• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.197-201
• /
• 2011

This study was carried out to investigate cut flower quality bulb circumference and cultivars affecting 7 different cultivars to produce high quality cut flower lilies. To determine the effects of bulb circumference on growth and cut flower quality of 7 different cultivars, Lilium oriental hybrid 'Chilli', 'Ismael', 'Medusa', 'Mother's Choice', 'Siberia', 'Sorbonne', and 'Yelloween' were tested. After cut flower quality experiment, the highest 1st flower bud length and cut flower height were 'Medusa' and 'Mother's Choice' respectively. Most plants had over $30^{\circ}$ stem bending angle except for 'Mother's Choice', and 'Ismael'. The study shows that the bigger bulb circumference has the better 1st peduncle diameter, inflorescence length, stem diameter, number of flowers, and fresh weight. Bulb circumference affects the 1st flower bud length, cut flower height and number of flowers. Stem bending angle, however, is affected by neither bulb circumference nor cultivar. In conclusion, growth, cut flower quality and vase life were affected by the bulb circumference rather than cultivar.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2023

Roses are one of the most produced flower species in the world, and cut roses are produced in the greenhouses all year round. Recently, due to the increase in the temperature in the greenhouses in summer, the quality of cut roses is seriously deteriorated, such as shortening the stem length. This study was conducted to investigate the effects of the growing seasons on the qualities of cut roses and also to test the effect of cooling at night in high temperature season on the cut flower qualities of roses. Comparing the qualities and yields of cut roses for each season, the major cut flower qualities such as flower stem length, stem diameter and fresh weight were statistically significantly decreased in roses ('Pink Beauty' and 'Pink Shine') produced in summer. The yields didn't show a statistically significant difference in both cultivars. Investigating the cut flower qualities, the flower stem length increased by 15% for 'Pink Beauty', 11% for 'Ararat', and 12% for 'Pink Shine' when treated with cooling at night in warm season than the untreated control. In addition, when treated with cooling at night in warm season, the fresh weight of all three cultivars increased by 20-30% statistically significantly than conventionally cultivated control. It is expected that cooling at night in warm season will be helpful to improve the cut flower quality deterioration in summer.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.45-50
• /
• 2001

Stem firmness and flowering response of cut lily as influenced by medium composition (Control: Upland soil, Pt: Peatmoss, Pe: Perlite, Ve: Vermiculite, Rrh: Rotted rice-hull, RPt: Russian Peatmoss) were studied. For 'Casa Blanca', plant height and length of flower stalk increased when bulbs were planted in Pt:Rrh:Ve(1:1:1, v/v), and dried leaves of lower part plants decreased by RPt:Pe:Rrh(1:1:1, v/v). In case of 'Marco Polo' plant height and length of flower stalk increased with Pt:Rrh(1:1, v/v) as compared to other treatment, number of leaves and dried leaves increased when bulbs were planted in RPt:Pe:Rrh(1:1:1, v/v) as compared to control. Flowering of 'Casa Blanca' was promoted in Pt:Pe:Ve(1:1:1, v/v) and 'Marco Polo' was accelerated in Pt:Rrh:Ve(1:1:1, v/v). Flower length of 'Casa Blanca' was increased by RPt:Pe:Rrh(1 :1 :1, v/v) as compared with control and 'Marco Polo' was increased when bulbs planted to Pt:Rrh(1 :1, v/v). Flower-bud blasting of two cultivars was increased with Pt as compared with other treatment. Stem firmness of 'Casa Blanca' was increased by Pt:Pe:Ve (1:1 :1, v/v), and especially, stem firmness of upper part plants was increased by Pt:Rrh(1 :1, v/v) in 'Marco Polo' as compared to control plants. but generally, stem firmness of 'Casa Blanca' was not influenced with all cultural media as compared to control.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.3
• /
• pp.188-192
• /
• 1998

The correlations between growth charateristics and root yield were investigated in 74 peony lines collected from chief producing place in Korea. Among these peony lines, single flower type was 61% and the rest were double type. And pink flower was in majority. Stem length, stem diameter and number of stem per plant were $50{\sim}60cm$, $7{\sim}8mm$ and $5{\sim}6$, respectively. Generally, disease tolerance and root yield were better in single flower type peonies than double type. Among single flower type peonies, the correlation coefficients between each characteristics and root yield were as follows : number of stem $(0.676^{**})$, number of roots $(0.646^{**})$, stem length $(0.617^{**})$, root diameter $(0.590^{**})$ and root length $(0.443^{**})$. Correlation between root yield and paeoniflorin content was highly significant $(0.383^{**})$ among single flower type peonies and significant $(-0.382^*)$ among double flower type peonies. Correlation between stem diameter and root yield was not significant (0.066).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.318-318
• /
• 2022

