• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.66-73
• /
• 2021

This study presents a novel four-channel light-emitting diode (LED) current balancing topology using a current-fed hybrid quasi-Z-source converter. With the proposed structure, currents flowing through four LED strings are automatically balanced owing to the charge (amp-sec) balance condition on capacitors. Thus, automatic current balancing of the proposed driver is simple and precise. In addition, the proposed LED driver uses only one active switch and three diodes. The operating principle and characteristics of the proposed four-channel LED driver are analyzed in detail. To verify the operation of the proposed LED driver, a prototype is built and tested with different numbers of LEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.931-937
• /
• 2003

The principle of the superconducting vortex flow transistor (SVFT) is based on control of the Abrikosov vortex flowing along a channel. The induced voltage is controlled by a bias current and a control current, instead of external magnetic field. The device is composed of parallel weak links with a nearby current control line. We explained the process to get an I-V characteristic equation and described the method to induce the external and internal magnetic field by the Biot-Savarts law in this paper. The equation can be used to predict the I-V curves for fabricated device. From the equation we demonstrated that the current-voltage characteristics were changed with input parameters. I-V characteristics were simulated to analyze a SVFT with multi-channel by a computer program.

• Journal of the Korean association of regional geographers
• /
• v.14 no.1
• /
• pp.27-39
• /
• 2008

The propose of this research paper is to clarify the formative process of the lake-like swamps formed in channels of Nakdong-gang river and its tributary, Gumho-gang river. In order to understand the formative process of lake-like swamps, I compared topographical maps of three years(1918, 1962, 2005), analyzed the outline change of swamps, and draw their cross-sectional view and analyzed the horizontal distribution of particle size. Results of analysis are as follow. First, Saegang swamp and Geumgang swamps are residual swamps which are formed in abandoned distributary channels of braided reach. In braided reach, tributaries wind freely to create a new channel or to eliminate a old channel. Second, the Ssiksil swamp and Nat swamp are yazoo-type swamps. Their stream channels run parallel to the natural levees, as it blocks the waterway of a effluent tributary flowing from backward mountains to main stream. Third, the Secheon, Hochon and Jinchon swamps are backswamp behind natural levee. As main stream overflows, natural levee and back swamp are formed. Later flowing water of next bigger flood enter through natural levee into backswamp, create a channel following backswamp.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.259-262
• /
• 2003

Superconducting flux flow transistor(SFFT) is based on a control of the Abrikosov vortex flowing along a channel. The induced voltage by moving of the Abrikosov vortex in SFFT is greatly affected by the thickness and width, of channel. In order to fabricate a reproducibility channel in SFFT, we have researched the variation of the critical characteristics of YBCO thin films with the etching time using ICP(Inductively coupled plasma) system. It was certified that the velocity of vortex decreased with increasing the width of channel and was saturated faster in low bias from a simulation. An etching mechanism of YBCO thin films by ICP system was also certified by AFM(Atomic Force Microscope) and by measuring the critical current density with etching time. As measurement result, we could analyze that we should optimize the etching thickness of channel part to construct a flux flow transistor with desired characteristics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.179-187
• /
• 2018

In order to understand the flow of currents around Aphae Island and the surrounding Archipelago, the numerical model experiments on tidal currents and tide-induced residual currents were carried out. Dominant semidiurnal tidal currents have a reversing form and flow along the narrow channels of the archipelago. During periods of flood, currents flow from the west of Hwawon Peninsula to the archipelago to the northwest together with the currents flowing from the channels at Palgeum Island to Amtae Island and Amtae Island to Jeung Island. Ebb currents flow from the northwest archipelago to the channel of Amtae Island and Jeung Island as well as Amtae Island to Palgeum Island, further flowing south between Palgeum Island and Hwawon Peninsula. Flood currents are separated from east and west at the southern coast of Aphae Island, but flow south from both the west and east of Aphae Island to the channel found between Palgeum Island and Hwawon Peninsula at ebb. Flow speed is high between Amtae Island and Aphae Island where the flows meet and join. Lee wakes or topographical eddies are formed around the islands due to the high speed of the currents flowing along the narrow channel in the archipelago, manifesting as a tide-induced residual current. A weak cyclonic wake and anti-cyclonic eddy both exist at the west and northwestern coast of Aphae Island individually. The speed of the tide-induced residual current become slow on account of the wide littoral zone at exists around Aphae Island.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.3
• /
• pp.129-137
• /
• 2002

In this study, evaporation pressure drop experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-22. An experimental refrigerant loop has been established to measure the evaporation pressure drop of R-22 in a vertical P&SHE. The flow channels were formed by stacking three plates having a corrugated channel of a chevron angle of 45 dog. The R-22 flows down in one channel exchanging heat with the hot water flowing up in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality were explored in detail. During the experiment, the quality change between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.15. The present data showed that two types of P&SHE have similar trends. The pressure drop in-creases with the vapor quality for both types of P&SHE. At a higher mass flux, the Pressure drop is higher for the entire range of the vapor quality. Also, the increase in the average heat flux increases the pressure drop. Finally, at a higher system pressure, the pressure drop is found to be slightly lower compared to the lower system pressure.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.10
• /
• pp.930-938
• /
• 2001

In this study, evaporation pressure drop experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-22. An experimental refrigerant loop has been established to measure the evaporation pressure drop of R-22 in a vertical P&SHE. The flow channels were formed by adding three plates having a corrugated channel of a chevron angle of $45^{\circ}$. The R-22 flows down in one channel exchanging heat with the hot water flowing up in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality were explored in detail. During the experiment, the quality change between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.15. The present data showed that two types of P&SHE have similar trends. The pressure drop increases with the vapor quality for both types of P&SHE. At a higher mass flux, the pressure drop is higher for the entire range of the vapor quality. Also, the increase in the average heat flux increases the pressure drop. Finally, at a higher system pressure, the pressure drop is found to be slightly lower.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.19-25
• /
• 2005

To use land more efficiently under urbanization trend, Kangwon Province often covers open channels of creeks and uses them as parking lots or roads. A covered open channel section tends to form a rectangular culvert. Therefore, a creek with covered open channels can function as a storm drain. At the time of light rainfall, there are no significant differences except water flowing pattern between a creek with a covered open channel and a creek without it. Recently, however, the frequent occurrence of heavy rainfalls limited at a small, definite area has become problematic. When the heavy rainfall causes the carrying capacity of a creek to be exceeded,the creek with covered open channel has a more serious problem than the creek without it has. Therefore, we made an interpretation of data and conducted hydraulic model experiment to come up with economical solution to this problem.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.3
• /
• pp.87-95
• /
• 1980

일정한 압력으로 유지한 수직관속을 흐르는 유체의 응고에 관한 현상을 이론적으로 규명하고, 이미 얻은 실험 결과와 비교함으로서 그 정확성을 검토하였다. 관속을 흐르는 유체가 얼어서 완전히 관을 막을 때까지 요하는 시간을 산출하는 공식을 유도 하였으며, 관이 완전히 막힐 때 까지 흘러내리는 유체의 양을 추정하는 방법도 제시하였다. 본 연구에서 제시한 공식의 적용 가능범위도 아울러 검토하였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.243-246
• /
• 2003

The connection channel for Saemangeum district is to link the lakes between Keumkang Lake and Saemangeum Lake and to dilute the polluted water flowing from Mankyung river, to accelerate desalinization in Saemangeum lake, and to satisfy the future demand of water around Saemangeum district. Therefore, this study is to investigate the surplus water in Keumgang Lake after supplying the current agricutural, life, and industrial water and to check the possibility to divert the surplus water to Saemangeum Lake