• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.437-444
• /
• 2005

This paper presents a robust aeroelastic control methodology of a two dimensional flapped wing system exposed to an incompressible flow field. A robust controller is designed using a linear matrix inequality (LMI) approach for the multiobjective synthesis. The design objectives are to achieve a mix of $H_{\infty}$ performance and H₂ performance satisfying constraints on the closed loop pole locations in the presence of model uncertainties. Numerical examples are presented to demonstrate the effectiveness of LMI approach in damping out the aeroelastic response of 3-DOF flapped wing system.

• Journal of Agricultural Extension & Community Development
• /
• v.24 no.2
• /
• pp.99-115
• /
• 2017

The purpose of this study is to analyze potential adoption rates and reusing patterns of the new rice direct seeding technology. The model constructed and employed in this study is a system dynamics model of farmer adoption and reusing patterns for this new technology over time. The model incorporates a causal loop diagram that explains interactions among rice cultivation subsystems with feedback loops and further attempts to build a causal loop model with stock-flow diagram for computer simulation. As one example of how the model can be used to provide insight to rice farmers, simulations are run over varying levels on the cultivation process of rice. The major finding is to demonstrate the utility of system dynamics simulation methodology in aiding the rice wet direct seeding farmers' decision making.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1629-1638
• /
• 2016

Differential power processing (DPP) systems are among the most effective architectures for photovoltaic (PV) power systems because they are highly efficient as a result of their distributed local maximum power point tracking ability, which allows the fractional processing of the total generated power. However, DPP systems require a high-efficiency, high step-up/down bidirectional converter with broad operating ranges and galvanic isolation. This study proposes a single, magnetic, high-efficiency, high step-up/down bidirectional DC-DC converter. The proposed converter is composed of a bidirectional flyback and a bidirectional isolated switched-capacitor cell, which are competitively cheap. The output terminals of the flyback converter and switched-capacitor cell are connected in series to obtain the voltage step-up. In the reverse power flow, the converter reciprocally operates with high efficiency across a broad operating range because it uses hard switching instead of soft switching. The proposed topology achieves a genuine on-off interleaved energy transfer at the transformer core and windings, thus providing an excellent utilization ratio. The dynamic characteristics of the converter are analyzed for the controller design. Finally, a 240 W hardware prototype is constructed to demonstrate the operation of the bidirectional converter under a current feedback control loop. To improve the efficiency of a PV system, the maximum power point tracking method is applied to the proposed converter.

• Korean System Dynamics Review
• /
• v.3 no.1
• /
• pp.43-60
• /
• 2002

This paper describes the forecast of wholesale price in competitive Korean electricity market using the system dynamics approach. The system dynamics concepts have been implemented with the Ithink software. This software facilitates the development of stock and flow model with information feedback. Using this model, the future wholesale electricity price can be computed hour by hour, quarterly, and yearly. This model also gives the energy planner the opportunity to create different scenarios for the future of deregulated wholesale markets in Korea. Also It will lead to increased understanding of competitive wholesale market as a complex, dynamic system. Research results show that the plant construction appeared in waves of boom and bust in Korean electricity market like real estate construction. That is, the Korea wholesale market's new power plants and the market price will appear the Boom and Bust cycle. It is very similar behavior as real estate industry. In case of consideration of DSM program, The DSM savings lead to a somewhat different timing of the booms in construction and of price spikes. But the DSM programs do not eliminated the fundamental dynamics of the boom and bust. And the wholesale price is maintained at the lower level compared to the case of without DSM program. However, the unexpected result is found that due to the lower market price, Investor make significantly less investment in new CCs, which leads to the higher wholesale price after 2010. It suggests that the DSM Policy must be implemented with the dynamics of competitive Electricity Market.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.357-357
• /
• 2000