Basil(Ocimum basilicum L.) is an annual herb that grows wild in hot and humid regions such as tropical Asia and Africa. This study was carried out for resource discovery, propagation, and DB construction of aromatic plants. In order to evaluate the genetic characteristics, 28 kinds of basil seeds were supplied from the Center for Genetic Resources. For basil characteristics, planting date, plant height, growth shape, leaf length, leaf shape, petiole color, petiole, stem color, flower color, after harvest, Ml length including roots, flower length, stem thickness and biological weight were measured. For anthocyanin analysis, only basil with purple color was selected, anthocyanins were extracted with 60% ethanol containing 1% citric acid, a standard quantitative curve was prepared with cyanidin-3-glucoside, and absorbance was measured at 525 nm. Basil planting started around June 16, and the flowering period lasted for a total of 18 days from July 19 to August 5. On August 6, when flowering was completed, morphological characteristics including flower color were measured at the site by an object. The measured basil plant length was 26.6-59.6 cm, leaf length 2.0-7.9 cm, leaf width 0.7-5.2 cm, and petiole 1.3-3.9 cm. The growth pattern of basil was generally straight, medium in shape. The color of the leaves was observed evenly by mixed green, purple, purple and green, and the recesses in the shape of the leaf were also conspicuously observed. A total of three basil flower colors were observed: white, light pink(149P 10P/84), and purple(37V 2.5RP 4/12). During the second growth survey after harvest, the total length including the basil roots is 26.7-52.0 cm, the flower length is 8.2-29.3cm, the stem thickness is 7.1-15.9mm, the number of stem nodes is 3-12 nodes, and the total weight of the basil was measured to be about 218-1540 g. There are a total of 16 types of basil expressed in purple, and the anthocyanin content was measured to be 73.74 ~ 380.72 mg/100g.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.3
• /
• pp.179-184
• /
• 2009

The correlation and combining abilities related with plant spreading characteristics of plant height, plant width, stem length, internode length, number of stem, number of leaves, and number of flower were studied in the $F_1s$ of 10 crosses from the partial five-parent diallel cross in Petunia hybrida. The plant width showed highly positive correlation with internode length, and number of flower. The mean squares of general combining ability(GCA) and specific combining ability(SCA) were highly significant for plant width, number of stem, number of leaves, and number of flowers. The mean square values of GCA were greater than those of SCA for all the characters, showing preponderance of additive gene actions for these characters. The lines of D and I for plant width and length of stem showed relatively high GCA effects. The crosses of $D{\times}I$, $F{\times}I$, and $G{\times}I$ exhibited high SCA effects on plant width, especially $G{\times}I$ effected in internode length and number of flower. The broad sense heritability was generally high compared to narrow sense one. Plant width and stem length, and internode length related to spreading growth showed the higher heritability than the other characters in the broad and narrow sense.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.2
• /
• pp.99-109
• /
• 1985

The present studies were carried out to obtain some basic informations of the breeding of tobacco varieties. Genetically divergent 8 varieties, 3 flue-cured, 2 burley and 3 sun-cured tobaccos, were used in half diallel cross. In order to analyze the heterosis, combining abilities, modes of inheritance and correlations for some agronomic and chemical characters, 8 parents and 28 $F_1$ were tested. The results obtained were summarized as follows: The percentages of heterosis for stem diameter, internode length and total sugar content in $F_1$ hybrid were 3.6%, 3.1% and 10.6%, whereas these for days to flower, total alkaloids and leaves per plant were -6.3%, -6.9% and -5.0%, respectively. Yield had significant positive genotypic correlations with plant height, days to flower and leaf length, but negative with internode length and total sugar content. It also had significant prositive phenotypic correlations with plant height, days to flower, leaves per plant, leaf length, leaf width and leaf shape index (Leaf length/leaf width). General (GCA) and specific combining abilities (SCA) for all characters of $F_1$ hybrid were significant. The effects of GCA were positive on yield, plant height, stem diameter, leaves per plant and days to flower of Burley 21. And those were positive on yield, leaf shape index and plant height, but negative on leaves per plant and total nitrogen of Hicks. The effects of SCA for yield and leaves per plant were greater than those of others on the combinations of Coker 139 and Burley type, respectively.

