• 한국안전학회지
• /
• 제30권3호
• /
• pp.52-58
• /
• 2015

As sudden rainfall has happened, the debris flow has occurred in the mountain area. Recently sudden rainfall occurred so frequently caused by abnormal climate. Thus debris flow hazard had consecutively increased damage because of debris flow. Recently, Enormous damage due to debris flow have occurred in Korea. Various studies have been conducted to prevent search debris flow hazard. This study was carried out for debris flow behavior according to the land slope on propagation. It is the important one among factors that are related to the propagation over the city with respect to debris flow discharge and depth. For the numerical simulations in this study, the land slope was varied of 5, 0, $-5^{\circ}$ to investigate the debris flow behavior with the FLO-2D, often recommended by FEMA to simulate debris flow. To verify the performance of FLO-2D, comparison with the USGS experiments (Iverson et al, 2010) was conducted. From numerical results the propagation length of the debris flow was found the most sensitive one. Maximum of debris flow thickness and velocity and structural vulnerabilities were investigated to the effect of land slope. They was became smaller according to land slope of 5, -5, $0^{\circ}$ in the order. As a result, debris flow behavior analysis about the effect of the land slope could contribute to understand the vulnerability of city for debris flow hazards.

• 유변학
• /
• 제11권2호
• /
• pp.143-152
• /
• 1999

본 연구에서는 Rheometrics Fluids Spectrometer(RFS II)를 사용하여 세 종류의 상용 반고형 식품(마요네즈, 토마토 케찹, 와사비)의 정상유동특성 및 소진폭 전단변형하에서의 동적 점탄성을 광범위한 전단속도와 각주파수 영역에서 측정하였다. 이들 측정결과로부터 정상유동특성의 전단속도 의존성 및 동적 점탄성의 각주파수 의존성을 보고하였다. 그리고 항복응력의 항을 갖는 몇 가지 점소성 유동모델을 사용하여 정상유동특성을 정량적으로 평가하고 이들 모델의 적용성을 비교.검증하였다. 나아가서 수정된 형태의 지수법칙 관계식을 도입하여 정상유동특성(비선형 거동)과 동적 점탄성(선형 거동)간의 상관관계에 대해 검토하였다. 이상의 연구를 통해 얻어진 결과를 요약하면 다음과 같다. (1) 반고형 식품류는 상당한 크기의 항복응력을 갖는 점소성 물질로서 전단속도가 증가할수록 정상류점도가 급격히 감소하는 shear-thinning 거동을 나타낸다. (2) Herschel-Bulkley 모델, Mizrahi-Berk 모델 및 Heinz-Casson 모델은 반고형 식품류의 정상유동거동을 잘 기술할 수 있다. 이들 중에서도 Heinz-Casson 모델이 가장 우수한 적용성을 갖는다 (3) 반고형 식품류는 임계 전단속도를 경계로 shear-thinning 특성이 변화한다. 즉 낮은 전단속도에 비해 높은 전단속도 영역에서 분산입자 응집체의 구조파괴가 더욱 활발하게 진행되어 보다 현저한 shear-thinning 특성을 나타낸다. (4) 저장 탄성률 및 손실탄성률은 양자 모두 각주파수가 증가할수록 점차로 증가하나 각주파수 의존성은 그다지 크지 않다. 또한 광범위한 각주파수 영역에서 탄성적 성질이 점성적 성질에 비해 보다 우세하게 나타난다. (5) 정상류점도, 동적점도 및 복소점도는 모두 power-law 모델의 거동을 잘 만족한다. 또한 정상유동특성과 동적 점탄성간의 상관관계는 수정된 형태의 지수법칙 관계식에 의해 잘 기술될 수 있다.

• 한국멀티미디어학회논문지
• /
• 제21권3호
• /
• pp.400-414
• /
• 2018

It is required for today's video contents to interact with a viewer in order to provide more personalized experience to viewer(s) than before. In order to do so by providing friendly experience to a viewer from video contents' systemic perspective, understanding and analyzing the situation of the viewer have to be preferentially considered. For this purpose, it is effective to analyze the situation of a viewer by understanding the state of the viewer based on the viewer' s behavior(s) in the process of watching the video contents, and classifying the behavior(s) into the viewer's emotion and state during the flow. The term 'Flow-emotion-state' presented in this study is the state of the viewer to be assumed based on the emotions that occur subsequently in relation to the target video content in a situation which the viewer of the video content is already engaged in the viewing behavior. This Flow-emotion-state of a viewer can be expected to be utilized to identify characteristics of the viewer's Flow-situation by observing and analyzing the gesture and the facial expression that serve as the input modality of the viewer to the video content.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.924-929
• /
• 1994

In using a performance model of a torque converter determined by its gemetric condition, it is possible that the analysis of two arbitrary converters produces the the same results because of the same value of equivalent parameters despite their different shapes. Therefore, it is necessary to understand the effect of shape factor on dynamic perfomance, and equivalent parameters reoresenting a performace model of a converter should into its defined by the behavior of flow field. In this study, torus flow of a torque converter is changed into its equivalent system defined by the behavior of flow, and govering equations for the system are presented and used for analysis. Equivalent parameters are obtained from the results of flow analysis and are compared with parameters of one dimensional performance model. The influence that shape change of a converter has on the behavior of flow and the equivalent parameters is studied qualitatively.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.318-323
• /
• 2006