In this study, we consider a multi-input multi-output styrene polymerization reactor system for which the monomer conversion and the weight average molecular weight are controlled by manipulating the jacket inlet temperature and the feed flow rate. The reactor system is identified by using a linear subspace identification method and then the output feedback model predictive controller is constructed on the basis of the identified model. Here we use the Best Linear Unbiased Estimation (BLUE) filter as a stochastic estimator instead of the Kalman filter. The BLUE filter observes the state successfully without any a priori information of initial states. In contrast to the Kalman filter, the BLUE filter eliminates the offset by observing the state of the augmented system regardless of a priori information of the initial state for an integral white noise augmented system. A BLUE filter has a finite impulse response (FIR) structure which utilizes finite measurements and inputs on the most recent time interval [i-N, i] in order to avoid long processing times.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.298-307
• /
• 2016

In the building process of FPSOs(floating production, storage and offloading units) is the increasing demand of high performance piping joints that can be installed on its turret system and maintain smooth and long-term flow of ultra-high pressure crude oil, being subjected to external excitations such as wind and wave on the sea. Following such a trend, in this paper, a new-type piping joint of four effective degrees of freedom has been designed, and its dynamic characteristics predicted through mathematical modeling and computer simulations. Moreover, via an example it was shown how the yaw motion in particular can be independently controlled for future durability test despite strong kinetic couplings.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.410-420
• /
• 2016

The geometric dimension and shape of microchannels that are formed during surface texturing are widely studied for applications in flow control, and drag and friction reduction. In this research, a new method for controlling the deformation of U channels during micro-rolling-based surface texturing was developed. Since the width of the U channels is almost constant, controlling the depth is essential. A calibration procedure of initial rolling gap, and proportional-integral PI controllers and a linear interpolation have been applied simultaneously to control the depth. The PI controllers drive the position of the pre-U grooved roll as well as the rolling gap. The relationship between the channel depth and rolling gap is linearized to create a feedback signal in the depth control system. The depth of micro channels is studied on A2021 aluminum lamina surfaces. Overall, the experimental results demonstrated the feasibility of the method for controlling the depth of microchannels.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4291-4310
• /
• 2015

This paper investigates the traffic offloading over unlicensed bands for two-tier multi-mode small cell networks. We formulate this problem as a Stackelberg game and apply a hierarchical learning framework to jointly maximize the utilities of both macro base station (MBS) and small base stations (SBSs). During the learning process, the MBS behaves as a leader and the SBSs are followers. A pricing mechanism is adopt by MBS and the price information is broadcasted to all SBSs by MBS firstly, then each SBS competes with other SBSs and takes its best response strategies to appropriately allocate the traffic load in licensed and unlicensed band in the sequel, taking the traffic flow payment charged by MBS into consideration. Then, we present a hierarchical Q-learning algorithm (HQL) to discover the Stackelberg equilibrium. Additionally, if some extra information can be obtained via feedback, we propose an improved hierarchical Q-learning algorithm (IHQL) to speed up the SBSs' learning process. Last but not the least, the convergence performance of the proposed two algorithms is analyzed. Numerical experiments are presented to validate the proposed schemes and show the effectiveness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.3
• /
• pp.886-905
• /
• 2012

Set-top Box (STB) has evolved from being a device just sitting on top of a TV shelf to a device providing a gateway to the Internet for a home network, receiving services from multiple content providers, and enabling and ensuring Quality of Service (QoS) for the streaming media. IP Multimedia Subsystem (IMS), with its promise to provide a converged access network for multimedia service delivery (such as Triple play & Quadruple play services), has to guarantee QoS support. To enable QoS in IMS-based networks, we have designed a set-top box which provides feedback to the service provider to ensure end-to-end QoS. Our set-top box is designed to provide virtual platforms such that it can support multiple service providers. Each service provider is able to manage its own multimedia streams and ensures the desired network performance for each flow. The set-top box also works as a Home Gateway and provides end-to-end QoS support to the client nodes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.481-484
• /
• 2007

This paper presents a method of constructing the system-on-chip(SoC) based on embedded systems. The proposed method is more compact and effectiveness than former methods. The requirements generation start high level performance simulation and then passes to an executable specification suitable for implementation using a hardware/software co-design tool. The reuse of pre-exiting components is supported, as well as synthesis of the system interface, but only after much work is done to program the hardware/software co-design tool. The actual design flow described allows feedback among all design levels, e.g. from implementation up to requirements, throughout the process. In the future, it is necessary to development the advanced method of constructing system-on-chip based on embedded systems.