• Journal of Biosystems Engineering
• /
• v.28 no.3
• /
• pp.231-238
• /
• 2003

Rose and chrysanthemum are the most popular flowers in Korean floriculture. Sorting flowers is a labor intensive operation in cultivation of the cut flowers and needed to be mechanized. Machine vision is one of the promising solutions for this purpose. This study was carried out to develop hardware and software of a cut flower sorting system using machine vision and to test its performance. Results of this study were summarized as following; 1. Length of the cut flower measured by the machine vision system showed a good correlation with actual length of the flower at a level of the coefficients of determination (R$^2$) of 0.9948 and 0.9993 for rose and chrysanthemum respectively and average measurement errors of the system were about 2% and 1% of the shortest length of the sample flowers. The experimental result showed that the machine vision system could be used successfully to measure length of the cut flowers. 2. Stem diameter of the cut flowers measured by the machine vision system showed a correlation with actual diameter at the coefficients of determination (R$^2$) of 0.8429 and 0.9380 for rose and chrysanthemum respectively and average measurement errors of the system were about 15% and 7.5% of the shortest diameter of the sample flowers which could be a serious source of error in grading operation. It was recommended that the error rate should be considered to set up grading conditions of each class of the cut flowers. 3. Bud maturity of 20 flowers each judged using the machine vision system showed a coincidence with the judgement by inspectors at ranges of 80%∼85% and 85%∼90% for rose and chrysanthemum respectively. Performance of the machine vision system to judge bud maturity could be improved through setting up more precise criteria to judge the maturity with more samples of the flowers. 4. Quality of flower judged by stem curvature using the machine vision system showed a coincidence with the judgement by inspectors at 90% for good and 85% for bad flowers of both rose and chrysanthemum. The levels of coincidence was considered as that the machine vision system used was an acceptable system to judge the quality of flower by stem curvature.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.39-40
• /
• 2001

This experiment was conducted to investigate the effect of root zone heating on the growth of cut minirose Rosa hybrida L. ′Little Marble′ in winter season. Effects of four different root zone temperatures of 16, 20, 24$^{\circ}C$ and non-heating control on the growth and productivity were compared. Harvested cut-flowers were measured for stem length, stem diameter, fresh and dry weights, numbers of leaves, stems and flowers, days to flower, and chlorophyll concentration. The results showed that mean height was the greatest at 16$^{\circ}C$. Days to flower was the shortest at 24$^{\circ}C$. Fresh and dry weights of top (shoot＋leaf＋flower), shoot and leaf were the greatest at 2$0^{\circ}C$. Stem and flower numbers were the greatest at 16$^{\circ}C$, but leaf number was the greatest at 2$0^{\circ}C$. Mean cut flower yield was the greatest at 16$^{\circ}C$. Chlorophyll concentration was slightly higher at 16$^{\circ}C$, but was not significantly different among the treatments. Stem diameter was the greatest at 2$0^{\circ}C$. Dry matter was the greatest at 24$^{\circ}C$. Total yield of cut rose stems increased with increasing temperature. Combined heating could save 24% in fuel cost as compared to the air heating alone. The results obtained suggested that optimal root zone temperature for the growth of cut rose "Little Marble" was 2$0^{\circ}C$, and the greenhouse heating energy can be saved by minimal air heating combined with root zone heating to 2$0^{\circ}C$.

• Journal of Biosystems Engineering
• /
• v.24 no.1
• /
• pp.67-74
• /
• 1999

A prototype cut-flower sorter was developed and tested for its performance with five varieties of roses. Support plates driven by a chain mechanism transported the roses into an image inspection chamber. Color image processing algorithms were developed to evaluate the length, thickness, and straightness of stem and color, height, and maturity of bud. The average absolute errors of the system for the measurements of stem length, stem thickness, and height of bud were 19.7 mm, 0.5 mm, and 3.8 mm, respectively. The results of classification by the sorter were compared with those of a human inspector for straightness of stem and maturity of bud. The classification error for the straightness of stem was 8.6%, when both direct image and reflected image by a mirror were analyzed. The accuracy in classifying the maturity of bud varied among the varieties, the smallest for‘Nobless’(1.5%) and the largest for‘Rote Rose’(13.5%). The time required to process a rose averaged 2.06 seconds, equivalent to the capacity of 1,600 roses per hour.