We investigated the rheological behaviors and orientation of three different types of layered silicate composite systems under external flow: microcomposite, intercalated and exfoliated nanocomposites. Rheological measurements under shear and uniaxial extensional flows, two-dimensional, small-angle X-ray scattering and transmission electron microscopy were conducted to investigate the properties, as well as nano- and micro-structural changes, of polymer/layered silicate nanocomposites. The preferred orientation of the silicate layers to the flow direction was observed under uniaxial extensional flow for both intercalated and exfoliated systems, while the strain hardening behavior was observed only in the exfoliated systems. The degree of compatibility between the polymer matrix and clay determined the microstructure of polymer/clay composites, strain hardening behavior and spatial orientation of the clays under extensional flow.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.84-90
• /
• 2013

The hydrogen or oxygen gas producted by electrolysis become many bubbles in the electrolyte, but exact data on the behavior of these bubbles in the separator of an electrolysis stack didn't become known. In this study, the flow visualization experiment on the behavior of bubbles in the flow pattern of the array type separator is performed by using of a visible alkaline electrolysis stack and a stereoscopic microscope. As the results, a fine size bubbles adhered to the surface of the flow pattern grow to large sized bubbles until each bubble's buoyance is lager than the sum of external force and weight. And then the large bubbles flow into the upper area of the separator. Bubbles adhered to the surface of the vertical flow pattern grow quickly than them adhered to the surface of the horizontal flow pattern. Also, he electrolysis efficiency is declined because many multi-size bubbles occupied the wide volume in the flow pattern.

• 품질경영학회지
• /
• 제9권2호
• /
• pp.15-25
• /
• 1981

This paper deals with the experimental study on the behavior of fuel flow in intake manifold of gasoline engine. The main purpose of this study is an analysis of air stream velocity, behavior of liquid film flow, generation of atomization and atomization rate by using the basic apparatus which is manufactured the visible, straight tube type model of intake manifold. As the result, we have found factors which influenced on the behavior of liquid film flow in intake manifold.

• 소성∙가공
• /
• 제17권8호
• /
• pp.564-569
• /
• 2008

Strain hardening behavior during hydroforming has been experimentally investigated. The variation of flow stress was used as an index of strain hardening during respective processes and the flow stress was estimated from the correlationship between flow stress and effective strain. The local hardness after hydroformig was also predicted by effective strain. By using the inter-relationships between hardness-flow stress-effective strain at variable pre-strains, the strain hardening behavior during hydroforming has been successfully analyzed. The comparison of predicted hardness with measured hardness confirmed that the methodology used in this study was feasible and the strain hardening behavior can be quantitatively estimated.

• 한국컴퓨터정보학회논문지
• /
• 제28권7호
• /
• pp.145-153
• /
• 2023

본 연구는 통합적인 시각에서 대학 수업 연구의 주류인 자기조절학습과 학습 몰입 및 만족 간의 구조적 관계 모형에, 비교적 최근 보고되고 있는 딴짓의 구성 개념을 포함하는 연구이다. 본 연구에서는 자기조절학습, 딴짓, 상호작용, 몰입 및 만족으로 구성된 연구 모델을 제안하였다. 연구가설을 검증하기 위해 설문조사를 실시하였으며, 총 122부의 온라인 설문지를 수집하여 최종 통계분석에 사용하였다. 분석의 주요 결과를 살펴보면 첫째, 몰입은 만족을 예측하는 주요한 요인으로 일관되게 확인되었다. 둘째, 자기조절학습은 몰입에 유의한 영향을 미치는 것으로 나타났다. 셋째, 딴짓과 상호작용은 자기조절학습과 몰입간의 관계를 매개하는 것으로 밝혀졌다. 본 연구 결과는 몰입을 강화하는 데 있어 딴짓과 상호작용의 역할에 대한 통찰을 제공하고 몰입을 촉진하는 방법을 이해하는데 시사점을 제공한다.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.92-103
• /
• 1999

The fuel spray behavior in the intake port of an electronic control port irijection gasoline engine has a strong influence on engine performance, exhaust emission and fuel consumption. Thus, in this study, fuel spray behavior and flow characteristics of the air assist gasoline spray injected into a suction flow in a simulated rectangular intake port have boon investigated. Macro-behavior of spray characteristics was investigated by means of visualization and the measurements of SMD and velocity were made by PDPA. For analysis the flow field with droplets size, droplets are classified five droplets size groups. As a result, the normal distance of suction flow increasing, the relatively large droplets distribution and SMD increase because small droplets easily follow suction flow. Near impinging wail, after impinging against the wall, secondary atomized small droplets of D < $30{\mu}m$ bound from the wall. And the increasement of suction flow progress to the large droplets of D > $100{\mu}m$ distribution. Therefore, SMD are apparently increased near impinging wall, Z/d = 9.0.