• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.355-363
• /
• 2023

The main purpose of this study is to characterize the size-dependent strain rate sensitivity in structural steel using the continue stiffness measurement (CSM) indentation. A series of experiments, such as CSM indentation and optical microscope examination, has been performed at the room temperature at different rate conditions. The results indicated that indentation hardness, strain rate, and flow stress showed size-dependent behavior. The dependency of indentation hardness, strain rate, and flow stress on the indentation size was attributed to the transition of the dislocation nucleation rate and the dislocation behaviors during the indentation process. Since both hardness and strain rate showed the size-dependent behavior, SRS tended to depend on the indentation depth. The results indicated that the SRS was quite high over 2.0 at the indentation depth of 240 nm and quickly dropping to 0.08, finally around 0.046 at large indents. The SRS values at large indentations strongly agree with the general range reported for several types of low-carbon steel in the literature (Chatfield and Rote 1974, Nguyen et al. 2018b, Luecke et al. 2005). The results from the present study can be used in both static and dynamic analyses of structures as well as to assess and understand the deformation mechanism and the stress-state of material underneath the indenter tip during the process of the indentation testing.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.93-100
• /
• 2013

본 연구에서는 트윈박스 단면인 이순신대교의 레이놀즈수 변화에 따른 공기력의 영향을 살펴보는데 그 목적이 있다. 이를 위하여 1/30 대축척 모형을 제작하여 공군사관학교 아음속 중형 풍동에서 최대 풍속 70m/s까지 풍속을 증가시켜가면서 공기력을 측정하여, 전북대학교 소형풍동에서 수행한 저레이놀즈수 풍동실험 결과와 비교하였다. 본 연구 대상 교량 단면은 레이놀즈수의 영향을 받는 것으로 나타났으며, 고레이놀즈수 실험 결과 기존 저레이놀즈수 실험보다 항력계수는 약 23%정도 낮은 수준인걸로 나타났다. 또한 경계층 촉진장치를 효과적으로 이용하면 기존의 저레이놀즈수 풍동실험 조건에서 고레이놀즈수 모사 실험이 가능한 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제31권4호
• /
• pp.387-394
• /
• 2020

A parametric study of a 2.5 kW class propeller type micro hydraulic turbine was performed. In order to analyze the internal flow characteristics in the hydraulic turbine, three dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used and the hexahedral grid system was used to construct computational domain. To secure the reliability of the numerical analysis, the grid dependency test was performed using the grid convergence index method based on the Richardson extrapolation, and the grid dependency was removed when about 1.7 million nodes were used. For the parametric study, the axial distance at shroud span (L) between the inlet guide vane and the runner, and the inlet and outlet blade angles (β₁, β₂) of the runner were selected as the geometric parameters. The inlet and outlet angles of the runner were defined in the 3 spans from the hub to tip, and a total of 7 geometric parameters were investigated. It was confirmed that the outlet angles of the runner had the most sensitive effect on the power and efficiency of the micro hydraulic turbine.

• 한국식품과학회지
• /
• 제28권3호
• /
• pp.538-544
• /
• 1996

미생물이 생산하는 생물 고분자의 기능성 당색 및 용도 재발 연구의 일환으로. Bacillus sp.의 알카리 발효에 의해 생합성된 점성의 생물 분자의 리올로지 특성을 다른 미생들 다당 및 식뮬 다당류와 비교하면서 검토하였다. 1% 정제 고분자 용액은 xanthan gum 및 guar gum과 마찬가지로 항복응럭을 갖는 의가소성 유체의 거동을 널었다. 유동지수(n)값은 0.41 - 0.75로 전단속도 의존성을 보였으며, 점조도지수(K)값은 0.87 Pa $s^n$으로 guar gum보다는 작고 xanthan gum 보다는 컸다. 그러나 항복응력 (${\tau}_y$)값은 2.28Pa로 xanthan gum이나 guar gum보다 크게 낮았다. 또 정제고분자의 점조도지수(K)값은 지수 함수식에 따르는 농도 및 온도 의존성을 나타내었다. 농도 의존성은 기울기가 서로 달라지는 두 개의 직선관계를 나타냈으며, 농도가 증가에 따라 의가소성은 강해졌다. 시료 용액은 온도 의존성이 매우 낮은 특징을 나타내었고, 유동의 활성화에너지지는 1.16kcal/g mol이었다. 겉보기 점도는 pH와 염의 변화에 매우 불안정함을 나타내었으나 유기용매에 대하여는 어느 정도 안정함을 보였고, 점증제를 첨가하였을 때 겉보기 점도의 상승효과는 관찰되지 않았다.

