peak of pulsation pressure in different oblique flow angle and different advance ratio has been presented. The results show that the exciting force increases with the increase of the advance ratio, the closer which is to the rotor domain and the closer to the blades tip, the greater the variation of the pulsating pressure. At the same time, the exciting force decrease with the oblique flow angle increases. And the vertical and transverse forces will change more obviously, which is the main cause of the exciting force. In addition, the pressure distribution and the velocity distribution of rotor blades tip in different oblique flow angles has been investigated.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.446-451
• /
• 2020

전열관군으로 이루어진 열교환기에서 유동에 따른 진동은 전열 관군 배관의 파손을 유발할 수 있어서 열교환기에서 유동 유발 진동 특성을 규명할 필요가 있다. 본 연구는 전열 관군의 원관에서 입구의 유속이 일정한 경우와 주기적인 변동이 있는 경우에 대하여 시간에 따라 전열 관군 원관 1, 10 그리고 마지막 19번 원관에서 와류의 시간 변동 특성을 살펴보고 양력의 시간 변화 특성과 PSD 특성을 분석하여 전열 관군 원관에서 전방류의 주기적인 속도 변동에 따른 유동 특성을 규명하였다. 일정 입구 유속의 경우는 칼만 와류가 후류에 있는 원관의 유동에 영향을 미치고 있고 후류의 전열관군과 전방의 전열관군에서의 와류는 다소 시간적인 차이를 보여주지만 같은 주기의 칼만 와류를 발생하고 있음을 관찰할 수 있었다. 주기적인 입구 유속의 경우는 전열 관군에서 와류가 강한 유동이 흐르다가 유속이 줄어들 때는 와류가 약한 유동이 흐르는 것이 반복됨을 알 수 있다. 일정 입구 유속의 경우는 양력의 PSD로 살펴본 결과 주파수는 37.25Hz이며 19번 원관의 경우는 18.63Hz와 50Hz 근방에서 주파수가 관찰 되었다. 주기적인 입구 유속의 경우는 37.25Hz와 속도 주기인 18.63Hz에서 주된 주파수 특성을 보여주었다. 마지막 원관인 19번 원관은 20Hz에서 50Hz 사이에서 많은 피크 주파수를 관찰할 수 있었다.

• Wind and Structures
• /
• 제7권5호
• /
• pp.317-332
• /
• 2004

Wind tunnel experiments were conducted under highly turbulent and disturbed flow conditions over a solid/perforated plate with a long splitter plate in its plane of symmetry. The effect of varied level of perforation of the normal plate on fluctuating velocities and fluctuating pressures measured across and along the separation bubble was studied. The different perforation levels of the normal plate; that is 0%, 10%, 20%, 30%, 40% and 50% are studied. The Reynolds number based on step height was varied from $4{\times}10^3$ to $1.2{\times}10^4$. The shape and size of the bubble vary with different perforation level of the normal plate that is to say the bubble is reduced both in height and length up to 30% perforation level. For higher perforation of the normal plate, bubble is completely swept out. The peak turbulence value occurs around 0.7 to 0.8 times the reattachment length. The turbulence intensity values are highest for the case of solid normal plate (bleed air is absent) and are lowest for the case of 50% perforation of the normal plate (bleed air is maximum in the present study). From the analysis of data it is observed that $\sqrt{\overline{u^{{\prime}2}}}/(\sqrt{\overline{u^{{\prime}2}}})_{max}$, (the ratio of RMS velocity fluctuation to maximum RMS velocity fluctuation), is uniquely related with dimensionless distance y/Y', (the ratio of distance normal to splitter plate to the distance where RMS velocity fluctuation is half its maximum value) for all the perforated normal plates. It is interesting to note that for 50% perforation of the normal plate, the RMS pressure fluctuation in the flow field gets reduced to around 60% as compared to that for solid normal plate. Analysis of the results show that the ratio [$C^{\prime}_p$ max/$-C_{pb}(1-{\eta})$], where $C^{\prime}_p$ max is the maximum coefficient of fluctuating pressure, $C_{pb}$ is the coefficient of base pressure and ${\eta}$ is the perforation level (ratio of open to total area), for surface RMS pressure fluctuation levels seems to be constant and has value of about 0.22. Similar analysis show that the ratio $[C^{\prime}_p$ max/$-C_{pb}(1-{\eta})]$ for flow field RMS pressure fluctuation levels seems to be constant and has a value of about 0.32.

• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.529-537
• /
• 2006

본 논문에서는 식생된 개수로 흐름의 수치모의에 필요한 항력가중계수의 영향을 분석하였다. 이를 위해 시간 및 공간 평균기법을 이용하여 식생된 개수로 흐름에서 레이놀즈응력의 수송방정식을 유도하였다. 그 결과 총 레이놀즈응력은 시간의 변동 성분에 의한 레이놀즈응력과 공간상의 변동 성분에 의한 레이놀즈응력의 합이며, 총 레이놀즈응력의 수송방정식을 수치모의하기 위한 항력가중계수의 값은 $C_{fk}$ = 1.0인 것으로 나타났다. 그러나 시간의 변동 성분에 의한 레이놀즈응력을 수치모의하기 위해서는 거의 영에 가까운 항력가중계수를 갖는 것으로 나타났다. 이는 과거의 수치모의 연구에서 항력가중계수의 값이 거의 영에 가까울 때 실험결과와 잘 일치했는지에 대한 중요한 이유이다. 즉, 공간상의 변동성분에 의한 레이놀즈응력의 값은 실험을 통해 측정하기 매우 어렵기 때문에 식생된 개수로 흐름에서 측정된 레이놀즈응력은 대부분 시간상의 변동성분에 의한 레이놀즈응력이기 때문이다. 또한 레이놀즈응력모형을 이용하여 항력가중계수에 따른 식생된 개수로 흐름을 수치모의하고 기존의 실험 결과와 비교하였다. 그 결과 평균유속과 레이놀즈응력의 경우 항력가중계수의 영향은 작은 것으로 나타났으나, 난류강도 분포에서는 항력가중계수의 영향이 매우 크게 발생하였다. 또한 총 레이놀즈응력과 시간의 변동성분에 의한 레이놀즈응력의 수송방정식에서 각 항의 수지분석을 통하여 항력가중계수가 난류강도에 미치는 영향을 분석하였다.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1997년도 한국생물과학협회 학술발표대회
• /
• pp.147.2-147
• /
• 1997

No Abstract, See Full Text

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2016년도 추계 학술발표논문집
• /
• pp.223-227
• /
• 2016

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.522-530
• /
• 2001

An experimental study of compressible jet flows has been undertaken in a small transonic wind tunnel. The aim of this investigation was to realize a jet simulator in the framework of wing/nacelle integration research and to characterize the jet flow behavior. First, free jet configuration, and subsequently jet flow in co-flowing air stream configuration were analyzed. Flow conditions were those encountered in a typical flight condition of a generic transport aircraft, i.e. fully expanded sonic jet flows interacting with a compressible external flowfield. Conventional experimental techniques were used to investigate the jet flows-Schlieren visualization and two-component Laser Doppler Velocimetry (LDV). The mean and fluctuating properties were measured along the jet centerline and in the symmetric plane at various downstream locations. The results of two configurations show remarkable differences in the mean and fluctuating components and agree well with the trend observed by other investigators. Moreover, these experiments enrich the database for such flow conditions and verify the feasibility of its application in future aerodynamic research of wing/nacelle interactions.