• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.3
• /
• pp.77-91
• /
• 2005

Purpose : Trichosanthis Radix is traditional medical herb which has been shown to inhibit tumor cell proliferation. In this study, the effects of Trichosanthis Radix extract were investigated on inducing growth inhibition and apoptosis of human uterine cervical carcinoma cells. Methods : Human uterine cervical carcinoma cells line, ME-180, was used for the study. The cells were treated with varying concentrations of Trichosanthis Radix extract. Cell growth and inhibitory rate were measured by MTT assay. Apoptosis induction was detected by fluorescence microscopy, DNA ladder formation and flow cytometry. Results : Trichosanthis Radix extract inhibited the growth of human uterine cervical carcinoma cells in a dose-dependent manner. It induced ME-180 cells to undergo apoptosis including fragmented nuclei and nucleosome-sized DNA fragmentation. Flow cytometric analysis showed the increasing rate of apoptotic cells by Trichosanthis Radix extract. Reduction of mitochondrial membrane potential and increase in caspase-3 activity and were found in ME-180 cells treated with Trichosanthis Radix extract. Conclusion : Our data suggest that Trichosanthis Radix extract inhibit the growth and proliferation of ME-180 cells by apoptotic induction and facilitates its activity via caspase-3 activation initiated by depolarization of mitochondria.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.80-82
• /
• 2005

This paper presents the characteristics analysis of an electromagnetic pump using a linear induction motor(LTM). The characteristics of the pump for three molten metals Is analyzed by the magneto hydro dynamics: flow velocity, flow mass and etc. The result of the analysis is that the flow velocity for three molten metals is over 0.3[m/s] at the center of duct.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.142-144
• /
• 1999

This work deals with an application of linear induction motor. In the process of making steel, the molten zinc is required to flow by electromagnetic force. For this purpose, the characteristics of a single sided linear induction motor are analyzed at various conditions.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.7
• /
• pp.299-306
• /
• 2003

Doubly-Fed Induction Generator(DFIG) is adequate to maximize the energy capture from wind energy, whereby the turbine speed can be adjusted to a speed, at which a rated tip speed ratio be kept. In this paper, a power analysis for DFIG and its characteristics of power flow in grid-connected operation, are dealt with in speed range of super- and sub-synchronous region. In a test of the machine, whereby a doubly excited circuit configuration in stator as well as rotor with back to back PWM inverter have been equipped, a constant input torque is given and in that condition, power new in stator and rotor circuit have been measured and compared with theoretical value. Furthermore, the power factor in stator and rotor circuit have been examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.75-76
• /
• 2008

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.226-229
• /
• 2006

Process design has been performed for the warm hydroforming of light weight alloy tubes. For the heating of tubes, specially designed induction heating system has been adopted to ensure rapid heating of tubes. The induction heating system uses 30kHz frequency induction coil in order to concentrate the energy in the tube and prevent the energy loss. But the induced heat by the integrated heating system, consisting of induction coil, tube, pressure oil and dies, was normally not equally distributed over the length and circumference of the tube specimen, and consequent temperature distribution was non-uniform. So additional heating element has been inserted into the inside of the tube to maintain the forming temperature and reduce temperature drop due to heat loss to the molds. And for that heat loss, a heat insulation system has also been installed. The drop in flow stress at elevated temperatures results in lower internal pressure for hydroforming and lower clamping forces. The proposed warm hydroforming process has been successfully implemented when applying 6061 aluminum extruded tubes.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.6
• /
• pp.13-17
• /
• 2009

Ejector is an equipment devised for making use of the low pressure occurring from the fast fluid injection and it is a transportation equipment which can obtain vacuum using the kinetic energy of the fluid. This ejector system is, nowadays, widely used for construction machinery, heavy equipments, the cooling and ventilation of electronic devices and for the various fluid transportation and pumps. In this study, it is attempted to perform a numerical analysis and an experiment to find out the characteristics of fluid quantity, velocity and the pressure distribution of the induction pipe by changing the length and the radius ratio of the nozzle of ejector. From the results, it is investigated that the distributions of velocity and pressure of induction pipe attached are changing with the length and the radius ratio of the nozzle. In addition, it is shown that for the small and large ejector, the efficiency is the maximum when the length of the nozzle arrived to the neck of the ejector, however, if it is installed at below or above the neck the efficiency is rather decreased.

• Journal of Korea Water Resources Association
• /
• v.49 no.1
• /
• pp.51-60
• /
• 2016

The purpose of this study is to examine the control function of discharged flow due to the shape and plane arrangement of permeable submerged breakwater. For the discussion on it in detail, 3-dimensional numerical model based on PBM (Porous Body Model), which is able to simulate directly interaction of Fluid Permeable structure Seabed has been used to simulate water discharge in a NWT (Numerical Water Tank). To verify the applicability, LES-WASS-3D is analyzed comparing to the experimental result about propagation characteristics of dam-break wave through a permeable structure. Using the results obtained from numerical simulation, the effects of the shape and plane arrangement of submerged breakwater on reducing velocity and flow induction have been discussed related to the mean flow distribution and vertical distributions of horizontal velocities around ones.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.477-486
• /
• 2011

The objective of this study is to investigate the water pollution problems brought about by the construction of eco-friendly waterfront space through the physical model experiment including water quality consideration. Due to the lack of water supply into the artificial ponds and canals, the water quality problems such as eutrophication, odor and so on can be occurred. There have been many numerical models on such phenomena but limited studies using physical test due to the difficulty in the verification of physical interpretation of the study area. In this study, a prototype model that is not affected by the dimensionless parameters was carried out, where unpolluted water is mixed into the contaminated water to reduce the concentration of nutrients. In addition, this study also attempt to find the optimal configuration of the flow induction machines using the scale model which will evaluate and verify the effectiveness of the enforcement methods to maintain the water quality objectives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.544-549
• /
• 2017

This paper aims to examine the effect of rotational fluid motion about the efficiency of the gas - liquid ejector, which is a core unit in a ship equilibrium water treatment system. The ejector is a device for injecting ozone into ship equilibrium by the negative pressure generated by exchange of momentum between water and ozone. The existing ejector ejects the driving fluid with a simple form. In this paper, however, a rotation induction device is applied to the driving nozzle so that the driving fluid can be rotated and injected. To investigate the flow characteristics by the rotational movement of the driving fluid, CFD was used. The pressure and flow rate of the driving fluid, the negative pressure and suction flow rate of the suction fluid in the suction part, and the discharge pressure were predicted. On the basis of the results, the efficiency of the ejector using the rotation induction system was 22.25%, which was about 1.7% better than that of the existing ejector. Finally, to verify the feasibility of the CFD, an experiment was conducted on the ejector using the rotation induction device and the results were similar to those of the CFD.