• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.22-22
• /
• 2010

Eutectic composition phase with low melting point which solidifies at the final stage affects the solidification cracking at the intercellular or interdendritic area of welds and castings. If sufficient amount of eutectic composition liquid does not exist between the solidifying phases, the discontinuities remain as cracks. However, abundant amount of liquid eutectic composition existing in the final stage can flow into the discontinuities easily and heal the cracks. By flowing of liquid eutectic and healing of discontinuities, the possibility of cracking can be reduced when the amount of eutectic liquid is sufficient. For the solidification of pure metals, liquid eutectic does not exist and the interlocking of growing solid phases can be realized without interruption of liquid film. Therefore there is little possibility of solidification cracking in the case of welds and castings of pure metal. In a practical sense, the effective way to reduce or prevent the solidification cracking is making the composition of molten pool or melts near to the eutectic composition.

• Journal of Environmental Science International
• /
• v.28 no.11
• /
• pp.1005-1017
• /
• 2019

Environmental factors and changes in phytoplankton community structure before (August 5, 2017), during (August 18 and 25) and after (August 30 and September 15) freshwater input were analyzed to investigate the effects of freshwater input from Ganwol and Bunam lakes located in the upper part of Cheonsu Bay. Due to the large amount of freshwater input in the Cheonsu Bay, the surface salinity of the bay decreased by more than 8 psu, and the thermocline existing in the bay during August weakened. In addition, hypoxic phenomena occurred temporarily in the bay as the low oxygen water mass from the freshwater lakes flowed into the bay, and chemical oxygen demand, nutrients, and N/P increased with freshwater inflow. The density of phytoplankton during the freshwater inflow increased owing to their input from the freshwater lakes. Diatom species (Eucampia zodiacus) dominated the phytoplankton community in the bay before freshwater input; nanoflagellates, chlorophyta, cyanobacteria, and diatoms (Pseudonitzschia delicatissima, Chateocceros spp.) entered during freshwater input; and after freshwater inflow ended, diatoms (Chateocceros spp.) again became predominant indicating a return to previous conditions. The amount of phytoplankton standing crops increased sharply due to the inflow of freshwater species into the bay on the second day of discharge compared to before freshwater input; pre-discharge conditions were restored at most stations except at some sites close to the Bunam Lake three days after discharge. Therefore, the large amount of freshwater flowing into the bay affects not only the geochemical circulation in the bay but also the phytoplankton community structure. In particular, the high concentration of nutrients in the freshwater lake affect the marine ecosystem of the bay during August.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.4
• /
• pp.243-250
• /
• 2017

A fire phenomenon of a solid such as wood involves a phenomenon in which solid is heated from the outside and the gas generated through the thermal pyrolysis process of the material is burnt. The thermal pyrolysis phenomenon of the solid is a phenomenon in which the amount of energy incident from the outside, the amount of heat dissipation of the solid material, the heat transfer between the solid material and the surroundings including the amount of heat transfer to the air adjacent to the solid surface, and the fraction of oxygen in the air. In this paper, we calculate the required ignition temperature to simulate the fire phenomenon as simple as possible. By using cone calorimeter, the ignition time was measured by variously controlling the heat flux flowing into the wood specimen by using various wood specimens. The user friendly program is developed for calculation of the ignition temperature. Five different woods such as low density MDF, high density MDF, plywood, douglas fir and PB with various thickness are considered. The ignition temperatures suggested in this paper can be used for fire propagation analysis for woods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.45-58
• /
• 2015

The aim of this study is to find out major accumulation zones through field survey and moving route tracking trials on floating debris of Nakdong River. It also identified composition and accumulated amount of the floating debris by sample survey for accumulation zones. As a result, total 5 accumulation zones were selected from the midstream and downstream of the Nakdong River. There was a large amount of floating debris, including vegetation debris, in the accumulation zones. And two accumulation zones located in the downstream region, it is much more likely to flow into the ocean along river. From the sample survey on the major accumulation zones, more than $40{\ell}$ of floating debris were collected including vegetation and artificial debris. As a result of composition analysis for artificial debris, plastic(49%) and styrofoam(36%) were the majority in number. The present study is expected to help to plan an efficient pre-collecting activity and to reduce floating debris flowing into the ocean from the Nakdong River.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.340-345
• /
• 2003

This study, as a basic study for establishing a influence forecasting/estimating model when drain the deep sea water to the ocean after using it, carried out studies as follows; 1) estimating the amount of river discharge and pollutant loads inflowing into the developing region of deep sea water in East Sea, Korea 2) a field observation of tidal current, vertical distribution of water temperature and salinity, and 3-D numerical experiment of tidal current to analysis physical oceanographic status. The amount of river discharge flowing into the study area was estimated about $462.6{times}10^{3}m^{3}/day$ of daily mean in 2002 year. annual mean pollutant load of COD, TN and TP were estimated 7.02 ton-COD/day, 4.06 ton-TN/day and 0.39 ton/day, respectively. Field observation of tidal current results usually show about $20{\sim}40cm/sec$ of current velocity at the surface layer, it indicated a tendency that the current velocity decreases under 20cm/sec as the water depth increases. We could find a stratification within approximately the depth of 30m in field observation area, and the depth increases. We could find a stratification within approximately the depth of 30m in field observation area, and the differences of water temperature and salinity between the surface layer and bottom layer were about $18^{\circ}C$ and 0.8 psu, respectively. On the other hand, we found that there was a definite as the water mass of deep sea water about 34 psu of salinity.

