• 한국경영과학회지
• /
• 제24권2호
• /
• pp.1-15
• /
• 1999

This research involves the development and evaluation of a work flow control model for a type of flexible manufacturing system(FMS) called a flexible flow line(FFL). The control model can be considered as a kind of hybrid intelligent model in that it utilizes both computer simulation and neural network technique. Training data sets were obtained using computer simulation of typical FFL states. And these data sets were used to train the neural network model. The model can easily incorporate particular aspects of a specific FFL such as limited buffer capacity and dispatching rules used. It also dynamically adapts to system uncertainty caused by such factors as machine breakdowns. Performance of the control model is shown to be superior to the random releasing method and the Minimal Part Set(MPS) heuristic in terms of machine utilization and work-in-process inventory level.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.371-375
• /
• 2009

The distribution control of refrigerant flow is one of the basic technique to enhance system efficiency. However, if engineers forget to control the refrigerant flow speed in all operation range, refrigerant flow mal distribution becomes a noise source. The refrigerant flow noise should be checked and controlled at the lowest air flow mode which is the most silent mode and frequently used in night time.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.933-944
• /
• 1996

In this paper, two new techniques, the pattern filling and the refined flow field regeneration, based on the finite element method and Eulerian mesh advancement approach have been developed to analyze incompressible viscous flow with free surfaces. The gorerning equation for flow analysis is Navier-Stokes equation including inertia and gravity effects. The penalty and Newton-Raphson methods are used effectively for finite element formulation. The flow front surface and the volume inflow rate are calculated using the pattern filling technique to select an adequate pattern among five filling patterns at each quadrilateral control volume. By the refined flow field regeneration technique, the new flow field which renders better prediction in flow surface shape is generated and the velocity field at the flow front part is calculated more exactly. Using the new thchniques to be developed, the dam-breaking problem has been analyzed to predict flow phenomenon of fluid and the predicted front positions versus time have been compared with the reported experimental result.

• 한국항행학회논문지
• /
• 제11권1호
• /
• pp.31-36
• /
• 2007

TCP(Transmission Control Protocol)는 인터넷 환경에서 널리 사용되고 있는 프로토콜의 하나이다. TCP는 흐름제어를 통해 데이터의 손실 및 재전송을 줄여 효율성을 높일 수 있으며, 이러한 흐름제어는 데이터 패킷 크기의 제한을 두는 윈도우 기법을 통해 이루어지고 있다. 흐름제어 방식에 의해 TCP는 다양한 버전으로 구분되어 있는데, 본 논문에서는 대표적인 Tahoe, Reno와 Reno의 개량형인 Newreno에 에러모델을 적용한 시뮬레이션 결과를 통해 그 성능을 분석하였다.

• 정보과학회 논문지
• /
• 제42권6호
• /
• pp.713-722
• /
• 2015

OSS(Open-Source Software)의 사용 증가와 함께 라이선스 위반, 취약한 소스코드 재사용 등에 의한 분쟁 및 피해가 빈번해지고 있다. 이에, 실행파일(바이너리) 수준에서 프로그램에 OSS 모듈이 포함되었는지 여부를 확인하는 기술이 필요해졌다. 본 논문에서는 바이너리에서 함수 수준의 특징정보를 사용하여 OSS 모듈을 탐지하는 기법을 제안한다. 기존 소프트웨어 특징정보(버스마크) 기반 도용 탐지 기법들은 프로그램 전체 간 유사성을 비교하기 때문에 프로그램의 일부로 포함된 OSS 모듈들을 탐지하는데 부적합하다. 본 논문에서는, 함수 수준의 실행명령어, 제어 흐름 그래프(Control Flow Graph)와 개선된 함수 수준 구조적 특징정보를 추출하고 유사성을 비교하여 OSS 모듈의 임의 사용 여부를 탐지한다. 제안기법의 효율성과 각 특징정보들의 OSS 탐지 성능을 평가하기 위해, 특징정보량, OSS 모듈 탐지 시간 및 정확도, 컴파일러 최적화에 대한 강인성을 실험하였다.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.235-245
• /
• 1998

This paper presents the fuzzy optimization model based scheduling methodology for the efficient production control of a FFS(FIexible Flow Shop) under the uncertain production environment. To develop the methodology, a fuzzy optimization technique is introduced in which the uncertain production capacity caused by the random events like the machine breakdowns or the absence of workers is modeled by fuzzy number. Since the problem is NP hard, the goal of this study is to obtain the near optimal but practical schedule in an efficient way. Thus, Lagrangian relaxation method is used to decompose the problem into a set of subproblems which are easier to solve than the original one. Also, to construct the feasible schedule, a heuristic algorithm was proposed. To evaluate the performance of the proposed method, computational experiments, based on the real factory data, are performed. Then, the results are compared with those of the other methods, the deterministic one and the existing one used in the factory, in the various performance indices. The comparison results demonstrate that the proposed method is more effective than the other methods.

• 대한교통학회지
• /
• 제29권2호
• /
• pp.7-14
• /
• 2011

본선 교통류 제어 방안 중 가변속도제어 모형을 제시하고 서울 내부순환로를 중심으로 효과를 검증하였다. 차량 검지기로부터 수집된 데이터 보정 및 평활화 수행후 패턴분석을 통해 도시고속도로의 평일 상태를 4가지로 분류하고 중심 값을 산출하였다. 그리고 분석단위의 상태를 판단하기 위한 상태변수로 전이교통량, 평균밀도, 평균속도를 설정하였으며 제시된 모형과 시나리오에 근거하여 검증한 결과 안전성 및 효율성을 향상시킬 수 있었다. 또한 유입교통량에 따라 가변속도제어의 감속 정도와 유효 적용시간을 산출하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.49-55
• /
• 2010

Thermal flows inside a laser printer are affected by generated heat from a fuser and boards. Thus, the effect of fans has been investigated to control the thermal flows and behaviors of toners. In order to analyze the phenomena experimentally, a PIV (Particle Image Velocimetry) has been used, and then the flow inside the printer has been predicted by the CFD (Computational Fluid Dynamics) in this study to determine the efficient flow distribution by an optimum design of the printer. The determined optimum design has been confirmed by the developed PIV technique so that the efficiency of the laser printer can be improved by the proposed design.