• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.325-325
• /
• 2018

The main purpose of this study is to suggest the more reliable flow direction methods within the framework of DEM by investigating the existing methodologies. To this end SFD(single flow direction method), MFD(multiple flow direction method) and IFD(Infinite flow direction method) are applied to determination of flow direction for water particles in Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation. As the main results the different patterns of flow accumulation are found out from each application of flow direction methods. As the flow dispersion increases on DEM contributing areas to outlet grow in sequence of SFD, IFD, MFD but contribution of individual pixels into outlet decreases. Especially MFD and IFD tend to make additional hydrologic abstraction from rainfall excess due to the flow dispersion within flow paths on DEM. Based on parameter estimation for power law distribution by maximum likelihood flow accumulation can be thought of as scale invariance factor. Combination of several flow direction methods could give rise to the more realistic water flow on DEM through separate treatment of flow direction methods for dispersion and aggregation effects of water flow within different topographies.

• 한국물환경학회지
• /
• 제34권4호
• /
• pp.391-398
• /
• 2018

The main purpose of this study is to suggest and recommend the more reliable flow direction methods within the framework of DEM and power law distribution, by investigating the existing methodologies. To this end SFD (single flow direction method), MFD (multiple flow direction method) and IFD (Infinite flow direction method) are applied to analyze the determination of a flow direction for the water particles as seen in the Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation in that region. As the main results revealed, the study showed the different patterns of flow accumulation are found out from each applications of flow direction methods utilized in this study. This brings us to understand that as the flow dispersion on DEM increases, in this case the contributing areas to the outlet grow in sequence of SFD, IFD, MFD, but it is noted that the contribution of individual pixels into outlet decreases at that time. In what follows, especially with the MFD and IFD, the result tends to make additional hydrologic abstraction from rainfall excess, as noted due to the flow dispersion within flow paths on DEM. Based on the parameter estimation for a power law distribution, which is frequently used for identify the aggregation structure of complex system, by maximum likelihood flow accumulation can be thought of as a scale invariance factor. In this regard, the combination of flow direction methods could give rise to the more realistic water flow on DEM, as revealed through the separate flow direction methods as utilized for dispersion and aggregation effects of water flow within the available different topographies.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.31-38
• /
• 2005

Three-dimensional flow over the sand dunes have been studied numerically by using Large-Eddy Simulation (LES) method. In the direction of initial flow and span direction cyclic boundary conditions are imposed for velocity and pressure. The movement of the sand dune which is formed by converging wind direction has been investigated. The numerical method employed in this study can be divided into three parts: (i) calculation of the air flow over the sand dune using standard MAC method with a generalized coordinate system; (ii) estimation of the sand transfer caused by the flow through the friction; (iii) determination of the shape of the sand surface. Since the computational area has been changed due to step (iii), (i)-(iii) are repeated. The simulated dune, which has initially elliptic cross section, extends at the converging direction, which is known as linear dunes.

• 유변학
• /
• 제11권2호
• /
• pp.153-158
• /
• 1999

가스사출시 두개이상의 가스흐름가능방향이 존재 할 때 가스는 선택적인 방향으로 흐르게는데 여기에서는 이 가스흐름 방향을 예측하는 방법을 제시하였다. 지금까지는 가스흐름방향은 가스의 하류에 있는 수지의 저항값, 즉 압력손실필요량을 비교하여 예측되어 왔는데 이방법은 대부분의 경우에 정확한 예측력을 가지고 있었다. 그러나 수지의 저항값 또는 압력손실필요량을 비교하는 방법이 실제에는 경우에따라 맞지 아니하였다. 이 연구에서는 수지속도비교가 압력손실필요량비교 보다 한단계위의 판단기준(criterion)이 되는 것을 설명하고 그예를 들어 증명 하고 있다. 압력손실필요량비교 대신 수지속도비교방법을 쓰면 예외없이 모든 경우 정확하게 가스흐름방향을 예측을 할수 있다.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.412-415
• /
• 2005

The recent requirement for faster and more frequent solutions has encouraged the consideration of parallel implementations using decentralized processors. Distributed multi-processor environments can potentially greatly increase the available computational capacity and decrease the communication burden, allowing for faster Optimal Power Flow (OPF) solutions. This paper presents a mathematical approach to implementing distributed OPF using the alternating direction method (ADM) to parallelize the OPF. Several IEEE Reliability Test Systems were adopted to demonstrate the proposed algorithm.