• Journal of the Korean Ceramic Society
• /
• v.28 no.10
• /
• pp.767-776
• /
• 1991

Effects of the additions of SiB4 as burnable poison to UO2 on the green density, densification, interdependence between density-grain growth and microstructure of sintered UO2 were studied. UO2 pellets were sintered in flowing hydrogen, at temperature 1200, 1350, 1500, and 168$0^{\circ}C$ for 3 hours and at 168$0^{\circ}C$ for 0, 1, 3, and 10 hours, respectively. Green densities were in the range of about 4.5~5.4 g/㎤, and decreased as the amount of SiB4 increased when green pellets were made by with use of a double action press at 1000 kg/$\textrm{cm}^2$. The density of sintered UO2 pellets was around 92~94% of the theoretical density and did not change significantly as the amount of SiB2 addition increased. However, the density of sintered pellets decreased with the increase in SiB4. The grain growth could be characterized in terms of two stages: Grain growth occurred with the increasing density in the first stage, whereas the second stage was characterized by the grain growth without increasing of density. A liquid phase was observed at grain boundaries and grain edges in the microstructure of sintered UO2 pellets with 5000 ppm and 10,000 ppm SiB4. This liquid, possible formed at about 168$0^{\circ}C$, did not enhance the shrinkage, but appeared to accelarate the grain growth. It seems that the second stage grain growth was due to the presence of pressurized insoluble trapped gas in isolated pores.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.14-19
• /
• 2005

As a basic study for establishing the input conditions of a forecasting/estimating model, used for deep-sea water drainage to the ocean, this study was carried out as follows: 1) estimating the amount of river discharge and pollutant loads into the developing region of deep sea water in the East Sea, Korea, 2) a field observation of tidal current, vertical water temperature, and salinity distribution, 3) 3-D numerical experiment of tidal current to analyze the physical oceanographic status. The amount of river discharge flowing into this study area was estimated at about $462.7{\times}103 m\^3/day$ of daily mean in 2002. Annual mean pollutant load of COD, TN, and TP were estimated at 7.02 ton-COD/day, 4.06 ton-TN/day, and 0.39 ton/day, respectively. Field observation of tidal current normally shows 20-40cm/sec of current velocity at the surface layer, and it decreases under 20cm/sec as the water depth increases. We also found a stratification condition at around 30m water depth in the observation area. The differences in water temperature and salinity, between the surface layer and the bottom layer, were about 18 C and 0.8 psu, respectively. On the other hand, we found a definite trend of 34 psu salinity water mass in the deep sea region.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.139-149
• /
• 2019

As of 2018, a large amount of Chinese fine dust is flowing into Korea in westerlies. However, the amount of fine dust generated in Korea can not be ignored. Even 52% of the causes of fine dust are domestic factors. Especially in Seoul, where the population is densely populated, the dust levels are high enough to be comparable to other regions. In Seoul, the dust levels are different from each other district. In order to understand the difference of fine dust generation by distinction, it is judged based on the highest traffic volume among the causes of fine dust generation in Seoul. Comparing the traffic volume and the fine dust concentration in 2017, it is possible to know the effect of traffic volume actually, how much it affects.

• Journal of Korean Society on Water Environment
• /
• v.37 no.3
• /
• pp.175-189
• /
• 2021

In this study, 48 streams in the Sapgyo Watershed were selected, and the Load Duration Curves (LDC) were drawn up for each stream using water quality and flow monitoring over the last three years (2018-2020), and it was evaluated whether the target water quality was achieved for each flow section. As a result of evaluating whether or not the target water quality exceeded according to the LDC, it was found that 22 rivers exceeded the target water quality. Five rivers exceeded the target water quality due to point pollutant sources, 13 rivers exceeded the target water quality due to non-point pollutant sources, and 4 rivers exceeded the target water quality due to both point and non-point pollutant sources. Among the rivers that exceeded the target water quality due to point pollutant sources, which included domestic sewage of the untreated population, there is a need to reduce the influx of polluted loads by the untreated population. The use of eco-friendly fertilizers is recommended for rivers with a relatively high farmland ratio among rivers exceeding the target water quality due to non-point pollutant sources, and installation of boiling point reduction facilities that can reduce the amount of polluted load introduced during rainfall or manage water shores. In rivers with a large number of livestock breeding heads, the livestock houses located in these rivers need to be preferentially transferred to livestock manure treatment plants. Due to the high ratio of land area because of urbanization, initial rainwater treatment facilities are required to reduce the amount of pollutant load flowing into the river through the impermeable layer during rainfall.

• Journal of Environmental Science International
• /
• v.17 no.6
• /
• pp.601-609
• /
• 2008

In this study for the development of area due to the increasing of industry, population and spreading of urbanization is rapidly increasing but about seventy percent of our nation's areas consists of the mountainous districts. In such case, when those areas have the heavy rains break, they are washed away by a fast-flowing stream of a valley and overflowed. Thus it could result on human life and property damage and also the widespread of flood damage in the downstream area. To decrease those damage, the construction of flood control reservoir is necessary. This research was aim to construct the flood runoff models of a mountainous small district and to determine the probability rainfall by analyzing precipitation. The study also examined the effects of location and size of flood control reservoir on flood reduction. The result showed that the construction of detention basin was an effective way to ensure the safety of flood control and multiple detention basin had superior result for reducing amount of runoff in the down stream area than the single detention basin.