• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.80-86
• /
• 2005

In order to control the transonic flow field with a shock wave, a condensing flow was produced by an expansion of moist air on a circular bump model and shock waves were occurred in the supersonic parts of the fields. Furthermore, the additional passive technique of shock-boundary layer interaction using the porous wall with a cavity underneath was adopted in this flow field. The effects of these methods on the shock wave characteristics were investigated numerically. The result showed that the flow fields might be effectively controlled by the suitable combination between non-equilibrium condensation and the position of porous wall.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.187-188
• /
• 2003

In order to control the transonic flow field with shock wave, a condensing flow was produced by an expansion of moist air on a circular bump model and shock waves were occurred in the supersonic parts of the fields. Furthermore, the additional passive technique of shock - boundary layer interaction using the porous wall with a cavity underneath was adopted in this flow field. The effects of these methods on the shock wave characteristics were investigated numerically. The result showed that the flow fields might be effectively controlled by the suitable combination between non-equilibrium condensation and the position of porous wall.

• 전자공학회논문지
• /
• 제54권2호
• /
• pp.61-67
• /
• 2017

이 논문에서는 협대역과 낮은 전송속도의 제약을 가진 수중의 다양한 환경에 적응적인 MAC 기법을 제안하였다. 이미 발표된 Underwater Packet Flow Control (UPFC) 기법은 전송회수와 전송시간을 이용한 세 가지 전송타입을 제안하여 일반전송, 블럭전송, 병렬전송이 가능하도록 설계되었으나 기존 머지전송을 보완하여 최대전송가능 페이로드를 기준으로 효율적인 큐잉방법에 대한 기법 Effective Queuing-UPFC (EQ-UPFC)을 제안하였다. 제안한 기법의 전송효율의 검증을 위해 수학적 모델을 제시하였으며 시뮬레이션을 수행하여 전송회수 및 전송량 대비 효율성의 증가를 검증하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.92-96
• /
• 2007

Internal flow characteristics for an automobile HVAC have been investigated using a high-resolution PIV technique. The PIV system consists of a 2-head Nd:YAG laser(125 mJ), a high-resolution CCD camera($2K\;{\times}\;2K$), optics and a synchronizer. An automobile HVAC module was used directly. Only the casing was remodeled transparently for capturing flow image and laser sheet beam illumination. Time-averaged velocity field were measured in three temperature control mode. For three temperature control modes, the internal flow characteristics for an automobile HVAC system were evaluated from PIV results..

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.1-12
• /
• 2001

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. Finally, the model experiment results are in good agreement with the FE simulation ones.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1366-1375
• /
• 2002

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. The model experiment results are in good agreement with the FE simulation ones.

• 소성∙가공
• /
• 제11권5호
• /
• pp.430-438
• /
• 2002

This paper suggests the new technology to control metal flow in orther to change of the cold forging from conventional deep drawing forming. This technology can be summarized the complex forming, which consists of bulk forming and sheet forming, and multi-action forging, which be performed double action press. The proposed technology is applied to hub clutch model which is part of auto-transmission for automobile. The purpose of this study is to investigate the material flow behavior of hub clutch through control the relative velocity ratio and the stroke of mandrel and punch using the flow forming technique. First of all, the finite element simulations are applied to analyse optimal process conditions to prevent flow defect(necking defect etc.) from non-uniform metal flow, then the results are compared with the plasticine model material experiments. The punch load for real material is predict from similarity law. Finally, the model material experiment results are in good agreement with the FE simulation ones.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5587-5594
• /
• 2012

불포화토 역학에 있어 흐름특성에 대한 규명은 지반공학적 문제들을 해결하는데 있어 매우 중요하다. 특히, 불포화토의 흐름특성을 모사하기 위한 첫 걸음이 되는 함수특성곡선의 측정을 위해서는 측정자의 오류를 최소화할 수 있는 신뢰성있고 편리한 기법이 필수적으로 요구되어진다. 플로우 펌프 시스템을 포함하여 현재까지 많은 연구자들은 함수특성곡선을 측정할 수 있는 다양한 기법들을 개발하였다. 본 연구에서는 기존에 제안되어진 플로우 펌프시스템을 활용한 흡입력 조절 기법을 이용하여 건조과정과 습윤과정에서 정확하게 실험 공시체의 함수특성곡선을 측정하였다. 플로우 펌프 시스템을 활용한 흡입력 조절 기법을 통하여 두 가지 시료의 함수특성곡선을 산정하였으며, 실험 결과를 바탕으로 흡입력 조절 기법은 현장 조건에 맞는 조건들을 실내에서 구현할 수 있으며 또한 건조과정과 습윤과정에서 발생하는 함수특성곡선의 이력현상을 규명하는데 적절한 장비인 것을 확인하였다. 특히, 플로우 펌프시스템을 활용한 흡입력 조절 기법은 자동화된 장비와 정밀도로 인하여 높은 정확도를 이끌어낼 수 있어 측정오차를 줄임과 동시에 측정시간을 절약하여 함수특성곡선을 측정할 수 있다.

• 유공압시스템학회논문집
• /
• 제4권4호
• /
• pp.8-14
• /
• 2007

The electro-hydraulic pump is usually used in testing equipments which require one control function. But until now, it is not applied to industrial equipments which are exposed to severe working environment and require various control functions. This paper proposes a technique which controls continuously flow, pressure and power by utilizing switching control mode. Mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1348-1358
• /
• 2004

The filling pattern and an adaptive grid refinement based on the finite element method and Eulerian mesh advancement approach have been developed to analyze incompressible transient viscous flow with free surfaces. The governing equation fur flow analysis is Navier-Stokes equation including inertia and gravity effects. The mixed FE formulation and predictor-corrector method are used effectively for unsteady numerical simulation. The flow front surface and the volume inflow rate are calculated using the filling pattern technique to select an adequate pattern among seven filling patterns at each tetrahedral control volume. By adaptive grid refinement, the new flow field that renders better prediction in flow surface shape is generated and the velocity field at the flow front part is calculated more exactly. In this domain the elements in the surface region are made finer than those in the remaining regions for more efficient computation. The collapse of a water dam and the filling of a fluidity spiral have been analyzed. The numerical results have been in good agreement with the experimental results and the efficiency of the adaptive grid refinement and filling pattern techniques have been verified.