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.933-942
• /
• 2021

홍수시 하천의 유속을 효율적이고 안전하게 측정할 수 있는 방법의 하나로 제시된 것이 표면 영상유속측정법이다. 표면영상유속측정법에는 영상분석 기법에 따라 다양한 종류가 있으나, 이 중에서도 최근 일정시간 동안의 유속의 시간평균을 한 번에 산정할 수 있는 시공간영상 유속계측법이 하천의 표면유속 측정에 대한 연구가 활발히 진행되고 있다. 시공간영상 유속계측법은 일정 시간 동안의 시공간 영상을 한 번에 분석하기 때문에, 유속산정 시간을 획기적으로 줄일 수 있는 장점이 있다. 그러나 시공간영상 유속계측법은 주흐름방향을 정확히 알지 못하면 오차를 유발할 수 있다. 본 연구는 표면영상을 시간적으로 누적한 시공간체적을 구성하고, 이 시공간체적에서 시간축 방향으로 최대값 영상을 만든 뒤 이를 고속푸리에변환하여 주흐름방향을 탐색하는 새로운 기법을 제안하였다. 이 방법은 공간영상에서 주흐름방향을 찾는 첫단계와 주흐름방향의 시공간영상에서 유속의 크기를 산정하는 두번째 단계로 구성되어 있다. 첫번째 단계에서 찾아낸 주흐름방향으로 시공간영상을 작성하고, 이 시공간영상의 고속푸리에변환을 이용하여 유속을 산정하였다. 제안된 방법은 주흐름방향을 정확하게 추정하여 시공간영상을 생성하고 분석하므로, 기존 방법들이 취약했던 이차원 흐름에 대해서도 신속하고 정확한 유속분석이 가능하다. 개발된 방법을 공동흐름에 대한 인공영상에 적용한 결과 비교적 정확하게 2차원 유속분포 측정이 가능한 것으로 나타났다.

• Coupled systems mechanics
• /
• 제13권3호
• /
• pp.247-275
• /
• 2024

The paper studies the influence of the fluid flow velocity and flow direction in the initial state on the dispersion of the axisymmetric waves propagating in the inhomogeneously pre-stressed hollow cylinder containing this fluid. The corresponding eigenvalue problem is formulated within the scope of the three-dimensional linearized theory of elastic waves in bodies with initial stresses, and with linearized Euler equations for the inviscid compressible fluid. The discrete-analytical solution method is employed, and analytical expressions of the sought values are derived from the solution to the corresponding field equations by employing the discrete-analytical method. The dispersion equation is obtained using these expressions and boundary and related compatibility conditions. Numerical results related to the action of the fluid flow velocity and flow direction on the influence of the inhomogeneous initial stresses on the dispersion curves in the zeroth and first modes are presented and discussed. As a result of the analyses of the numerical results, it is established how the fluid flow velocity and flow direction act on the magnitude of the influence of the initial inhomogeneous stresses on the wave propagation velocity in the cylinder containing the fluid.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1424-1428
• /
• 1999

This paper presents a mathematical decomposition coordination method to implementing the distributed optimal power flow (OPF), wherein a regional decomposition technique is adopted to parallelize the OPT. The proposed approach is based on the Alternating Direction Method (ADM), a variant of the conventional Augmented Lagrangian approach, and makes it possible the independent regional AC-OPF for each control area while the global optimum for the entire system is assured. This paper is an extension of our previous work based on the auxiliary problem principle (APP). The proposed approach in this paper is a completely new one, however, in that ADM is based on the Proximal Point Algorithm which has long been recognized as one of the attractive methods for convex programming and min-max-convex-concave programming. The proposed method was demonstrated with IEEE 50-Bus system.

• 대한의용생체공학회:의공학회지
• /
• 제8권1호
• /
• pp.75-80
• /
• 1987

With the conventional CW Doppler velocity meter, bl-directional velocities cannot be separated. The new CW Doppler system uses quadrature detection and phase rotation to produce simultaneous independent audio and velocity signals for forward and reverse blood flow direction, is fabricated. Specially, this system shows that phase rotation method for flow direction separation provides easy and satisfactory feature. From in vivo blood flow measurement, we can easily differentiate typical artery flow from vein flow, and measure both velocity characteristics qualitatively.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.59-64
• /
• 2017

Diverter is an essential element in gravimetric calibration method of flowmeter. Error of diverter are influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. That's why, time detection position of diverter is tuned through repetitive test for minimizing error of diverter. Further the diverter must be compared with the other institutions test since the influence on the accuracy of the flow meter used in the test. In this paper, errors (flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location) of diverter are decreased by produced uni-direction diverter and error of gravimetric calibration system is decreased. Uni-direction diverter is calibrated by gravimetric calibration system with precision flowmeter, the flowmeter is calibrated by pipe prover and other institutions and uni-direction diverter is evaluated. Uni-direction diverter is not influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. As a result, Uni-direction diverter can calibrate in wider scope since increasing ratio of maximum and minimum flow rate of uni-direction diverter.