• 한국정보과학회논문지:정보통신
• /
• 제30권2호
• /
• pp.143-154
• /
• 2003

분산 이동 시스템은 단순한 통신 기능에서 작업 흐름 관리, 화상회의, 복제 데이터의 관리, 자원 할당 둥의 서비스를 제공하는 시스템으로 급속히 확대.발전하고 있으며, 이러한 서비스를 제공하는 어플리케이션들은 사용자의 요구를 반영하기 위해 메시지를 인과적 순서로 전달해야 한다. 인과적 메시지 전달을 제공하는 기존의 방법들은 많은 피기백(piggyback) 정보로 인한 통신 오버헤드 혹은 어플리케이션으로 전달하는 메시지의 지연, 이동 호스트의 증가에 대한 확장성, 이동 호스트가 계산의 대부분을 수행하는 둥의 문제점이 있다. 이 논문은 기지국과 이동 호스트 사이의 종속 정보 행렬을 기지국이 유지하며, 즉각 선행자 메시지(immediate predecessor message)에 대한 종속 정보만을 각 메시지에 피기백 하는 방법을 통해 기존 기법의 문제점을 해결하는 효율적인 인과적 메시지 전달 기법을 제안한다. 제안하는 알고리즘은 이전의 알고리즘들과 비교해서 낮은 메시지 오버헤드를 가지며, 메시지를 전달할 때 불필요한 지연(inhibition)을 발생시키지 않는다. 또한 기지국에서 알고리즘의 대부분을 수행하도록 함으로써 이동 호스트의 자원제약과 무선 통신의 낮은 대역폭을 고려하고, 이동 호스트 단위로 인과적 메시지 전달을 이행함으로써 발생하는 처리 지연(processing delay)을 줄여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2279-2284
• /
• 2007

This study is intended to analyze the effect of thin ink-film thickness around rotating printing roll on the printing quality in the gravure printing process which is used for making electronics circuit like a RFID tag with a conductive ink. The present work numerically estimates the film thickness around rotating roller partially immersed in ink, for which the volume of fluid (VOF) method was adopted to figure out the film formation process around rotating roller. Parameter studies were performed to compare the effect of ink viscosity, surface tension, roller rotating speed, immersed angle on the film thickness. The result indicates that the film thickness has a strong dependency on the fluid viscosity, while the surface tension has negligible effect.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.299-304
• /
• 2001

An approach is developed for parametric investigation of the influence of the surface roughness on thermohydrodynamic analysis with film conditions which systemically occur in journal bearings. A parametric investigation is performed for predicting the bearing behaviors such as pressure and temperature distributions in lubricating films between the stationary and moving surfaces determined by absorbed layers and interfaces on the statistical method for rough surface with Gaussian distribution. The layers expressing the effects of surface roughness are expressed as functions of the standard deviations (${\sigma}$) of each surface and surface orientation (j) to explain the flow patterns between both rough surfaces. The coupled effect of surface roughness and shear zone dependency on hydrodynamic pressure and temperature has been found by solving the present model in non-contact mode and contact mode, respectively.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.357-362
• /
• 1996

LOFT LBLOCA test, LP-02-6 was analyzed using RELAP5/MOD3.2. It has a distinguished thermal-hydraulic phenomenon of a positive bottom-up core flow in tile blowdown phase. A modified nodalization which is based on that used in LP-LB-1 calculation by Lubbesmeyer was used in the calculation. RELAP5/MOD3.2 predicted overall system hydraulic behavior relatively well. However, the bottom-up quenching in the middle part of the core was not predicted sufficiently. It was demonstrated also that the peak cladding temperature can be predicted well by adjusting a discharge coefficient. But more improvements are needed in order to apply this code to actual plants with less user dependency.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.316-321
• /
• 1997

The mixing vane effect on the Critical Heat Flux (CHF) is discussed with focus on the vortex now effect. In the subchannel approach, this effect is not quantified by the calculation model, but directly taken into account by the CHF correlation itself through data analysis. The vortex now effect is identified the two Westinghouse correlations, and then the CHF margin issue given rise to by the Vantage-5H design change is evaluated and discussed. It is noted that deficiency about CHF dependency on the vortex flow effect could induce an error in the Departure from Nucleate Boiling Ratio (DNBR) sensitivity Calculation.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1155-1163
• /
• 2006

Calculation was carried out for phase velocity and deformation wave decay in a layer of viscoelastic material fixed tightly on the solid substrate. Analysis has been performed regarding the inner structure of the wave, i.e., the proportions between the vertical and horizontal displacements and their profiles. The wave characteristics depend strongly on media compressibility factor. The effect of viscous losses on parameters of the main oscillation mode was studied in detail. Results were compared with the model of coating with local deformation. A new experimental approach was made in order to measure such wave properties of a compliant coating as the dependency of deformation wave velocity on frequency and decay factor was made. The method for estimation of coating parameters enabling the drag reduction in turbulent flow was then refined.